Works with aosp and cm,i tested on both. Can you upload a zip please, i am in holidays with my son and not back before next week and I have no pc here, with the img i can't use it with secondary Rom. Thanks.
[KERNEL][Singularity-5.4][SKA-APK-12.1][SaberMod-6.0][Graphite -03][3-08]
- Thread starter apophis9283
- Start date
- Status
What ROMs did you try? Xenon and pure nexus I got a boot loop. Temasek worked fine though.
Flashable zip https://copy.com/HXZcsDbXplEadehx
Last edited:
CM , Temasek and Chroma, i Test Pure Nexus now. Thanks for the zip 
I think i know where the problem is but i test it myself to be sure i will report in the evening
I think i know where the problem is but i test it myself to be sure i will report in the evening
Last edited:
Im setting up a build environment just for the kernel. Makes it a kittle easier on me
Is anyone else frequencies locking? I'm on official cm and mine or stuck on 2.6
Sent from my Nexus 6 using Tapatalk
Sent from my Nexus 6 using Tapatalk
Mp decision should be disabled by default. make sure you dont have it on. You can also flash this.
If you are using TWRP then in secondary you select remove boot image then add boot image
IMG files work great with TWRP and multirom
Hm and this will flash the img on the secondary rom ?
I did not know but I have never tested it, never stop learning
it's not the same option as flashing on the secondaryHm and this will flash the img on the secondary rom ?
If you select your Rom after listing them, there's an option to remove boot image after that finishes there is an option to replace boot image
I'm also stuck at 2649. I tried flashing the fix but I'm still stuck at 2649 and 300 megahertz. I'm on benzo ROM
Try a wipe and reflash. Also flash ukm again in case the issue is there
Are we using synapse here to control?
I'm using built in kernel auditor, is this enough?
Where is ukm?
Last edited:
Yeah. I was going to put it in the op with authorship
Just ben struggling with compiling the kernel stand alone. So i wouldnt have to rely on bliss rom
http://xdaforums.com/android/software/zip-synapse-script-universal-kernel-t2736986
flash ukm then install synapse
I got the kernel compiled but it uses zImage so i have to get it to boot.img and i can get it into a zip
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
85
I PRESENT TO YOU, SINGULARITY KERNEL
(Team Singularity consists of apophis9283 and Yoinx)
##JUST TO PROTECT MY A**##
THIS KERNEL COMES WITH NO WARRANTY. I WILL NOT BE HELD LIABLE FOR ANY DAMAGE TO YOUR PHONE OR GET FIRED FROM WORK BECAUSE THE ALARM DIDNT GO OFF. BY DOWNLOADING THIS KERNEL YOU TAKE ALL THE RESPONSIBILITY THAT COMES WITH IT.
##### TO CONTROL THIS KERNEL AND ALL ITS FEATURES WE HAVE A MODIFIED KERNEL AUDITOR FOR YOUR ENJOYMENT #####
##### MORE INFO AND DOWNLOADS IN POST 2 #####
#####FEATURES#####
-WORKS ON BOTH AOSP AND CM BASED ROMS
#COOKED WITH#
-SABERMOD-6.0-CORTEX-A15
-03 Opitimizations
-GRAPHITE
-LZ4 Compression
-F2FS SUPPORT
-NO FORCE ENCRYPTION
-PERMISSIVE
-CHOOSE BETWEEN BCL_ENABLED/BCL_DISABLED--(Must be using our Kernel Auditor from post 2)
What is BCL?
BCL polls the battery monitor system for various values such as voltage, current and temperature through the battery. This driver is meant to help prevent possible reboots, but with it removed on several devices we have seen no issues. The way it prevents reboots is by setting thresholds and when the threshold is passed or tripped, it will throttle or unplug cores.
#MSM_LIMTER#
(Complete control over your CPU)
(Per core control over min/max)
(You can set governors for each core)
(MIN CPU IS 223MHz - MAX CPU IS 3096MHz)
#####OUR FREQUENCY TABLE#####
< 35800 35800 762 >,
< 98300 98300 762 >,
< 223200 223200 762 >,
< 300000 300000 1144 >,
< 345600 345600 1144 >,
< 422400 422400 2288 >,
< 499200 422400 2288 >,
< 576000 499200 3051 >,
< 652800 499200 3051 >,
< 729600 576000 5996 >,
< 806400 576000 5996 >,
< 883200 576000 5996 >,
< 960000 960000 8056 >,
< 1036800 1036800 8056 >,
< 1113600 1036800 8056 >,
< 1190400 1036800 8056 >,
< 1267200 1036800 10101 >,
< 1344000 1036800 10101 >,
< 1420800 1036800 10101 >,
< 1497600 1036800 10101 >,
< 1574400 1574400 12145 >,
< 1651200 1574400 12145 >,
< 1728000 1651200 12145 >,
< 1804800 1651200 12145 >,
< 1881600 1651200 16250 >,
< 1958400 1728000 16250 >,
< 2035200 1728000 16250 >,
< 2112000 1728000 16250 >,
< 2188800 1728000 16250 >,
< 2265600 1728000 16250 >,
< 2342400 1728000 16250 >,
< 2419200 1728000 16250 >,
< 2496000 1728000 16250 >,
< 2572800 1728000 16250 >,
< 2649600 1728000 16250 >,
< 2726400 1728000 16250 >,
< 2803200 1728000 16250 >,
< 2880000 1728000 16250 >,
< 2956800 1728000 16250 >,
< 3033600 1728000 16250 >,
#GOVERNORS
-ABYSSPLUGV2
-ADAPTIVE
-ALUCARD
-BARRY_ALLEN
-BIOSHOCK
-BLU_ACTIVE
-CONSERVATIVE
-CONSERVATIVEX
-DANCEDANCE--(DEFAULT GOVERNOR)
-DARKNESS
-DESPAIR
-DYNAMIC_INTERACTIVE
-ELEMENTALX
-HYPERX
-INTELLIACTIVE
-INTERACTIVE
-INTERACTIVE_PRO
-LIONHEART
-LIONFISH
-LULZACTIVE
-MYTHX_PLUG
-NIGHTMARE
-ONDEMAND
-ONDEMAND_EPS
-ONDEMANDPLUS
-PERFORMANCE
-POWERSAVE
-PEGASUSQ
-PMC --(PERFORMANCE MAY CRY) Its a real battery saver but lag is possible
-RAGINGMOLASSES
-SMARTMAX
-SMARTASSV2
-SMARTASSH3
-SMARTMAX_EPS
-UMBRELLA_CORE
-WAVE
-WHEATLEY
-XPERIENCE
-ZZMOOVE --(PROFILE 6 IS DEFAULT)
#MPDECISION REPLACEMENT
ZEN_DECISION--(DEFAULT)
#HOTPLUGS
-ALUCARD_HOTPLUG
-AUTOSMP
-BLU_PLUG
-INTELLI-PLUG_5.0
-MAKO
-MSM_SLEEPER
-BRICKED_HOTPLUG
#THERMAL
FRANCO THERMAL (YOINX ADDITIVES)
#I/O SCHEDULERS
-BFQ
-CFQ--(DEFAULT)
-DEADLINE
-FIOPS
-FIFO
-NOOP
-ROW
-SIOPLUS
-TRIPNDROID
-VR
-ZEN
#GPU
-UC/OC (MIN 100MHz/MAX 700MHz)
#####OUR GPU FREQUENCY TABLE#####
IDLE AT 25MHz
100MHz
150MHz
220 MHz
300MHz
389MHz
430MHz
500MHz
600MHZ
700MHz
#GPU GOVERNORS
-CACHE_HWMON
-CPUBW_HWMON
-MSM-ADRENO-TZ
-USERSPACE
-POWERSAVE
-PERFORMANCE
-SIMPLE_ONDEMAND
-MSM_CPUFREQ
#GOVERNOR TUNEABLES
-ADRENO_IDLER TUNABLES
-SIMPLE_ONDEMAND TUNABLES
#GPU SPECIAL ITEMS
-A BUTTON YOU CAN SELECT TO INCREASE PERFORMANCE FOR GAMING
#TCP CONGESTION CONTROL
-HTCP
-RENO
-BIC
-CDG
-CUBIC
-WESTWOOD--(DEFAULT)
-HIGHSPEED
-HYBLA
-VEGAS
-VENO
-SCALABLE
-LP
-YEAH
-ILLINOIS
-SOCIOPATH
###OTHER FEATURES###
-CPU BOOST DRIVER
-ADD RANDOM
-DISABLE I/O STATS
-I/O TUNABLES
-ROTATIONAL
-NR REQUESTS
-UKSM
-LOW MEMORY KILLER
-WAKE FEATURES- WITH TUNEABLES. Huge thanks to Yoinx.
-KEXEC
-READ AHEAD SIZE IS 1536 (I would leave it at that)
-I/O TUNABLES
-KCAL
-Z-RAM
-VIRTUAL MEMORY
-MEMORY TWEAKS
-POWER SUSPEND OPTIONS
-USE FB NOTIFIERS
-USB FASTCHARGE
-TONS OF WAKELOCKS YOU CAN CONTROL
-ADAPTIVE LMK
-LMK PROFILE
-WIFI SCAN INTERVAL
-VM HEAPSIZE
-ALLOW PURGING OF ASSETS
-GENTLE FAIR SLEEPERS
-ARCH POWER
-USING MM WIFI DRVERS WITH EXTRA COMMITS THAT HOPEFULLY MAKE IT ACT BETTER
###INFO###
##### FOR INFO ON GOVERNORS AND HOTPLUGS LOOK AT POST 3. IT HAS A PAGE THAT WILL INFORM YOU. #####
#####SINGULARITY-UKM#####
We have the UKM options to match the features we have in the kernel. As well as Live stats. Included are (If its a temperature its in both Celcius and Fahrenheit)
-CPU PVS/SPEED Level
-BATTERY TEMPERATURE
-CPU FREQUENCY
-CPU TEMPERATURE
-GPU FREQUENCY
-GPU TEMP
-MEMORY (TOTAL AND FREE)
-UPTIME
-UNUSED STATES
-TIME IN STATES
-WAKELOCKS
###SHOW YOUR SUPPORT###
Flashable Zip that makes your boot logo say SIngularity
They are attachments at the bottom of the OP
Use SINGULARITY_BOOTLOADER_SPLASH.zip to flash our boot logo
Use STOCK_BOOTLOADER_SPLASH.zip to go back to stock boot logo
### CHANGELOG/SOURCE ###
https://github.com/Team-Singularity/Singularity/commits/apophis
#####KERNEL DOWNLOAD#####
##### TO CONTROL THIS KERNEL AND ALL ITS FEATURES WE HAVE A MODIFIED KERNEL AUDITOR FOR YOUR ENJOYMENT #####
##### MORE INFO AND DOWNLOADS IN POST 2 #####
Mod Edit
#####CREDITS#####
YOINX FOR SKA, THE APP TO CONTROL OUR KERNEL
FOR HELPING OUT HELLSGOD
DESPAIR FACTOR FOR THE INFO ON BCL
FOR SINGULARITY BOOT LOGO DROIDPHILEV
FOR ALL THE WORK FROM OTHERS I USE
THANKS TO THEM ALL22To figure out what combo of settings are good for battery/performance you can go to this site. It even breaks them down into what they are and how they act.
http://androidmodguide.blogspot.com/p/blog-page.html18YYoinxSingularity - Kernel Adiutor v12
So, @apophis9283 gave me the second post. Yeah, apparently he knows "knows people in high places"? So he says anyway.
Anyway. Given the huge issues we were having with UKM and Synapse, we're now just going to be heavily modifying Kernel Adiutor to have the options that we want. However, this is my first delve into app development... I've always been more of a kernel guy (C mostly).
Keep in mind that this is a Work In Progress. Some features have not been included yet, others are broken from upstream (automatic downloading and flashing of zips). Hopefully everything will be added/fixed quickly, but I offer no ETA's.
*Important Note: Many Roms (especially CM based) have a long delay in the amount of time that the BOOT_COMPLETE broadcast takes before it's sent. Most roms include, as part of init, default values that get set on boot complete. This interferes with this app setting it's values on boot. To work-around this, increase the delay for setting values on boot to something around 20 seconds. On AOSP based roms this doesn't appear to be an issue.
Without Further Ado,
Here's the download link for V12
Also, the link to our Github for legal reasons
The Github commit history will also serve as a changelog. I'll try to keep the commit messages clear so that it's obvious what's added/changed. I'll also do my best to add markers in the form of empty commits in the history so that it's easy to see what's been changed since the last version that you installed.
These apks will be signed by me, so you will not be able to update them from the playstore.
Our github shows where it was forked from, but just as an additional courtesy and to render proper credits. The original github is here none of this would be possible with Grarak's work. While the about page in our app is modified (to help reduce erroneous info being submitted to his github and g+) the rate app and donate popups still point to his links so that he can get proper respects.
Eventually, I may submit my changes to him as pull requests... But I'm unsure the coding is clean enough to really do so.
*edit*
Starting with V4, I've added support for High Brightness Mode intents to toggle the mode from apps like tasker.
Toggle on: com.singularity.kerneladiutor.action.HBM_ON
Toggle off: com.singularity.kerneladiutor.action.HBM_OFF99OK, very exciting day for Singularity, Kernel Version 3.6 is live in the OP. If you look at post 2 you will see a modified Kernel Auditor that has our features available. HUGE HUGE THANKS TO YOINX. AMAZING WORK. Check it out. No more UKM and Synapse not holding settings after a reboot. He worked really hard on it and it is a work in progress. Enjoy the hell out of it.
Thank the hell out of post 2. He deserves it
Checkout the downloads section, not working yet but you get the idea
IF YOU HAVE KERNEL AUDITOR ALREADY INSTALLED YOU WILL NEED TO DELETE THAT ONE FIRST THEN INSTALL OURS
Also the link for the kernel in the op is now a direct link
BCL is now togglable
New posts
-
Software update option is not available
- Latest: Jerryrice1
-
-
-
