FORUMS
Post Reply Subscribe to Thread Email Thread

GPE to stock, firmware image

14th March 2015, 07:27 AM |#1  
OP Member
Thanks Meter: 2
 
More
Hi, i've been reading a lot of posts explaining how to do "GPE LP to KK", and other things, but i want to know if i can flash the BR 5.0.2 firmware image directly above my 5.0.1 GPE without any problems. Thanks in advance
 
 
14th March 2015, 01:53 PM |#2  
audit13's Avatar
Senior Member
Flag Toronto
Thanks Meter: 1,850
 
More
If you manually flash the stock BR 5.02 to each partition using fastboot commands, you should be fine. Every file will flash except for the motoboot file. I say this because I was able to flash stock Telus 4.4.4 on an xt1032 that I converted to the GPE edition.
14th March 2015, 08:00 PM |#3  
OP Member
Thanks Meter: 2
 
More
So doesn't matter if motoboot refuse to flash, because GPE and Stock LP have the same included, right?
14th March 2015, 09:27 PM |#4  
audit13's Avatar
Senior Member
Flag Toronto
Thanks Meter: 1,850
 
More
For me, stock 4.4.4 and stock 5.02 both worked on my xt1032 with bootloader 41.18.

Even if you tried to flash an older bootloader, it would fail the validation check.
16th March 2015, 07:59 AM |#5  
OP Member
Thanks Meter: 2
 
More
Ok finally i managed to downgrade to EU retail 4.4.4 and then OTA to 5.0.2. All the process was great. Thank you for your help [emoji4]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes