FORUMS

Unable to fix MID after using HTC Dev

16 posts
Thanks Meter: 0
 
By iAmNotorious, Junior Member on 5th September 2014, 03:42 PM
Post Reply Subscribe to Thread Email Thread
While trying to flash the new RUU I got some bad advice and relocked my bootloader. To unlock it again I changed the cid to 1111111 and used HTC Dev to unlock again.

I've now changed my CID back to VZW__001, but my MID is still 0P6B20000. I've tried following these instructions: http://forum.xda-developers.com/show....php?t=2707627, but even after recieving this successful response:

Code:
17+0 records in
17+0 records out
17 bytes transferred in 0.004 secs (4250 bytes/sec)
When I run getvar mid my mid is still 0P6B20000. This is keeping me from flashing the RUU which is looking for the correct mid of PN0731000 and fails with "FAILED (remote: 52 image check fail)".

Does anyone have any idea how I can correct my mid so I can flash this RUU and update my firmware?
 
 
5th September 2014, 04:32 PM |#2  
ckpv5's Avatar
Recognized Contributor
Flag Kuala Lumpur
Thanks Meter: 12,000
 
Donate to Me
More
Quote:
Originally Posted by iAmNotorious

When I run getvar mid my mid is still 0P6B20000. This is keeping me from flashing the RUU which is looking for the correct mid of PN0731000 and fails with "FAILED (remote: 52 image check fail)".

Does anyone have any idea how I can correct my mid so I can flash this RUU and update my firmware?

Are you sure you have the right RUU for M8 ?
AFAIK PN0731000 is for M7
0P6B20000 is M8
5th September 2014, 04:37 PM |#3  
iAmNotorious's Avatar
OP Junior Member
Flag Oklahoma
Thanks Meter: 0
 
More
Quote:
Originally Posted by ckpv5

Are you sure you have the right RUU for M8 ?
AFAIK PN0731000 is for M7
0P6B20000 is M8

Mmm that's it! Should probably not try to stay up all night. The RUU I was looking at was the new M7 RUU.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools
Display Modes