Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

[NEW][Recovery]CWM 6.0.5.1[Kitkat Supported][LATEST/UPDATED][RESOLUTION ISSUE SOLVED]

OP digyvijaykumar123

1st May 2014, 10:45 PM   |  #1  
digyvijaykumar123's Avatar
OP Senior Member
Flag Koderma
Thanks Meter: 1,313
 
319 posts
Join Date:Joined: Nov 2013
Donate to Me
More

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

CWM RECOVERY 6.0.5.1 FOR A110Q



REQUIREMENTS:-
[FOR PC]Sp Flash Tool
[FOR MOBILE]Root and MOBILE UNCLE TOOLS APP


BUGS:-TESTED & BUGLESS (IF YOU REPORT A BUG THEN I WILL NEVER BELIEVE YOU)


HOW TO INSTALL:-
MOBILE
  • Download the recovery.img and Put it in root of your SDCARD
  • Open Mobile uncle tools app and select Recovery Update
  • When prompt select Yes and then again yes to reboot into recovery to check it is working or not.
  • Done



PC
  • Install USB drivers for your phone using Micromax drivers or if already installed then OK.
  • Extract the Stock ROM folder and replace recovery.img with cwm recovery which you downloaded from here.
  • Open the SP Flash Tools.
  • In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
  • Check only recovery.img, preloader and uncheck all others
  • Switch off your phone (Remove the battery)
  • In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
  • Click the Download option (present on the right of Firmware>Upgrade option) and the flash tool will start looking for your phone.
  • Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
  • After the process completes, a green ring will appear on your device signalling that the process was successful.
  • Disconnect and reboot or go to recovery to check it.



Kernel Used:-Kash Kernel Stable

CREDITS:-
koushik Dutta FOR HIS CLOCKWORK-MOD RECOVERY.
@chrmhoffmann for compiling.
@kashifmin For his kernel & Support.
Last edited by digyvijaykumar123; 7th October 2014 at 09:30 PM.
The Following 21 Users Say Thank You to digyvijaykumar123 For This Useful Post: [ View ]
1st May 2014, 10:46 PM   |  #2  
digyvijaykumar123's Avatar
OP Senior Member
Flag Koderma
Thanks Meter: 1,313
 
319 posts
Join Date:Joined: Nov 2013
Donate to Me
More
Older version
CWM RECOVERY 6.0.4.4 FOR A110Q


REQUIREMENTS:-
[FOR PC]Sp Flash Tool
[FOR MOBILE]Root and MOBILE UNCLE TOOLS APP


BUGS:-TESTED & BUGLESS (IF YOU REPORT A BUG THEN I WILL NEVER BELIEVE YOU)

DOWNLOADS
With Mmx Theme:-CWM 6.0.4.4
Without Mmx Theme:-CWM 6.0.4.4

HOW TO INSTALL:-
MOBILE
  • Download the recovery.img and Put it in root of your SDCARD
  • Open Mobile uncle tools app and select Recovery Update
  • When prompt select Yes and then again yes to reboot into recovery to check it is working or not.
  • Done


PC
  • Install USB drivers for your phone using Micromax drivers or if already installed then OK.
  • Extract the Stock ROM folder and replace recovery.img with cwm recovery which you downloaded from here.
  • Open the SP Flash Tools.
  • In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
  • Check only recovery.img, preloader and uncheck all others
  • Switch off your phone (Remove the battery)
  • In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
  • Click the Download option (present on the right of Firmware>Upgrade option) and the flash tool will start looking for your phone.
  • Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
  • After the process completes, a green ring will appear on your device signalling that the process was successful.
  • Disconnect and reboot or go to recovery to check it.


Kernel Used:-Kash Kernel Stable

CREDITS:-
koushik Dutta FOR HIS CLOCKWORK-MOD RECOVERY.
@carliv FOR CUSTOMIZING THIS VERSION
@kashifmin For his kernel & Support.
Last edited by digyvijaykumar123; 7th July 2014 at 09:44 PM.
The Following 11 Users Say Thank You to digyvijaykumar123 For This Useful Post: [ View ]
2nd May 2014, 06:41 AM   |  #3  
amit@'s Avatar
Member
Flag patna
Thanks Meter: 61
 
47 posts
Join Date:Joined: Jan 2014
More
Its miracle good work man.waiting for more features in kernel next build

Sent from my A110Q using XDA Premium 4 mobile app
The Following 2 Users Say Thank You to amit@ For This Useful Post: [ View ]
2nd May 2014, 04:19 PM   |  #4  
Junior Member
Thanks Meter: 1
 
18 posts
Join Date:Joined: Dec 2013
great work bro..
3rd May 2014, 04:18 AM   |  #5  
TypicalAndroidUser's Avatar
Member
Thanks Meter: 7
 
44 posts
Join Date:Joined: Nov 2013
More
Thumbs up super!
great work man! will definitely check this out! BTW any idea as to when Kitkat might release for our device?
7th July 2014, 09:53 PM   |  #6  
digyvijaykumar123's Avatar
OP Senior Member
Flag Koderma
Thanks Meter: 1,313
 
319 posts
Join Date:Joined: Nov 2013
Donate to Me
More
Update
Recovery Update:

-Version 6.0.5.0 added.
-Latest CWM compiled with CM11 4.4.4 M8
The Following 7 Users Say Thank You to digyvijaykumar123 For This Useful Post: [ View ]
9th July 2014, 08:59 AM   |  #7  
BOPOH'Ok's Avatar
Member
Flag Kemerovo
Thanks Meter: 20
 
51 posts
Join Date:Joined: Jul 2013
More
Thumbs up
Quote:
Originally Posted by digyvijaykumar123

Recovery Update:

-Version 6.0.5.0 added.
-Latest CWM compiled with CM11 4.4.4 M8

Best work bro, on Fly IQ450Q works fine ... works correctly ...
The Following 2 Users Say Thank You to BOPOH'Ok For This Useful Post: [ View ]
7th October 2014, 09:32 PM   |  #8  
digyvijaykumar123's Avatar
OP Senior Member
Flag Koderma
Thanks Meter: 1,313
 
319 posts
Join Date:Joined: Nov 2013
Donate to Me
More
UPDATE

NEW 6.0.5.1 Version Added!!
Changelog:
-Sync with CM latest Source.
-configured to install via CMUPDATER

Regards-

The Following 3 Users Say Thank You to digyvijaykumar123 For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes