So i was trying to get my at&t htc one back to 100% stock so i could send it in for warranty. I got my replacement htc one, but while in the process of going back to stock something happened the phone wont load into recovery, when it boots into the os it stays at the htc screen but plays the at&t boot animation sound, and to top it off the old phone wont connect properly through usb (the new one will just fine). So i am stuck in bootloader anyone have any ideas?
http://forum.xda-developers.com/show....php?t=2358738 this was the guide *Remove red warning from boot screen + custom hboot: http://forum.xda-developers.com/show....php?t=2316726 thats where things got messed up i pushed the FUU and flashed it thats where things got messed up. the phone is s-off Hboot-1.55.0000 and the os-1.20.401.1(3.10.502.2)
im guessing i screwed up and rushed things i just figured i would post as a last resort and get outside input before i decided if i should send it in as is send the new one back or what lol i appreciate any help.
Before you can proceed with the 2 following threads for removing Tampered and then Locking you need to have Superuser installed. There are links to how to do this in each thread. You can also use this toolkit. Just remember to delete the SuperUser and busybox apk if installed before you return the phone.
2. - First remove the Tampered Flag. Instructions are in this thread
3. - Second Lock the bootloader. Instructions are in this thread
The older REVONE commands/instructions for Tampered and Locking:
Now since you had to install SuperUser to perform the previous 2 steps make sure you unroot by deleting the Superuser.apk and busybox.apk (If installed) from the /system/app folder and also the su binary from /system/xbin on your phone.
If you ran a RUU your systems firmware and software is all reset back to stock. If you restored via Stock ROM reset or Nandroid you should be running the stock software but it could be on non stock (version mismatch) firmware.
In either case your bootloader should display Locked and no Tampered just like out of the box. Now all that’s left is to S-On. To do that issue this fastboot command:
you should check this post before going any further
I don't know what you mean by I pushed the FUU and flashed it. do you mean you flashed firmware?
If you flashed a custom hboot with no red text you will brick the phone when you lock the bootloader.
Don't lock bootloader !!
Use this tool to remove Tampered and set to Locked
at this point just flash the AT&T RUU
and see where your at.
From the Guide you linked
the problem im having is the phone wont connect properly through usb to either of my computers ive tried different ports and different cables
This device cannot start. (Code 10)
A device which does not exist was specified.
thats the error i get in device status but my other htc connects perfect
I repeat this is a REALLY DIRTY solution that may harm your system, personal data, hardware and/or cat.
Here are the steps:
0. Have a Linux or Windows LiveCD just in case something goes wrong
1. Download and extract files from attachment
2. Navigate to the folder corresponding to your system version (x86 = 32-bit, x64 = 64 bit)
3. Right-click franken-usb.bat and click "Run as Administrator"
5. Wait for it to finish and reboot the system. If everything went fine, you will boot your system successfully
6. Install ADB/Fastboot drivers just like on Windows 8
7. Connect your phone in Fastboot mode to your USB 2.0 port and check if it works
8. Enjoy and wait for official fix
How does it work:
It's not any kind of magic - it just replaces Windows 8.1's usbhub.sys and usbport.sys with Windows 8's ones.
Old files don't check for BOS descriptor so Fastboot can work.
Script updated - it should now actually copy the files but please double check if files were copied to C:\Windows\system32\Drivers!
Hope it helps you!
|Thread Tools||Search this Thread|