FORUMS
Remove All Ads from XDA

[KERNEL] Nexus S Trinity Max 1.1/Vmax 1.2 Kernel - 2/10/2011

7,210 posts
Thanks Meter: 13,085
 
By morfic, Recognized Developer on 30th December 2010, 11:09 PM
Thread Closed Email Thread
Trinity Max is a Kernel for Nexus S running conservative core voltages at each OC level.
Trinity Vmax only differs in extended voltages at each OC level.
I recommend Max, Vmax is if you want to see if you can squeeze out just that last ounce of clock speed and are comfortable with the higher core coltages.

Perfectly fine to use setcpu including screen off profiles below 800MHz. Thanks to coolbho3k's patch that fixes the policies during suspend/sleep and restores the previous on resume.

This is for.Android 2.3.2.or below.

What you get:

Quote:

Safe Boot to 1.0GHz.
OC Levels of 1.2GHz, 1.3GHz, 1.4GHz, 1.5GHz, 1.6GHz
1000HZ
Voodoo-Sound (Thanks Supercurio)
Low-Freq Sleep Fix (Thanks Coolbho3k)
Build optimizations
Build system tweaks
Ext4 mount fix (aka. Turbo Boost)

Trinity-Max-CM7-1.1
Trinity-Max-Bionix-1.1
Trinity-Max-StockRom-1.1


Vmax:

Quote:

Safe Boot to 1.0GHz.
OC Levels of 1.2GHz, 1.3GHz, 1.4GHz, 1.5GHz, 1.6GHz
Higher Voltages than the Max series Kernels
1000HZ
Voodoo-Sound (Thanks Supercurio)
Low-Freq Sleep Fix (Thanks Coolbho3k)
Build optimizations
Build system tweaks
Ext4 mount fix (aka. Turbo Boost)

Trinity-Vmax-CM7-1.2

Trinity-Vmax-cm7-v1.1
Trinity-Vmax-bionix-v1.1


Stock:

Quote:

Stock Frequencies and Voltages
BFS (Thanks Con Kolivas)
1000HZ
Voodoo-Sound (Thanks Supercurio)
Low-Freq Sleep Fix (Thanks Coolbho3k)
Build optimizations
Build system tweaks

Kernel for Stock Roms
Kernel for cm7
Kernel for Bionix NS


Experimental UV Big Bore kernel available: Trinity-UV-108BB-Experimental


------------------------------------------------------------------
BT Trouble? Not in this house!

method of assurance: (lost track who said it first, it's in this thread, thanks)

- switch wifi OFF, switch BT OFF
- update kernel
- FIRST: on reboot switch BT ON
- THEN switch WiFi ON
The Following 34 Users Say Thank You to morfic For This Useful Post: [ View ]
 
 
30th December 2010, 11:13 PM |#2  
RinTinTigger's Avatar
Senior Member
Thanks Meter: 24
 
More
Can we get an Update.zip ?
and maybe for MoDaCo?

i know youve been waiting for these questions ^^
30th December 2010, 11:30 PM |#3  
morfic's Avatar
OP Recognized Developer
Flag San Antonio
Thanks Meter: 13,085
 
More
Quote:
Originally Posted by RinTinTigger

Can we get an Update.zip ?
and maybe for MoDaCo?

i know youve been waiting for these questions ^^

Yes, you can, later.
Copy/paste on modaco? i could. always forget that nice place for some reason.
The Following User Says Thank You to morfic For This Useful Post: [ View ]
30th December 2010, 11:32 PM |#4  
RinTinTigger's Avatar
Senior Member
Thanks Meter: 24
 
More
Thanks for creating flash zip later.

And i ment a working kernel for the MoDaCo custom rom r3 ^^
30th December 2010, 11:45 PM |#5  
morfic's Avatar
OP Recognized Developer
Flag San Antonio
Thanks Meter: 13,085
 
More
Quote:
Originally Posted by RinTinTigger

Thanks for creating flash zip later.

And i ment a working kernel for the MoDaCo custom rom r3 ^^

What does it need in init.rc to work?
If it does nothing special, it would work anyways, and if it does special stuff, link me to the initrd they use and i can build one with that.

I Will push the modified source to github once i am done, then they can take care of that if i don't before then.
The Following 2 Users Say Thank You to morfic For This Useful Post: [ View ]
31st December 2010, 12:39 AM |#6  
Senior Member
Thanks Meter: 76
 
More
Cool!

Any chance you could post your patches?
31st December 2010, 12:43 AM |#7  
Senior Member
Thanks Meter: 26
 
More
here is boot.img. i put the .ko in /system/modules in the ramdisk folder and compiled but still error for wifi. im sure i did it wrong. anyways, its a bootable/flashable img. my phone boots off it.

Code:
fastboot boot oc.img
Attached Files
File Type: zip oc.img.zip - [Click for QR Code] (3.14 MB, 177 views)
The Following User Says Thank You to k0mpresd For This Useful Post: [ View ] Gift k0mpresd Ad-Free
31st December 2010, 12:46 AM |#8  
unremarked's Avatar
Senior Member
Out There
Thanks Meter: 203
 
More
Quote:
Originally Posted by k0mpresd

here is boot.img. i put the .ko in /system/modules in the ramdisk folder and compiled but still error for wifi. im sure i did it wrong. anyways, its a bootable/flashable img. my phone boots off it.

Code:
fastboot boot oc.img

Also contains the ext4 optimizations? /hope

I feel the need, the need for speed!

EDIT: And is this only for the stock kernel, or will it work on CM7?
31st December 2010, 12:48 AM |#9  
Senior Member
Thanks Meter: 26
 
More
yes, has ext4 mod.
31st December 2010, 12:52 AM |#10  
RinTinTigger's Avatar
Senior Member
Thanks Meter: 24
 
More
Not booting on MoDaCo r3 :/
31st December 2010, 02:53 AM |#11  
Senior Member
Thanks Meter: 17
 
More
So basically just push the .ko and boot the zImage in fastboot?
What is the purpose of the line that's being added to the build.prop?
Thread Closed Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes