FLASH IT AT YOUR OWN RISK, IF YOUR DEVICE BRICK DON'T PM ME!!
This modified HBOOT will remove the red text that displayed on the boot/restart/recovery splash screen when you unlocked your Butterfly s
I just removed the red text in the HBOOT, no other changes.
I have this device and tested, it is 81000% proven to work
How to flash it?
1. Download the modified HBOOT by me below
2. Copy Red_text_PL68IMG.zip to your adb/fastboot directory
3. Restart your Butterfly s to fastboot mode (Hold Volume Down + Power Button, choose fastboot and press PWR Button again)
4. Enter these commands to the terminal/command prompt in the fastboot directory
fastboot devices (Check your Butterfly s whether connected to the computer or not)
fastboot oem rebootRUU (Reboot to RUU Mode)
fastboot flash zip Red_text_PL68IMG.zip (Flash the modified HBOOT zip to your Butterfly s)
Important: the flash process halts at around 75% to 90% on phone screen! This is normal and a safety precaution!
The last few percent is the reboot, which is NOT happening automatically, so you get a chance to check the console output before reboot to make sure it is safe to reboot!
The bar will only fill up to 100% once you type the following command:
After your type these commands, you are done, reboot your device to check the splash screen
Enjoy & Be cafeful you flash this HBOOT, it's will lose your warranty!
My Blog: http://a-wei.twgg.org/?p=310