[HOW-TO] How to flash a factory image / return to stock / unlock / root #
- Thread starter efrant
- Start date
Can i apply same instructions as stated in OP to unlock my N5
Sent from my Nexus 4
Yes
Sent from my Nexus 6 using Tapatalk
After fastboot flash twrp, my phone keeps booting into twrp... Anybody knows how to fix this? I can't boot into android now...
When i try to reboot the recovery, it goes into the android with a red exclamation mark(stock recovery)...
Update:solved by re-doing the steps. After flashing recovery, I pulled out the USB connection and flash su using twrp. No problems after that. Twrp also stays after reboot
When i try to reboot the recovery, it goes into the android with a red exclamation mark(stock recovery)...
Update:solved by re-doing the steps. After flashing recovery, I pulled out the USB connection and flash su using twrp. No problems after that. Twrp also stays after reboot
Last edited:
No bootloader or radio in latest KitKat image?
Thanks for making such a great guide efrant. I've used it on an N5, now I want to put a N4 back to stock 4.4.4. When I download the image from Google ( occam-ktu84p-factory-b6ac3ad6.tgz ), it doesn't include a bootloader.img or a radio.img to use in your steps. What should I do? I've found various bootloaders and radio images online but don't know which I need.
Thanks in advance for any help, anyone
Thanks for making such a great guide efrant. I've used it on an N5, now I want to put a N4 back to stock 4.4.4. When I download the image from Google ( occam-ktu84p-factory-b6ac3ad6.tgz ), it doesn't include a bootloader.img or a radio.img to use in your steps. What should I do? I've found various bootloaders and radio images online but don't know which I need.
Thanks in advance for any help, anyone
Last edited:
Are you positive there are no bootloader and radio images in the file? Last time I downloaded it, they were there...Thanks for making such a great guide efrant. I've used it on an N5, now I want to put a N4 back to stock 4.4.4. When I download the image from Google ( occam-ktu84p-factory-b6ac3ad6.tgz ), it doesn't include a bootloader.img or a radio.img to use in your steps. What should I do? I've found various bootloaders and radio images online but don't know which I need.
Thanks in advance for any help, anyone
They are there,i flashed kitkat yesterday.
Sent from my Nexus 4 using XDA Free mobile app
when m flashing 5.1.1 factory image on my nexus 4, it says ERROR : UPDATE PACKAGE MISSING SYSTEM.IMG .......then it says press any key to exit :/ what shud i do???
First thing to is to unzip downloaded img file and see what's inside.
It should be 6 files,if i remember correctly.
Sent from my Nexus 4 using XDA Free mobile app
yes there are 6 files!!
1. bootloader-mako-makoz30f
2. flash-all
3. flash-all.sh
4.flash-base.sh
5.image-occam-lmy47v
6.radio-mako-m9615a-cefwmazm-2.0.1701.07
Uncompress the file #5, it is a zip file. It has the rest of the img files
Regards,
Try to download again or try 5.1.0.
Sent from my Nexus 4 using XDA Free mobile app
Make sure all the files from the zip are in the main folder with the bootloader image and radio image and fastboot.exe, NOT is a subfolder.
EDIT: and make sure you are using the latest version of fastboot (http://xdaforums.com/attachment.php?attachmentid=3227867&d=1427252521)
Just to add if you copy & paste the files to you're home screen or desktop then (cd desktop) puts you in the right directory to just run the flash all sh, just remember to remove the flash-all.bat file. If using Linux e.g the command would be .... cd Desktop , followed by sh flash-all.sh
Don't use windows but removing the flash-all.sh and flashing the bat file would have the same affect.
When in bootloader mode and running the command fastboot devices, is your device showing.
I prefer to do it this way instead of the platform tools folder or any sub folder as I can just delete the copied files from my desktop whilst leaving the original files where I decide to store them , I am a little OCD.
Don't use windows but removing the flash-all.sh and flashing the bat file would have the same affect.
When in bootloader mode and running the command fastboot devices, is your device showing.
I prefer to do it this way instead of the platform tools folder or any sub folder as I can just delete the copied files from my desktop whilst leaving the original files where I decide to store them , I am a little OCD.
Hello guys,
Today Nexus 4 got into some problem and I am not able to resolve the issue. I followed the guide and flashed it with latest stock image yet it is not getting ahead of the boot animation logo. Is there anything else I could do?
Did format cache and factory reset as well using stock recovery still no use.
Tried 4.4 did not work. Flashed 4.2.2 worked. So what could be the problem?
Tried Wug's tool as well, did not work. Checked with modified recovery after clearing cache, did not work. Anything else I could try or will I have to use Nexus with outdated OS :crying:
Please help it was working fine with L and some update happened and after this these problem got started.
Today Nexus 4 got into some problem and I am not able to resolve the issue. I followed the guide and flashed it with latest stock image yet it is not getting ahead of the boot animation logo. Is there anything else I could do?
Did format cache and factory reset as well using stock recovery still no use.
Tried 4.4 did not work. Flashed 4.2.2 worked
. So what could be the problem?Tried Wug's tool as well, did not work. Checked with modified recovery after clearing cache, did not work. Anything else I could try or will I have to use Nexus with outdated OS :crying:
Please help it was working fine with L and some update happened and after this these problem got started.
Last edited:
Pls help me~
Could u mind tell me how can u find the right code was "fastboot -c "lge.kcal=0|0|0|x" boot customrecovery.img" ?
Whats is "lge.kcal=0|0|0|x" mean? Coz i must get info my Xperia T2 to backup data~~~I hope can find the right fastboot boot code for it~
THZ a lot~^^
somehow my Nexus 4 works for 3 days and the apps begin to collapse the phone restarts and never wakes up from initial animation the one with color little balls lol... wth with that? ive done everything i can!
Yup, get into recovery, wipe cache, factor y reset but nothing works! Only reflashing the ROM vía fastboot
PD: all these problema began when i changed the charge port, microphone Flex
PD: all these problema began when i changed the charge port, microphone Flex
Help with USB Cable Charging as AC
HI all,
Firstly I love these forums and you all rock and are the friendliest bunch of dudes and ladies (and others) I've seen on an online forum.
I have a quick question about getting NRT to recognize my N4, which has very little to do with NRT but rather what I believe to be the firmware (perhaps Android version) itself. Whenever I plug my USB cable into various USB ports, the phone appears as charging in AC mode - always. I used to have a kernel that allowed for USB fast charge, which I enabled, but I have since factory reset my phone three times (back to 4.3, JWR66Y), tried USB Host Diagnostics by ChainFire, and reloaded the stock configurations for kernel, radio, and system image. I am completely stumped and have no clue what to do. I have tried many different cables and software configurations to no avail. I would appreciate any and all guidance with this as it has certainly caused me undue hardship. I might just throw in the towel and get a Moto X Play.
Currently I`m using faux123`s kernel on 4.3, stock system, stock radio, TWRP 2.7.1.0. I have tried everything stock except the recovery. I worry that if I format the data on my SD card it will leave me without a solution and all of my data, which would be a large spoon of salt in the wound.
I'm willing to try anything to get my computer talking to my phone again. Maybe they had a weird fling one night while I was sleeping and now it's awkward so the phone just charges as AC to ignore my computers calls...
Thanks again, all,
--Mike
HI all,
Firstly I love these forums and you all rock and are the friendliest bunch of dudes and ladies (and others) I've seen on an online forum.
I have a quick question about getting NRT to recognize my N4, which has very little to do with NRT but rather what I believe to be the firmware (perhaps Android version) itself. Whenever I plug my USB cable into various USB ports, the phone appears as charging in AC mode - always. I used to have a kernel that allowed for USB fast charge, which I enabled, but I have since factory reset my phone three times (back to 4.3, JWR66Y), tried USB Host Diagnostics by ChainFire, and reloaded the stock configurations for kernel, radio, and system image. I am completely stumped and have no clue what to do. I have tried many different cables and software configurations to no avail. I would appreciate any and all guidance with this as it has certainly caused me undue hardship. I might just throw in the towel and get a Moto X Play.
Currently I`m using faux123`s kernel on 4.3, stock system, stock radio, TWRP 2.7.1.0. I have tried everything stock except the recovery. I worry that if I format the data on my SD card it will leave me without a solution and all of my data, which would be a large spoon of salt in the wound.
I'm willing to try anything to get my computer talking to my phone again. Maybe they had a weird fling one night while I was sleeping and now it's awkward so the phone just charges as AC to ignore my computers calls...
Thanks again, all,
--Mike
Similar threads
- Poll
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
590I have created this thread to give a step-by-step on how to flash a stock ROM build available on Google's developer site. (For those that are unaware, an unlocked bootloader is needed, and unlocking is part of the instructions below.)
I've also added a section on how to root for those that want it.
Note: There are other methods that are abbreviated and/or faster, but I wanted to spell out each step in the process for the purposes of learning. I'm a big believer in doing things manually before using a "toolkit", much the same way that, in school, we are taught to do math first, before being allowed to use a calculator. See here for some further explanation.
So, without further ado:
How to flash a stock ROM
Step-by-step
Notes:
1) For the n00bs: read the entire post before proceeding;
2) MacOS-specific instructions: a) no drivers needed, and b) replace fastboot in the steps below with ./fastboot-mac
A. Install the drivers
1) Do not install LG drivers or the PDAnet drivers, or any other driver you come across. If you have, and you are SURE they are working properly, fine, leave them. Otherwise uninstall them if you are unsure;
2) Download the drivers from here or from here;
3) Install the drivers. See here on how to install them. Note that the driver has to install twice: once when your device is booted normally (not required for this tutorial) with USB Debugging enabled in Settings, and once when your device is booted in fastboot (i.e., bootloader) mode (which is required for this tutorial). (To enable USB Debugging, you first need to enable Developer options by going to Settings->About phone and tapping 7 times on the build number.) If you are using Windows 8, you will need to do this before installing the drivers.
B. Backup your data
1) Backup all your personal data (e.g., photos, music, etc.) OFF of your device and onto your computer by using whatever method you want that works for you, e.g., MTP, ADB, email, Dropbox, Box.net, whatever.
2) This method will wipe your entire device, including the /sdcard folder, so once you do this, you will not be able to retreive anything that was on your device previously.
3) See here on how to backup your apps and app data if you don't have root.
C. Download the required files to your computer and extract them
1) All of the files that are required, need to be in one (i.e., the same) directory. It does not matter what it is called, but all the files need to be in there, with NO subfolders. EVERYTHING needs to be extracted into this one directory;
2) Download the attachment from the end of this post and extract the contents to the directory created in step 1. (Latest version for Windows is here). Note: if all you want to do is unlock your bootloader, skip to step 7 in this section (C).
3) Download the version of Android you want from here. Make sure you are using an occam image which is for the Nexus 4. Most old versions are not usually available on that site; however, there is a mirror on this site: Random Phantasmagoria.
4) Download the appropriate version (for your computer) of 7-zip from here and install it.
5) Extract the files from within the .tgz file which you downloaded in step 3 using 7-zip, not WinZip or WinRAR or whatever.
6) Make sure you have extracted ALL the files (including extracting any files in any archives inside the .tgz file). You should have six (6) files ending with .img in the directory you created in step 1. The other files you extracted from the .tgz are not necessary;
7) Reboot your device into bootloader mode (by turning it off, hold volume down, and press and hold power) and plug it into your computer;
8) Open a command prompt in the same directory (i.e., make sure you are in the same directory as your files are located). You can hold the shift key when you are in the folder in Windows explorer and right-click in a blank spot and it will open a command prompt.
D. Type in the commands into the command prompt
1) Make sure your computer recognizes your device by typing: fastboot devices
2) Unlock your bootloader (if you have not already done so): fastboot oem unlock
3) You will see a prompt on your device. This will wipe your entire device (including the /sdcard folder). Accept. Note: you use the volume keys to change the option and the power button to accept. You cannot use the touch screen.
4) Reboot by typing: fastboot reboot-bootloader
5) Flash the bootloader: fastboot flash bootloader bootloader-mako-makoz10o.img (or whatever the name of the bootloader image that you downloaded).
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1700.48.img (or whatever the name is of the radio image that you downloaded).
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system system.img
10) Optional, but read note. Flash the data partition: fastboot flash userdata userdata.img Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked. See note 2 below.
11) Flash the kernel/ramdisk: fastboot flash boot boot.img
12) Flash the recovery partition: fastboot flash recovery recovery.img
13) Erase the cache partition:either a) fastboot erase cache OR b)fastboot format cache<<== the second option seems to work better for most people.Thanks joostburg.
14) Reboot: fastboot reboot
15) Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the Dalvik cache.
Now you have a fully stock image on your device. The only thing that is different from out-of-the-box condition is that your bootloader is unlocked. See the notes section at the end of this post for information on re-locking the bootloader.
Note that some users indicate that they can't get past the X on boot. If this happens to you, reboot into the bootloader and select recovery. Then, when you see the Android with the red exclamation mark, hold power and press volume up to take you to the menu. Wipe cache. If that still doesn't work, boot back into recovery and do a factory reset (this will obviously delete all your data & files in /sdcard...).
If you have a 16GB device, and it now shows up as 8GB, reboot into recovery (hold power and press volume up when you are at the screen with the android and the red exclamation mark), and wipe cache. If that still doesn't work, boot back into recovery and do a factory reset (which will obviously delete all your data & files in /sdcard...). Or do this.
E. Optional -- Root
If you want to get root access follow the steps below. (And no, this will not flash a custom recovery, and not, it will not make you "not stock".) Unlocked bootloader required. See steps above.
1) Download (to your computer) the latest version of CWM (from here) or TWRP (from here) for your device;
2) Rename the file to customrecovery.img, and make sure it is in the same directory as your fastboot.exe file;
3) Download (to /sdcard on your device) the latest version ofeither ChainsDD's Superuser (not currently working), orChainfire's SuperSU orKoush's Superuser; NOTE: So far, only SuperSU v1.43 and newer currently work properly with JWR66V (i.e., 4.3). I've attached v1.51 below.
4) Restart your device in fastboot mode and plug into computer;
5) Open a command prompt in the directory mentioned above and type: fastboot boot customrecovery.img Note: Only if you are running the z20i bootloader: the command would be: fastboot -c "lge.kcal=0|0|0|x" boot customrecovery.img Thanks hwti & el_charlie
6) Wait for it to boot;
7) Navigate the menus the recovery menu on your device and select an option like "update zip from sdcard". Find the zip that you downloaded, and apply it.
8) Reboot. Done.
Notes:
1) Yes, you will receive the OTA update notification (when it is available) for the next update. WHEN you get the update notification, IF you want it to install automatically, you will need to ensure that that you are using the bootloader, radio, boot, radio and recovery images for the .tgz package you downloaded. Otherwise, the update will not install automatically.
2) There has been a lot of uncertainty and questions around stock ROMs and losing/wiping data. You CAN flash a stock ROM WITHOUT losing the data stored in /sdcard (and possibly even all apps and app data, although this depends on which apps you have installed). This can be done by skipping step 10 in part D. However, if your device goes into a boot loop, you will need to boot CWM, and wipe data <-- this will wipe your apps and app data, but not /sdcard.
3) Do NOT re-lock your bootloader after you are finished. The is no need. 2) Having an unlocked bootloader does not affect anything related to the ROM/GoogleWallet/OTAs. Nothing at all. If your bootloader is locked, you CANNOT use fastboot commands. This is pretty much the only thing it affects. If your bootloader is locked, and you need to unlock it, it will wipe everything, including /sdcard. This is the major drawback of re-locking your bootloader. If you do want to lock your bootloader, the command is: fastboot oem lock85How to return to stock if your USB port is broken
I am adding this how-to in case people need it, for return their device to Google, etc.
This is NOT meant to replace going through the steps in post #1. They are there for your learning, and should be used as a primary method of returning your device to stock. However, if your USB port is indeed messed up, then you will not be able to use the instructions in post #1.
Warning: if your USB port is indeed broken, and you complete all the steps below, you will have NO possible way at all to unlock your bootloader, or get root, or install a custom recovery. Period.
1) Ensure that you have root, and a custom recovery (CWM or TWRP) installed;
2) Download segv11's BootUnlocker app from the Play Store, install it and lock your bootloader with it;
3) Download the odexed version of this file (stock JDQ39 ROM) and place it on your device;
4) Download the JDQ39 stock boot image from here and the stock JDQ39 recovery from here.
5) If you want, you can also download the 0.48 radio and the z10o bootloader from here.
6) Reboot into CWM and flash the three files you downloaded in steps 3 and 4, and the file(s) you downloaded in step 5;
5) Turn off your device and reboot into the bootloader;
6) Go to recovery and access the stock recovery menu (i.e., when you see the android with the red triangle, hold power and press vol up) and do a factory reset and then wipe cache.
7) Reboot your device. Do NOT install any OTA updates if they present themselves. Read and follow this post.
8) Done. Now you are fully stock JDQ39 with a locked bootloader.10
It happened to me the same thing... I did everything right just as suggested in every step, but my phone won't get past the X logo... I solved it by going to the stock recovery (unhide the menu by pressing POWER+VOL. UP), wipe data/factory reset, wipe cache partition. Reboot (to me it rebooted automatically after wiping the cache partition) and everything went fine, it took very few time to get past the X logo...
Hope it works for you too.8
You can still boot a recovery without flashing it, but you have to specify the kernel command line
Solution 1 (works on my N4, not sure it will work for all hardware revisions) :
- fastboot boot customrecovery.img
- you see a blank screen
- get the default fastboot kernel command line : adb shell cat /proc/cmdline
- adb reboot-bootloader
- Append lge.kcal=0|0|0|x to the default fastboot kernel command line :
fastboot -c "your_default_command_line lge.kcal=0|0|0|x" boot customrecovery.img
Solution 2:
- fastboot flash recovery customrecovery.img
- launch the recovery from the bootloader
- wait until it's loaded
- get the bootloader kernel command line : adb shell cat /proc/cmdline
- adb reboot-bootloader
- fastboot flash recovery stockrecovery.img
- Use the bootloader command line to launch the recovery from fastboot :
fastboot -c "your_bootloader_command_line" boot customrecovery.img
