Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,742,650 Members 38,845 Now Online
XDA Developers Android and Mobile Development Forum

[Recovery]CWM 6.0.5.0 [Kitkat Supported][LATEST/UPDATED][RESOLUTION ISSUE SOLVED]

Tip us?
 
digyvijaykumar123
Old
(Last edited by digyvijaykumar123; 7th July 2014 at 08:54 PM.)
#1  
digyvijaykumar123's Avatar
Senior Member - OP
Thanks Meter 1773
Posts: 270
Join Date: Nov 2013
Location: Koderma

 
DONATE TO ME
Default [Recovery]CWM 6.0.5.0 [Kitkat Supported][LATEST/UPDATED][RESOLUTION ISSUE SOLVED]


Code:
Select Code
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

CWM RECOVERY 6.0.5.0 FOR A110Q



REQUIREMENTS:-
[FOR PC]Sp Flash Tool
[FOR MOBILE]Root and MOBILE UNCLE TOOLS APP


BUGS:-TESTED & BUGLESS (IF YOU REPORT A BUG THEN I WILL NEVER BELIEVE YOU)

DOWNLOADS- CWM.6.0.5.0.img

HOW TO INSTALL:-
MOBILE
 
  • Download the recovery.img and Put it in root of your SDCARD
  • Open Mobile uncle tools app and select Recovery Update
  • When prompt select Yes and then again yes to reboot into recovery to check it is working or not.
  • Done



PC
 
  • Install USB drivers for your phone using Micromax drivers or if already installed then OK.
  • Extract the Stock ROM folder and replace recovery.img with cwm recovery which you downloaded from here.
  • Open the SP Flash Tools.
  • In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
  • Check only recovery.img, preloader and uncheck all others
  • Switch off your phone (Remove the battery)
  • In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
  • Click the Download option (present on the right of Firmware>Upgrade option) and the flash tool will start looking for your phone.
  • Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
  • After the process completes, a green ring will appear on your device signalling that the process was successful.
  • Disconnect and reboot or go to recovery to check it.



Kernel Used:-Kash Kernel Stable

CREDITS:-
koushik Dutta FOR HIS CLOCKWORK-MOD RECOVERY.
@chrmhoffmann for compiling.
@kashifmin For his kernel & Support.

MTK STUFF:-KITKAT ROMS:::::::::::::JELLY BEANS:::::::::::::GUIDES:::::::::::::TOOLS&UTILITY:::::::::::::MY X CONCEPT
Devices:-
Current :- Xiaomi Mi3
Previous :- MMx C2+
The Following 22 Users Say Thank You to digyvijaykumar123 For This Useful Post: [ Click to Expand ]
 
digyvijaykumar123
Old
(Last edited by digyvijaykumar123; 7th July 2014 at 08:44 PM.)
#2  
digyvijaykumar123's Avatar
Senior Member - OP
Thanks Meter 1773
Posts: 270
Join Date: Nov 2013
Location: Koderma

 
DONATE TO ME
Default Older version

CWM RECOVERY 6.0.4.4 FOR A110Q


REQUIREMENTS:-
[FOR PC]Sp Flash Tool
[FOR MOBILE]Root and MOBILE UNCLE TOOLS APP


BUGS:-TESTED & BUGLESS (IF YOU REPORT A BUG THEN I WILL NEVER BELIEVE YOU)

DOWNLOADS
With Mmx Theme:-CWM 6.0.4.4
Without Mmx Theme:-CWM 6.0.4.4

HOW TO INSTALL:-
MOBILE
  • Download the recovery.img and Put it in root of your SDCARD
  • Open Mobile uncle tools app and select Recovery Update
  • When prompt select Yes and then again yes to reboot into recovery to check it is working or not.
  • Done


PC
  • Install USB drivers for your phone using Micromax drivers or if already installed then OK.
  • Extract the Stock ROM folder and replace recovery.img with cwm recovery which you downloaded from here.
  • Open the SP Flash Tools.
  • In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
  • Check only recovery.img, preloader and uncheck all others
  • Switch off your phone (Remove the battery)
  • In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
  • Click the Download option (present on the right of Firmware>Upgrade option) and the flash tool will start looking for your phone.
  • Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
  • After the process completes, a green ring will appear on your device signalling that the process was successful.
  • Disconnect and reboot or go to recovery to check it.


Kernel Used:-Kash Kernel Stable

CREDITS:-
koushik Dutta FOR HIS CLOCKWORK-MOD RECOVERY.
@carliv FOR CUSTOMIZING THIS VERSION
@kashifmin For his kernel & Support.

MTK STUFF:-KITKAT ROMS:::::::::::::JELLY BEANS:::::::::::::GUIDES:::::::::::::TOOLS&UTILITY:::::::::::::MY X CONCEPT
Devices:-
Current :- Xiaomi Mi3
Previous :- MMx C2+
The Following 14 Users Say Thank You to digyvijaykumar123 For This Useful Post: [ Click to Expand ]
 
amit@
Old
#3  
amit@'s Avatar
Member
Thanks Meter 20
Posts: 31
Join Date: Jan 2014
Location: patna
Its miracle good work man.waiting for more features in kernel next build

Sent from my A110Q using XDA Premium 4 mobile app
The Following 2 Users Say Thank You to amit@ For This Useful Post: [ Click to Expand ]
 
chrajendranath
Old
#4  
Junior Member
Thanks Meter 1
Posts: 17
Join Date: Dec 2013
great work bro..
 
TypicalAndroidUser
Old
#5  
TypicalAndroidUser's Avatar
Member
Thanks Meter 6
Posts: 44
Join Date: Nov 2013
Thumbs up super!

great work man! will definitely check this out! BTW any idea as to when Kitkat might release for our device?
May the light of Android phone guide your way out of Windows P8 Hell

Currently using:

1. Micromax A110q vanilla Jellybean Rooted. ( 4.2.1 )

2. Micromax A106 vanilla Kitkat Rooted. ( 4.4.2 )

3. Samsung Galaxy Tab P3100 vanilla Jellybean Rooted ( 4.2.x )

4. Nokia Lumia 520 vanilla windows phone 8.1 ( Lumia Black )

VISIT MY YOUTUBE CHANNEL: https://www.youtube.com/user/gamersrijit

VISIT MY BLOG: http://gamersrijit.blogspot.in/
 
digyvijaykumar123
Old
#6  
digyvijaykumar123's Avatar
Senior Member - OP
Thanks Meter 1773
Posts: 270
Join Date: Nov 2013
Location: Koderma

 
DONATE TO ME
Default Update

Recovery Update:

-Version 6.0.5.0 added.
-Latest CWM compiled with CM11 4.4.4 M8

MTK STUFF:-KITKAT ROMS:::::::::::::JELLY BEANS:::::::::::::GUIDES:::::::::::::TOOLS&UTILITY:::::::::::::MY X CONCEPT
Devices:-
Current :- Xiaomi Mi3
Previous :- MMx C2+
The Following 10 Users Say Thank You to digyvijaykumar123 For This Useful Post: [ Click to Expand ]
 
BOPOH'Ok
Old
#7  
BOPOH'Ok's Avatar
Member
Thanks Meter 21
Posts: 36
Join Date: Jul 2013
Location: Kemerovo
Quote:
Originally Posted by digyvijaykumar123 View Post
Recovery Update:

-Version 6.0.5.0 added.
-Latest CWM compiled with CM11 4.4.4 M8
Best work bro, on Fly IQ450Q works fine ... works correctly ...

The Following 2 Users Say Thank You to BOPOH'Ok For This Useful Post: [ Click to Expand ]
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes