Post Reply Subscribe to Thread Email Thread

No LED notification after screen replacement

15th June 2014, 02:11 PM |#1  
OP Junior Member
Thanks Meter: 0
1 posts
Join Date:Joined: Apr 2012
Yesterday I replaced my screen since the old one broke. I bought the frame, lcd and digitizer together since I don't have the skills nor the patience to replace the digitizer by itself.

After I assembled everything I checked if everything worked and it did except for the LED notification. When I got the new screen I noticed it looks a bit diffrent from the old one.
The new one has a visible circle where the LED should be (1st attachment) while the old didn't have it. (2nd attachement)

I dissassembled everything to check if I missed something but everything was connected.
I did notice that on the old frame there is a bit of rubber (3rd attachement) which I didn't replace since it was glued in pretty hard and I would damage it if I tugged any harder. I would be really surprised if that was the reason for the LED not working.

Any suggestions?
Attached Thumbnails
Click image for larger version

Name:	IMG_20140615_140830  kopia.jpg
Views:	66
Size:	180.7 KB
ID:	2799578   Click image for larger version

Name:	IMG_20140615_141146  kopia.jpg
Views:	64
Size:	257.1 KB
ID:	2799579   Click image for larger version

Name:	IMG_20140615_141207  kopia.jpg
Views:	58
Size:	253.4 KB
ID:	2799580  
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes