Nexus 5 vibration trouble :(
Hello everyone ... on my Nexus 5 once again happened some incredible problem with vibration ... Here's the thing: Last night my Nexus just lay on the bed and when I took it, at this point I found the lack of vibration. First, I turned on Vibrate when pressing the navigation keys, and found no vibration. At first I began to sin on the vibrating motor, but I remembered that I was already have this problem a few months ago, in the same way. When I downloaded from the Market program to test the vibration and turned her to work constantly, I found that the vibration motor that works but is very weak, as if barely barely turns .. As if he did not have enough energy. But! Motor is spinning so bad until not "turn off the screen." After blocking in a few seconds the vibration motor is working again as if nothing had happened! As well and clearly. However, once you unlock it as soon as the problem returns, vibration works very poorly. I have tried different programs for vibration control, no result. Found a video on YouTube of the problem, attach below. If the problem is simply to reiterate, I would like to know the cause .. This problem is very infuriated me yesterday, vibration at all almost no and I missed a few calls. I understand the engine is all right and I think that this is some sort of deep software problem...
I have already booked two motors, then try to replace, but not sure it will help .. Phone never fell or dropped, handle carefully. (but the body have a little small scratches
) A very long time looking for information on this issue on the internet, but found nothing ..
I dont want to go to the service center, I want to understand itself, with your help, of course ..
Factory reset or Reflashing ROM to any other doesn't help too...
Model - D281 16GB white.
ROM - CM11 Snapshot M9
Kernel - ElementalX 1.04cm
Recovery - TWRP 188.8.131.52
Can not listen to what people say on the video, the main thing to hear the vibration motor.
P.S. Sorry for my bad english, I'm from Russia and I write through Google translator... Hope on your help, guys..