[M][6.0] Frank N4 - CAF based soon - [waiting]

Search This thread
By:
Advanced…
sykopompos

sykopompos

Recognized Developer
Jun 26, 2008
15,322
29,134
flithydelphia
Alright, it is 5:40 in the morning and I just got home from a 11 hour night work night so no work this morning. I'm ready to pass out.
Beta 5 will be mostly testing builds merging back in current aosp bits so if you are looking for stable, you might wanna stay on 4.2.7 for the weekend while we merge back into a current base, lots of fun testing gets to be had

Sent from my Nexus 4
 
  • Like
Reactions: TheNerd:]
xda_emanuel

xda_emanuel

Senior Member
Mar 23, 2012
437
133
sykopompos said:
I keep forgetting to do that, hopefully @defconoi will because I keep getting caught up trying different things and it just slips my mind.


Sent from my Nexus 4
Click to expand...
Click to collapse
Man the qcom_rx_wakelock is also caused by buggy wifi drivers? I still do not figured out about it, its draining alot my battery.

Edit: Could someone confirm if you have also this wakelock? so i can figured out if its just my phone
 
sykopompos

sykopompos

Recognized Developer
Jun 26, 2008
15,322
29,134
flithydelphia
xda_emanuel said:
Man the qcom_rx_wakelock is also caused by buggy wifi drivers? I still do not figured out about it, its draining alot my battery.
Click to expand...
Click to collapse

If it just popped in the 4.2 series then it is a new proprietary buggy that should be handled when we start merging back into aosp. We are starting to get too far ahead of the preview image so I expected a bit of buggy behavior with some of the new binaries since they are made for code way newer than ours at this point

Sent from my Nexus 4
 
  • Like
Reactions: TheNerd:] and xda_emanuel
xda_emanuel

xda_emanuel

Senior Member
Mar 23, 2012
437
133
Thanks for the quick answer , i will be glad also if somebody can confirm this behavior so i can format everything and do a clean flash if this problem could be caused by a dirty flash or i dont know
 
spirosun

spirosun

Senior Member
Aug 10, 2012
99
16
Warsaw
sykopompos said:
Alright, it is 5:40 in the morning and I just got home from a 11 hour night work night so no work this morning. I'm ready to pass out.
Beta 5 will be mostly testing builds merging back in current aosp bits so if you are looking for stable, you might wanna stay on 4.2.7 for the weekend while we merge back into a current base, lots of fun testing gets to be had

Sent from my Nexus 4
Click to expand...
Click to collapse

WHen do you want to share 5.0:)?
 
manulemaboul

manulemaboul

Senior Member
Feb 24, 2012
1,907
1,050
defconoi said:
I got no random reboots with kernel 20, if anyone can provide logcat/last_kmsg that would be great, i've unplugged usb about 20 times did reboots, played games, messed with settings, no problems yet
Click to expand...
Click to collapse
I've provided one, stock settings, no UV, rebooted while typing on Xda like 1min after the boot.

Here it is: https://dl.dropboxusercontent.com/u/71255978/last_kmsg(1)

It reboot way way less when the USB is plugged, I had a hard time to logcat yesterday, but reboot almost instantly when I unplugged it.
It reboots systematically 1min after the boot is completed since I've cleared synapse's data.
 
Last edited:
ruicc

ruicc

Senior Member
Jan 8, 2008
1,763
615
GB
meettomy.site
manulemaboul said:
I've provided one, stock settings, no UV, rebooted while typing on Xda like 1min after the boot.

Here it is: https://dl.dropboxusercontent.com/u/71255978/last_kmsg(1)

It reboot way way less when the USB is plugged, I had a hard time to logcat yesterday, but reboot almost instantly when I unplugged it.
It reboots systematically 1min after the boot is completed since I've cleared synapse's data.
Click to expand...
Click to collapse

Same problem here, had to flash hellscore kernel, and the problem is gone. It was always rebooting, minute after minute, initially it was plugged on my USB PC's port, but after i disconnected it, reboots continued.
I was on kernel 18, maybe i'll try kernel 20 today, and see if it's ok.
 
manulemaboul

manulemaboul

Senior Member
Feb 24, 2012
1,907
1,050
It'll be the same, my tests were on 20. I think it started to do it on 17, maybe 16, and keep doing it since.
 
ruicc

ruicc

Senior Member
Jan 8, 2008
1,763
615
GB
meettomy.site
​
manulemaboul said:
It'll be the same, my tests were on 20. I think it started to do it on 17, maybe 16, and keep doing it since.
Click to expand...
Click to collapse

Try flash hellscore_b47_anykernel (not CM) with HCM (hells core manager) and see if the reboots remains.

Personally, i had some problems in the past with HC, the screen freezes times to times and get completely unresponsiveness...the 10 fingers trick doesn't worked.

Only way, was to turn off and on. But until now, don't have that issue.
 
Last edited:
W

WizardBGR

Senior Member
Feb 15, 2011
184
21
49
Sofia
artportal-bg.info
Anyone noticed the lack of 3G mobile Internet on 4.2.7? WiFi works just fine but switching to mobile data causes "No connection" errors...

Edit: actually it HAS some connection - FB works fine, but browser goes like this:
metupy2a.jpg

Edit 2: Confirmed - it was kernel issue. Flashed hellscore b47 - all works, all pages open in Chrome, no more Error 500.
 
Last edited:
ph37rd

ph37rd

Senior Member
Oct 6, 2012
1,072
634
59
ruicc said:
Same problem here, had to flash hellscore kernel, and the problem is gone. It was always rebooting, minute after minute, initially it was plugged on my USB PC's port, but after i disconnected it, reboots continued.
I was on kernel 18, maybe i'll try kernel 20 today, and see if it's ok.
Click to expand...
Click to collapse
I don't recall if I was plugged in or not, but yesterday after doing the factory reset and flashing 4.2.7 with 17 then 18 I had the consistent reboots you talk about. I flashed hellscore then booted, no reboots. Went back to 18 and have been on that since without problem.

Question, wouldn't that typically indicate a ramdisk problem?
 
manulemaboul

manulemaboul

Senior Member
Feb 24, 2012
1,907
1,050
ruicc said:
​

Try flash hellscore_b47_anykernel (not CM) with HCM (hells core manager) and see if the reboots remains.

Personally, i had some problems in the past with HC, the screen freezes times to times and get completely unresponsiveness...the 10 fingers trick doesn't worked.

Only way, was to turn off and on. But until now, don't have that issue.
Click to expand...
Click to collapse
Tried it already, no reboots, it only does it on defconoi's since a few releases.
It's not synapse or UKM either, works fine with AK.
 
P

PugRallye

Senior Member
Mar 3, 2012
379
94
Out of interest, what screenshot apps are people recommending?

I miss having the screenshot option on the power menu (as with previous ROMs, notably Purity).

What's the best (i.e. simplest) solution for this ROM?

Thanks
 
ph37rd

ph37rd

Senior Member
Oct 6, 2012
1,072
634
59
PugRallye said:
Out of interest, what screenshot apps are people recommending?

I miss having the screenshot option on the power menu (as with previous ROMs, notably Purity).

What's the best (i.e. simplest) solution for this ROM?

Thanks
Click to expand...
Click to collapse
Simultaneously hold down power and volume down.

Hmmm better than four out of five dentists and their tooth brushes
 
You must log in or register to reply here.

Similar threads

andersonaragao
  • Locked
  • Poll
[ROM+KERNEL][CM11][KTU84Q][CAF&AOSP] Nexus 5 Experience - CM11 Based [R10.3 - 23Oct]
Replies
6K
Views
1M
Toledo_JAB
Toledo_JAB
Z
[ROM][N4][6.0.1_r62][MTC20F] Chroma 08/02/2016
Replies
7K
Views
1M
T
TundraLK520
G
[ROM][N4][NMF26O] Fake nexus rom for Nexus 4. [Dec/06/2016]
Replies
2K
Views
440K
kurtschmeichel
kurtschmeichel
vocoderism
[ROM] 6.0 Android Marshmallow Pure AOSP
Replies
812
Views
399K
zogthegreat
zogthegreat
atl4ntis
  • Locked
[ROM][MAKO][KitKat/Lollipop/Marshmallow]Cataclysm for Nexus 4[Dec 21, 2015]
Replies
5K
Views
923K
Neo
Neo

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 1139
    sykopompos
    sykopompos
    Beware of googleys


    FRANK

    1. Device tree is patched mako 5.1.1 with flo's M source
    2. Layers
    3. Day/Night theme switcher from first M preview
    4. Init.d support
    5. Advanced reboot
    6. SuperSu 2.52 flashed with the rom
    7. Volume rocker wake
    8. Volume rocker cursor control
    9. Long press quick settings control
    10. Stock Like feel, please don't ask for features

    Installation

    Roms can change from update to update that sometimes you can dirty flash but if you have errors that other users don't then you will have to clean flash

    First Time Installation:
    1. Download the ROM and Other Optional files below.
    2. Connect your Nexus 4 to the PC and transfer all the zips to the root of your device’s storage.
    3. Reboot into recovery mode (Shut down, press VolDown + Power buttons. In bootloader mode, select Recovery mode)
    4. Wipe the following partitions: System, Data and Cache
    5. Install the ROM zip file
    6. Let it boot. Setup now and wait for the ROM to settle.
    7. Reboot into Recovery again and Install the remaining zip files.
    Updating from previous version:
    1.Download the ROM and Other Optional files below.
    2.Connect your Nexus 4 to the PC and transfer all the zips to the root of your device’s storage.
    3.Reboot into recovery mode (Shut down, press VolDown + Power buttons. In bootloader mode, select Recovery mode)
    4.Wipe the following partitions: Dalvik-cache and Cache
    5.Install the ROM zip file
    6.Reboot now
    7.Let it boot. Setup now and wait for the ROM to settle.
    8.Reboot into Recovery again and Install the remaining zip files.
    9.If have issues with dirty flash, reboot and redo steps wiping DATA also
    Sources
    Changelog

    Code: 
    10-19 adreno update
new adreno libs duh

10-19
Minor update

enable systemui tuner by default
add scanning menu into location
speed up recent app back

10-15-15
Minor update

added aldy's kernel in and turned back on usb-otg in fstab
added minkin text layout engine in thanks to @ckret for pointing it out

10-14-15

bug fixes!!!
some changes on the device tree so anyone using it should update
can build with clang now thanks to @ckret for pointing out the fixes (we are still gcc compiled)
Fixed downloads dark theme thanks to Branden M
Fixed supersu and layers icons being off on the dark theme, thanls Branden again
ambient display color layers inversion fix up ported from lollipop
Fix annoying usb mounting to computer (Thanks to snak3ater pointing this out to zephik)


10-13-15 update-1

added volume rocker wake (in settings/display to turn on)
add volume rocker cursor control
added animation transition animations of .25 and .75
set default animation speeds to .75
added long press recent button switches to the last app
removed the spinner from optimizing apps dialogue so it is quicker at dexopting
added long press on quick settings tile takes you to their settings menu
minor sepolicy fixes
disabled the after flash image verification (was breaking multirom flashing)


10-13 build

Fixed mac address bug thanks to this pull request 
https://github.com/marshmako/device_lge_mako/commit/49b11281e25e434d7f56c4677e663e8dff87ccad
Fix a bad copy pasta of the init usb midi support 

12-12

Added ambient display and full rotation
removed some debugging code
sped up a few things

Frank 10-12-15 with theme switcher, update 1

added google exchange services included in the build, it replaces exchange2
should be able to remove the layers manager icon from the launcher now
removed cell broadcast receiver
added the locked update receiver commit
beanstown found a line to set doze power saving mode that was set to off in aosp so turn it on

https://www.androidfilehost.com/?fid=24052804347836304

10-12 theme switcher update

added day/night theme switcher back to dev settings like what was in M dev preview 1 (only does settings, bluetooth and package installer so we will have to expand on this for layers), will prob move the switch out to the dashboard below layers or some place later.

added https://github.com/BenzoRom/framewor...54a3aa73367bde which should give core google apps default permissions out the box (you might still have setup wizard bug though)

Your current layers themes will only work properly in light mode

new in 10-11-2015
Removed art optimize everything till we have fully deodexed gapps
advanced reboot
init.d support
supersu and layer manager embedded in setting (you need layers manager of course) (forgot to add the hide icon part )
too tired for the rest so just read the commit history if you wanna know more https://github.com/marshmako/platfor...b5b1c3bc4419da https://github.com/marshmako/platfor...6896b4d256a871 pretty much just kanged a bunch of commits from zephik there.

new in update 1.

fixed init.d, removed aosp clock and aosp mms apps. Use updated and better google versions
added missing files for miracast


    Downloads


    gapps without setup wizard if you get wizard fc upon boot thanks to barome (modifed version without setup wizard of above)
    just access play store to be able to log in with your google account
    http://renderserver.net/?dl=6455ad109b871809d8f34b25a92f6904


    For those interested in the commits for the theme switcher
    https://github.com/marshmako/platfo...mmit/da669b1ebda7ee8ac7a39d181eb944290ce9ea72
    https://github.com/marshmako/platfo...mmit/00b529c60d31e554b9c090c03f02ce06a652135a
    https://github.com/marshmako/platfo...mmit/3c683a0124129bda309615a281fc3feb3ec58fde
    https://github.com/marshmako/platfo...mmit/22c13d6bfd5dee4843a6fdca953350d7f56b7066
    https://github.com/marshmako/platfo...mmit/4f298e8f8ab2c08f0e8c4ae92da72b01e0db6b5d
    https://github.com/marshmako/platfo...mmit/4136e2ff29a84be80f8bf7f83a357fb0342e6718
    Click to expand...
    Click to collapse

    Current layers themes will only work on light themes until adapted

    OT talk is welcomed in my threads and development is done in the open. I encourage involvement in the project in any way.
    Please do not complain about OT, it encourages a fun and relaxed environment

    Like the work I did, consider donating. I'm currently not working so it helps feed me

    https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BPFLE54YPRV92
    Yes, my PayPal account is thatguy32404, I like to keep my banking stuff separated from my social account

    XDA:DevDB Information
    [L][5.0] Frank N4 - Aosp builds in testing [1-11-2015], ROM for the Google Nexus 4

    Contributors
    sykopompos, bgill55
    Source Code: https://github.com/marshmako

    ROM OS Version: 6.0.x Marshmallow
    Based On: Aosp

    Version Information
    Status: Stable
    Current Stable Version: 13

    Created 2015-02-27
    Last Updated 2015-02-28
    View
    314
    sykopompos
    sykopompos
    Gapps are not working, help
    Google apps are really goofy this early in MM
    Deep sleep issues are caused by this
    Check runtime permissions on google apps in settings/apps and check the three dot menu for system apps

    SMS/MMS not working?
    SMS & MMS is related to your APN and not the ROM. Check that.

    Can I flash this over my 5.1..x rom?
    Yes, but do a clean install

    OMG x app is not working?
    That's expected - a lot of apps need to be updated to be compatible with L

    OMG xPosed is not working?
    Do not use lollipop Xposed on Marshmallow
    [/Quote]
    grabbed this from @vomer 's preview thread
    [/HIDE]

    nexus devices threads

    ramjet73 said:
    My 5Ghz WiFi works fine.

    For those people having issues with 5Ghz trying changing your channel to one of those listed in this post:

    I'm currently using 44 which seems to be the sweet spot if that's available where you live.

    Nexus 4 aren't able to see DFS channels due to the country regulations on transmissions. But some routers were using those channels when you set it to auto, so try changing your 5Ghz router channel to non-DFS channel like 40 or 48.
    Non-DFS channels: 36, 40, 44, 48, 149, 153, 157, 161, 165

    ramjet73
    Click to expand...
    Click to collapse
    View
    241
    defconoi
    defconoi
    This is bleeding edge and may result in breakage, flash at your own risk.
    Scroll down for updates, read everything.

    This Kernel Takes the Best of Hellscore, Hellsdr, furnace, inception, mirage and Faux Kernel's for the ultimate performance on android L, this kernel is also compatible with Kitkat 4.4.4.

    For all the features, use Synapse, and you must install UKM to see all the settings.

    Grab UKM here
    Grab Synapse here
    Flash Busybox to enable /system/etc/init.d grab a flashable zip here

    Faux Clock, Kernel Tweaker and other apps work, Synapse will show the most options

    Older Kernels:

    Features:
    • Intellidemand
    • Intelliactive
    • Intelli-Thermal
    • Intelli-Plug
    • Undervolting
    • FIOPS & ROW i/o Schedulers
    • Gamma Controls
    • Faux Sound
    • CM Gamma Controls
    • Double Tap to Wake
    • Init.d Support
    • Compiled with Linaro toolchain for speed

    Only for Beta 4, flash in recovery
    http://www.mediafire.com/download/he0fr6jl1liqehi/L-Kernel-Mako-Beta4.zip

    New Kernel Beta 5 uploaded:
    https://mega.co.nz/#!ikg11B5T!q71jC4pQL5sYK-rIVMn6dPHYiAOUq4sAMuN4zz4JWmY

    New Features: Faux Sound, CM Gamma Control Interface

    Beta 6: Internal Release to debug dt2w

    Beta 7 Released with Double Tap 2 Wake:
    https://mega.co.nz/#!jlwjQQSL!2Qh2_hSrw0nGdxZmo9hWTtCkkqsfCB_091gkw2nPixA
    http://www.mediafire.com/download/5856max427q9t59/L-Kernel-Mako-Beta7.zip

    Beta 8 Released with Faux Speaker:
    http://www.mediafire.com/download/0j52si5500d3a7w/L-Kernel-Mako-Beta8.zip

    L-Kernel Beta 9 Uploaded
    http://www.mediafire.com/download/bv1fnffm66cwfg1/L-Kernel-Mako-Beta9.zip

    *warning* if your CPU cannot handle -100 undervolt flash beta 8, I'll be reverting this change when I'm back home on Sunday.

    Changes:
    Lower 81Mhz CPU freq, and lowered voltages to -100mv by default and reduced CPU steps, you guys must reset Synapse, and redo your voltages. This should increase battery even further.

    Beta 10:
    Added kexec hardboot, UV -100 still default.

    https://mega.co.nz/#!29gVBKaT!uYpRdT5_hGtPUEehSM2pLLc4gtN97J6LA5cjfiS1qeA


    New Ultra Kernel Build is up:

    New Features:
    • Ultra Kernel Same Page Merging
    • Customized Lower backlight LUT for power Saving
    • Enabled TCP_westwood, vegas, veno, and cubic, set Westwood as default.
    • Added CK Patches for Speed and battery.
    • Added simple GPU Governor
    • Enabled 450Mhz GPU Overclock
    • Removed Undervolt -100 by default by request.
    • Now has default Faux CPU Voltage Table
    • Overclocked to 1.84Ghz

    Notes:
    You must reset Synape App data or Reinstall after reboot, also voltages will need to be adjusted.

    You'll Need UKM, grab it Here

    You'll Need Synapse, grab it Here

    Kernel 15u:
    https://mega.co.nz/#!zxAVyLiS!pkk1LycxUgNFs2sd31cM5FYhHW4Pf4M8lx1x1t3TRGA

    Kernel 16u Fixes wifi:
    https://mega.co.nz/#!SkAXVZIL!HFce8qB2k11MdjsQe5pgZBdS2MlIZhEed-TQKLFuNSk

    New Kernel Build 18
    https://mega.co.nz/#!e0pzgLYZ!L-L7YCB0Eia4oCtv16ZyQAMqVeKtIsQWbkC3LKUXtig

    • Fixed Wifi
    • Max Clock set to 1.5Ghz
    • Underclocked down to 94mhz

    For those that like the OC, stick with 16u, with this you should get better battery life and great performance.

    You need busybox installed for init.d support.

    Synapse does not remount the system rw before setting an init.d script in WAKE, so first go to terminal or ADB Shell and type:
    mount -o rw,remount /dev/block/platform/msm_sdcc.1/by-name/system /system then open Synapse and click Set Init.d script with sweep to wake.

    In /etc/init.d/ you should now have a file named UKM_WAKE:
    Code: 
    #!/system/bin/sh

#This file was generated automaticaly from Synapse/UKM.
#It contains wake options to be applied from init.d script.

echo 1 > /sys/devices/virtual/input/lge_touch/dt_wake_enabled

    New Ulltimate Kernel Series Features:
    • Compiled with Linaro 4.7.4
    • New 3.4.99 Kernel
    • LZ4 Compression
    • Min Freq: 94500
    • Max Freq: 1512000
    • TCP: HTCP/HSTCP/HYBLA/VEGAS/SCALABLE/LP/VENO/YEAH/ILLINOIS/WESTWOOD(default)
    • FS: exFAT/F2FS
    • IO: ROW/BFQ/SIO/FIOPS/ZEN/VR/NOOP/CFQ/DEADLINE(default) / (default readahead - 512)
    • GOV: intellidemand/intelliactive/ondemandplus/wheatley/ondemand(default)/userspace/powersave/performance/interactive/SmartMax/Stockdemand
    • HotPlug: MPDecision/IntelliPlug(default)
    • Voltage Control
    • TouchWake
    • Semaphore DoubleTap2Wake
    • Bidirectional Sweep2Sleep
    • Sweep2Dim
    • Gamma Control
    • Battery Life eXtender
    • Force Fast Charge
    • FSync system call control
    • Faux123's Sound Control
    • FRandom
    • VFP Hardfloat
    • CPU-Boost via sysfs
    • Linaro's Power-Efficient Workqueue
    • Intelli-Thermal
    • Intelli-Battery
    • Ultra Kernel Same Page Merging
    • OTG
    • Fixed Wifi & More stuff I forgot lol

    Older Ultimate Kernel Series Kernels: (depreciated) use Ultimate 2
    Kernel 23u
    https://mega.co.nz/#!a9RBlYqB!FPp1Cm...LGq8v_t_LGSS8M

    Kernel 24u:
    Added Simple GPU Governor & GPU Overclocking to 450
    Added missed PowerHal lib so Input_boost works with intellidemand, intelliactive & intelli_plug
    Added missed USB Host permissions file
    https://mega.co.nz/#!zkxylbTB!XAsd-7SLaks2ho2sXxa1pS90u7HAgOxO5hehcF9uVeA

    Kernel 25u:
    Fixed Faux Speaker Amp controls
    Misc Lowmemory Killer tweaks
    https://mega.co.nz/#!m9AiWA6K!UPI5E0rlNJ0lwng7Azs7_zPpjUbvgl2HENdW4wwhC5o

    Kernel 26u:
    Fixed power.msm8960.so permission for boostpulse
    http://www.mediafire.com/download/89n59fcqey8n3s9/defcon-26u-Preview_mako.zip


    New Ultimate Series 2 Kernel: Based off of inception, hellsdr, furnace, ak, faux, codeaurora forum upstream code.
    • Updated to Kernel 3.4.101
    • Underclock down to 81mhz
    • overclock to 1.94Ghz
    • Fixed Prima drivers
    • completely removed MP_Decision and old hotplug code
    • MSM_hotplug improvements
    • Added lots of CPU Governors
    • Absolutely a ton of updates.
    • Updated LZO Compression to current upstream version
    • Brought Back Faux Gamma/Display Colors by request.
    • added Slimrom Governor with optimizations
    • Lots of misc optimizations
    • Updated Linao
    • Optimized Intelliactive
    • Updated oom killer to support for_each_thread
    • Updated lowmemorykiller
    • Thermal Improvements
    • Futex Optimizations
    • Entropy Tweaks
    • Add & enable MSM_SHAREDMEM
    • Backported 3.16 scheduler updates to reduce IPI storm
    • Optimized Ondemand
    • TCP optimizations
    • AES Crypto Speed boost & Optimizations
    • Fixed HDR Camera crashes
    • Fixed some security issues in previous kernels
    • Added Network Speed Tweaks
    • Disable Prima debug crap code
    • Lots of bug fixes and so much more that I forgot to mention, be sure to follow my github for a more in-depth changelog here
    • Added AutoSmp Hotplug by @mrg666
    • Added msm_hotplug by MyFluxi
    • Added Latest Intelli-Plug by @faux123
    • AutoSMP hotplug to default starting at 34u
    • Added Faux zRam & Latest Optimizations
    • Updated Kexec Hardboot Patch
    • Updated Faux Sound Control
    • Updated Intelli-plug to 3.8
    • Updated SLUB memory optimizations
    • Updated frontswap, zcache, zmalloc
    • Tons of old code removed like PMEM and Drivers that are not necessary
    • Added Motorola Memutils
    • ion Updates
    • ext4 speedups & tweaks
    • cpufreq updates
    • acpuclock updates
    • Implemented Codel packet scheduler
    • tcp autocorking & tcp small queues
    • Brought back faux color instead of franco's by request
    • Intelli-Active and Intellidemand Latest updates
    • Mass Memory optimizations
    • Mass Futex Optimizations
    • LCD Linear & Exponential Settings added
    • Slim Governor Added
    • mpdecision removed
    • Updated Crypto
    • Crypto Optimizations for encrypted tunnels
    • Network Performance tweaks
    • Added userspace io adjustments
    • Added Ultra Kernel Same Page Merging, because it kicks KSM's ass
    • Intelli-Thermal set on boot
    • KGSL updates

    Older Ultimate 2 Kernels:
    Download:
    http://www.mediafire.com/download/mxqgh4yl1nx77ok/defcon-31u-L-Preview_mako.zip

    Test this thouroughtly, be sure to clear synapse before install, update your voltages

    New Ultimate 2 Series Kernel 34u:
    Download:
    https://mega.co.nz/#!C5BC3YZY!ySNsZ6wZWn0mk5OwOO-iZWpmX6FDgsq7YhAbA8rAQSg
    http://www.mediafire.com/download/1rb617jyx7in2yd/defcon-34u-L-Preview_mako.zip

    Autosmp as default hotplug:
    https://mega.co.nz/#!KowEQIDJ!XkvTAR_I7UVNd6EdzOwCCm7bz16slKoyTvHg1WbZjOk
    Note: clear synapse and uncheck all governors to use autosmp ;)
    To disable autosmp for other hotplugs use an init.d script because enabling an other hotplug will not disable autosmp unless you include this in init.d:
    echo 0 > /sys/module/autosmp/parameters/enabled
    @apb_axel said he is adding support for autosmp in next UKM release, stay tuned

    Faux zram has been added :)
    34u-zram
    https://mega.co.nz/#!HxYEXbSa!H_zckE2cTCTrkrwbX1giHzkCfYYuzOvxW-iDJ-kdKyg

    As requested here is a 4.4.4 Kitkat Kernel that is in anykernel format and should work with all Kitkat rom's

    Version bump to 35u:
    • autosmp set to default hotplug(disable all hotplugs in synapse before reboot)
    • Faux zRam Added.
    • Repatched in kexec, because of problem reports

    Kitkat Users Flash: (fixed)(fixed again lol)
    https://mega.co.nz/#!q4oXVK7T!R8Na54rIUwQm19af1odmxCTQcoq0vIJWJsfaZ9D45W8
    Android L Users Flash:
    https://mega.co.nz/#!zsokUTRY!kefScnsSFicCjIDCao1Agdpr8QdkZ8mY-1rn1O0tYmI

    Alternatively L users can flash Kitkat version, but init scripts depend on busybox installed.

    Enjoy ;)

    Kernel 37u-r2:
    Updated AutoSmp Hotplug
    Updated Intelliactive
    Updated Faux Sound Control
    Updated Intelli-plug to 3.8
    Added KSM/zram optimizations

    http://www.mediafire.com/download/mq6v4y193p15rtw/defcon-37u-r2-AnyKernel_mako.zip

    http://www.mediafire.com/download/mq6v4y193p15rtw/defcon-37u-r2-AnyKernel_mako.zip

    Kernel 38u-r999:(fixed otg)
    http://www.mediafire.com/download/a629kr04bbaii5f/defcon-38u-r999-AnyKernel_mako.zip

    Ultimate Kernel 2 Updated to 41u:
    • Added savoca's newer msm_hotplug
    • lowmemory killer optimizations
    • added lcd_notify for msm_hotplug
    • max suspend cpu's set to 1 for battery savings

    Download:
    msm_hotplug by default version:
    http://www.mediafire.com/download/v7dy1481edsjjdx/defcon-41u-AnyKernel_msmhp_mako_.zip

    Kernel 43u-r2:
    • More script optimizations and further tweaked autosmp
    • Added autosmp hotplug tunables to 99defcon
    • Added GPU max freq to 400 on boot
    • I dont see the point in uploading two zips one, msm_hotplug and another autosmp
    • default set back to autosmp because its just better ;)
    • Added misc ondemand updates
    • Added intelliactive as default cpu governor to 99defcon
    • Added Intelliactive BOOST to 99defcon init script
    • Added Minfreq down to 81mhz on boot
    • Added Power savings modes to be enabled at boot to 99defcon
    https://mega.co.nz/#!ztw1xAyQ!iJkDyRdwUEqi0Tpw94G-W3u90UjHd-9_vFg_VkxNbQc
    http://www.mediafire.com/download/o69e6ifnn93m79e/defcon-43u-r2-AnyKernel_mako.zip

    New Unleashed Kernel Series 61u(ultimate)
    • New Kernel base based off bleeding edge Code Aurora Code(tons more things than I could list)
    • Fully Compatible with Android L
    • Fully Compatible with Kitkat
    • Fully Synced with mainline Linux 3.4.103-r1
    • Fully Removed mpdecision, & thermald, now using faux's latest intelli-thermal
    • Disabled MSM_Thermal because it was not keeping the temps down and lacks configurable options.(faux's is based on msm_thermal anyways and is much better.
    • Added F2FS Filesystem support
    • Added Faux Gamma by request to replace franco's
    • Added LoUIS API Cache maintenance ops to improve cpu hotplug efficiency/latency
    • Added Kernel Mode NEON acceleration
    • Disabled Prima debug for performance
    • added word-at-a-time ARM API Patches
    • enabled BPF JIT packet filter
    • disabled gentle fair sleepers in scheduler
    • Optimized and Secured AES/SHA1 routines
    • Updated Hardware Accelerated Random Number Generation from Qualcomm
    • backported Codel net scheduler from Mainline Linux and set it as default
    • Updated all CPU Governors with Latest Code Aurora Forum Code
    • Added Backported 3.8 Slub memory allocator from Linux 3.8
    • Added backported RWSEM from Linux 3.11 including lock stealing improvements
    • Added Backported mutex and rcu locking from Linux 3.10 & 3.8
    • Added Backported prandom & random updates from Linux 3.13
    • Built with Latest Linaro Toolchain available with -Ofast optimization
    • Removed unecessary Kernel debugging that slow down performance
    • Removed Tons of unneeded modules taking up memory and slowing down Android
    • Enabled Autogroup scheduler and applied per-uid task grouping for android
    • Removed PMEM completely, this is a Pure ION Kernel
    • Added glibc patch to imrpve performance of memcpy and memmove
    • Added Latest Memory optimizations from Motorola
    • Added Ultra Low 81mhz cpufreq
    • Added Ultra High Overclocking ability to 1.94GHz Per core
    • Added Ultra Kernel Same Page Merging for increased memory performance.
    • Added Latest OTG code available
    • Added GPU underclocking down to 27mhz
    • Added Latest Fast Charge code available
    • Synced Ramdisk with L-Preview (master) for improved compatibility with SELinux on android LPV81C
    • Added missing SE-Linux security options in defconfig
    • Westwood is set to default governor in Unleashed
    • Faux zram was removed because of its outdated code.
    • Added GPU Overclocking to 487mhz(400 is default)
    • Added Latest Franco Interactive GPU governor that replaced Simple GPU Governor
    • Added Latest Faux Speaker updates.
    • Added and Enabled Sweep to dim (Sweep over nav buttons left to reduce brightness(even past factory defaults) swipe right to increase.
    • Added BLX Battery Life extender(does anyone use this?) If so, here ya go ;)
    • Added Latest double tap 2 wake code
    • Added Latest AutoSMP Hotplug, (default)
    • Added Latest Intelli-plug from faux(must disable autosmp in init or Synapse(when @apb_axel fixes it)
    • Added Latest CPU Voltage control
    • Added LZ4 ramdisk compression for increased boot speed
    • Added and enabled KEXEC Hardboot Patch
    • Synced to Latest linux 3.4.103-r1
    • And tons more stuff I forgot, check Synapse for the most options available ;)
    All future versions of this kernel are at the Ultimate Unleashed kernel thread:
    http://xdaforums.com/showthread.php?t=2845768

    [KERNEL] [4.4.4/CM/(L)] [Bleeding Edge] Ultimate Unleashed Kernel Series
    View
    121
    sykopompos
    sykopompos
    pesky wabbits b10

    rebased on the LPX13D preview with N6 apps and frameworks from a LRX-C branch
    Percy got another source for the n6 dump once word got out that we had a dump so we used that to protect my original source so it has the new Google apps and unreleased apps for L

    Huge thanks to Ben, @percy_g2, @defconoi for all the work on this plus @jolinnard for the data on script.

    This build is not deodex'ed so first boot is very long. Give it a couple minutes to settle and connect to the google servers or it will say google play services not install. The new gmail still will, hit the back button and then continue to gmail aftr you are logged in.
    a reboot fixes most errors

    torrent
    https://drive.google.com/file/d/0By0vn8iv_zrVMEJnNWxtbHpTeXc/view?usp=sharing

    afh
    https://www.androidfilehost.com/?fid=95747613655048026

    afh mirror provided by @defconoi
    https://www.androidfilehost.com/?fid=95747613655048039
    View
    107
    sykopompos
    sykopompos
    May the schwartz be with you

    B15 LRX08 and LPX-13D

    LPX-08C
    May the schwartz be with you: http://youtu.be/UHw6KXbvazs
    N6 based
    reverted a lot of the proprietary binaries since they were causing issues along with gpu binaries
    Bug fixes and smashing from B14
    some framework edits for our LG Gee brothers on sprint
    Modified some bluetooth libs (may or may not cause bluetooth calls to work)
    I can't think what else right now

    Download
    https://www.androidfilehost.com/?fid=95784891001602242


    LPX-13D B15
    Based on the official last lollipop preview for the n5
    Bug Fixing Beast
    reverted a lot of the proprietary binaries since they were causing issues along with gpu binaries
    Bug fixes and smashing from B14Modified some bluetooth libs
    I can't think what else right now

    Download
    https://www.androidfilehost.com/?fid=95784891001602627

    supersu 2.16
    http://xdaforums.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133

    Please test these together to make sure everyone's device can handle these now and if it is all good then into the next release

    10/20/2014 adreno drivers made flashable by @defconoi, need a kernel to support the new kgsl drivers
    adreno's https://www.androidfilehost.com/?fid=95784891001602481

    Modified stock kernel updated with the new kgsl drivers (thank you @defconoi )
    Kernel: https://www.androidfilehost.com/?fid=95784891001602571
    View

New posts