About Me

  • About JohnnyInBriz
    Home country
    Electronics Engineering


Total Posts
General Information
  • Last Activity: Yesterday 09:40 AM
  • Last Login: 1st January 1970 12:00 AM
  • Join Date: 7th October 2010
  • Referrals: 0

Most Thanked

Thanks Post Summary
7 First of all a very big thanks to yuweng for porting CWM to the Goophone I9. He has posted some tools for porting CWMR/ TWRP Recovery for MT657x. Unfortunately the Goophone I9 is a bit more stubborn than most MT6589 phones but yuweng was k...
3 Hi guys, I have my i9, and for the life of me, I cannot get it to hold signal on at&t. It has it for a few mins, then drops connection. Does anyone have a fix? Take a look at post #22 in this thread. It may help ---------- Post added at 11:55 A...
2 To do a hard reset, power off the phone and wait at least 10 seconds. Press power & vol down at the same time. When LG logo appears release both buttons and after 2 seconds press vol up and vol down at the same time until reset prompt appears
2 Hi Guys I have a problem with my D838 Hongkong version with 16gb RAM I m not able to do a hard reset I try login onto the stock recovery by shutting down and then pressing vol down and power button as mentioned at various places But nothing happen...
2 The speaker on my P8 was becoming intermittent. I found that the flex PCB from the charger board to the speaker contact pads had fractured since the charger board moves quite a lot when un/plugging USB. This pic shows how I repaired it. I used ...