FORUMS

Return Boost Moto G flashed to Page Plus back to Boost Mobile

111 posts
Thanks Meter: 6
 
By bamx2, Senior Member on 30th August 2014, 12:41 PM
Post Reply Subscribe to Thread Email Thread
I am giving one of my flashed phones that I was using on Page Plus Cellular (Boost Moto G XT1031) to a friend who wants to use it on Boost Mobile . The phone was flashed using using the procedure here- http://forum.xda-developers.com/show....php?t=2681166. The phone has the unlocked bootloader and is running stock VZ 4.4.4. I know that I have to change the SPC back to original (I saved it ) Can I simply flash it back from VZW 4.4.4 to one of the available earlier stock Boost stock roms 4.4.2, 4.4.3 (don't want to brick it) ?. Any help in making this phone useable on Boost Mobile is appreciated -Thanks.
Last edited by bamx2; 14th September 2014 at 02:28 PM.
 
 
30th August 2014, 05:15 PM |#2  
CodyF86's Avatar
Senior Member
Flag Indianapolis
Thanks Meter: 3,725
 
Donate to Me
More
You should just be able to change the SPL back to what it was originally and flash the factory firmware and be good to go. Do the factory activation after you flash *228 or whatever it is.

There was a filesystem change between 4.3 and 4.4.2 but if you are just flash 4.4 you should be fine. Just make sure to follow the appropriate flashing guide.

http://forum.xda-developers.com/show....php?t=2542219

If there were any other specific changes you had to make when changing to Page Plus in CDMA workshop you may have to revert those, but I don't think there really was.
13th September 2014, 11:21 PM |#3  
OP Senior Member
Thanks Meter: 6
 
More
OK. - I will give it try when the Boost Mobile XT1031 Moto G 4.4.4 ROM ( 4.4.4 Blur_Version.175.44.1.falcon_cdma.Boost.en.US) image shows up at one of the hosting sites mentioned in this thread - http://forum.xda-developers.com/show....php?t=2546251



Quote:
Originally Posted by CodyF86

You should just be able to change the SPL back to what it was originally and flash the factory firmware and be good to go. Do the factory activation after you flash *228 or whatever it is.

There was a filesystem change between 4.3 and 4.4.2 but if you are just flash 4.4 you should be fine. Just make sure to follow the appropriate flashing guide.

http://forum.xda-developers.com/show....php?t=2542219

If there were any other specific changes you had to make when changing to Page Plus in CDMA workshop you may have to revert those, but I don't think there really was.

Last edited by bamx2; 13th September 2014 at 11:52 PM.
14th September 2014, 02:56 AM |#4  
gpz1100's Avatar
Senior Member
Thanks Meter: 296
 
More
4.4.4 makes changes to the trustedzone. You will not be able to downgrade. You'll need to wait until boost 4.4.4 firmware is released.
26th September 2014, 04:05 AM |#5  
OP Senior Member
Thanks Meter: 6
 
More
Tthe stock Xt1031 Boost Moto G 4.4.4 rom is now available - http://forum.xda-developers.com/show...&postcount=408, A quick run through of the procedures for flashing and any other changes (via DFS) to make the phone so that is can become activated on Bost Mobile is appreciated. - Thanks


Quote:
Originally Posted by gpz1100

4.4.4 makes changes to the trustedzone. You will not be able to downgrade. You'll need to wait until boost 4.4.4 firmware is released.

Last edited by bamx2; 26th September 2014 at 04:08 AM.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes