FORUMS

Swappa’s New App Helps You Value Your Device

There comes a sad time in everyone’s life where you must part ways with your … more

Xiaomi Sold 34.7 Million Phones In 6 Months

2015 has been a phenomenal year for Xiaomi so far. With a stellar rise in 2014, 2015 saw … more

Sprint Reacts To Jab From T-Mobile

America’s cellular network space has always been a battle of the big four: Verizon, AT&T, … more

Floating Apps with Rovers – XDA App Review

There are a lot of great launchers to help customize your phone. Some Launchers allow … more

[Help] Moto G 4G peregrine issues

14 posts
Thanks Meter: 0
 
By Ferguson35000, Junior Member on 1st September 2014, 03:09 PM
Post Reply Subscribe to Thread Email Thread
18th September 2014, 01:54 PM |#11  
OP Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by hacktrix2006

Have you tried going back to a stock 4.4.4 if you have ota'd to 4.4.4 you need 4.4.4 stock image.

Hello, I have bought the phone less than one month ago.

It was directly on 4.4.4 after unpacking.

Quote:

Have you tried renaming the CWM file? Maybe the "-" are a problem although I highly doubt it. Did you try re downloading the file? Running the command window as an administrator? Last resort, you could use TWRP, I'm running on this currently and haven't had any problems installing/flashing ROMs with it and imo prefer it over CWM.


I have tried both and they both have the same problem :/ CWM as well as TWRP...

Still no idea what happens.
Last edited by Ferguson35000; 18th September 2014 at 02:03 PM.
 
 
27th October 2014, 09:26 PM |#12  
Junior Member
Thanks Meter: 0
 
More
Prompt same problem
I got the same problem using mac..
Impossible to install cwm or twrp also.. i cannot enter in the recovery mode any more
the boot loader is unlocked. I don't know whats going on
30th October 2014, 10:12 AM |#13  
OP Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by kosamuky

I got the same problem using mac..
Impossible to install cwm or twrp also.. i cannot enter in the recovery mode any more
the boot loader is unlocked. I don't know whats going on

Did you find any solutions for this ?

I'm still stuck

Is it normal when entering the bootloader to have the message :

"Device is UNLOCKED. Status code: 3 "

Is it the right status code ?

Thank you
30th October 2014, 04:02 PM |#14  
Junior Member
Thanks Meter: 1
 
More
Back to stock
Quote:
Originally Posted by Ferguson35000

Did you find any solutions for this ?

I'm still stuck

Is it normal when entering the bootloader to have the message :

"Device is UNLOCKED. Status code: 3 "

Is it the right status code ?

Thank you


Yes its normal if you have unlocked your bootloader

To get back to stock, download a stock Fw for your device model and region, you can find a link for one if you enter the moto g section of this site and head to moto 4g lte android development section (only section specifically for peregrine model) unpack the fw files into your fastboot directory (windows) reboot your phone to fastboot mode (where u saw the status code) then press control + shift + right click to launch a command prompt window here (from within fastboot directory in windows) then copy and paste these fastboot commands 1 by 1 pressing enter each time until compete.

mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Last edited by bennythedip; 30th October 2014 at 04:10 PM.
30th October 2014, 05:14 PM |#15  
OP Junior Member
Thanks Meter: 0
 
More
So you mean, it is compulsory to have stock ROM in order to install the recovery ?

Because my problem is not to return to stock, it is to install a proper recovery (CWM or TWRP) in order to boot on it without my computer.

Thanks for your help
31st October 2014, 01:33 PM |#16  
Junior Member
Thanks Meter: 1
 
More
No but I think your problem is you have corrupt the recovery partition size maybe through bad flash or something so ur unable now to flash a recovery as the partition size is for different device or damaged and flashing cwm will no longer work as the cwm image is too big or too small for the allocation assigned to it as the devices core partition table has changed (can happen when u flash something for the falcon when you have a peregrine), I would flash back to stock via that method to restore to stock partition sizes and then reroot and flash cwm again after, just a guess from my own understanding.

Sent from my XT1039 using XDA Free mobile app
Last edited by bennythedip; 31st October 2014 at 01:38 PM.
The Following User Says Thank You to bennythedip For This Useful Post: [ View ]
12th November 2014, 04:55 PM |#17  
Junior Member
Thanks Meter: 2
 
More
Guys I had the same trouble installing the recovery with the mismatched partition size message. This message is normal and the recovery is already installed on your device. The problem i had when selecting the recovery with the following black screen was that I used the Power Button instead of the up Button.

5) using volume down scroll to recovery and then use volume up to select
The Following 2 Users Say Thank You to cd492 For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes