FORUMS

Which OEM Would You Like to Help?

Most manufacturers have moments of greatness and moments of decadence, and in the past few years … more

Root T-Mobile S6/Edge on 5.1.1 Without Tripping Knox

If you purchase phones from a carrier, you may be no stranger to the difficulties … more

IonVR Coming Soon, HTC M9 Dev Edition Gets Android 5.1 – XDA TV

The HTC M9 Developer Edition has received Android 5.1. That and … more

Android 5.1.1 Omni ROM For Motorola Xoom

Back in Feb 2011, the Motorola Xoom became the first device to be sold with Android 3.0 … more

[VIDEO REVIEW] Diztronic TPU for OnePlus One

956 posts
Thanks Meter: 893
 
Post Reply Subscribe to Thread Email Thread
It's being processed right now, should be up in a few minutes. Here's some pictures in the mean time





If you'd like to see my other videos, consider subscribing by hitting the image below

Last edited by WinDroidGuy; 8th September 2014 at 12:38 AM.
 
 
8th August 2014, 04:57 AM |#2  
Senior Member
Thanks Meter: 317
 
More
That spot on the bottom corner is simply the injection molding point, not a defect.
8th August 2014, 05:56 AM |#3  
Quote:
Originally Posted by Kawaisa

That spot on the bottom corner is simply the injection molding point, not a defect.

Thanks for the info, I didn't think it was a defect. I was just saying I noticed it being different.

Sent from my One
8th August 2014, 06:06 AM |#4  
Recognized Developer / Recognized Contributor
Flag New York, NY
Thanks Meter: 22,072
 
Donate to Me
More
Quote:
Originally Posted by WinDroidGuy

Thanks for the info, I didn't think it was a defect. I was just saying I noticed it being different.

Sent from my One

Quote:

Other than that, the injection molding mark: you can see it clearly in the picture above on the red case (to the left of the speaker hole). If you've ordered one of our Nexus 5 cases in the past 3 months or so, or any of our S5 and LG G3 Cases, you probably received a case that had a similar mark on the bottom. This is where the plastic gets injected into the mold, afterwords a small mark is left. We used to put it on the bottom or top corner of our cases, or sometimes along the edge of the microUSB hole in an attempt to hide it. The factory recently figured out a new technique to make it a small dot on the bottom of the case instead of the larger and longer mark we had before. It looks a lot better than the old mark on the corner of the case did, but I know no one wants a mark on their case no matter how it looks. I'd love to put it on the inside of the case, but I'm told that isn't an option.

http://forum.xda-developers.com/onep...9#post54615639
8th August 2014, 05:43 PM |#5  
Quote:
Originally Posted by zephiK

http://forum.xda-developers.com/onep...9#post54615639

Thanks

Sent from my HTC6525LVW using Tapatalk
12th August 2014, 06:03 AM |#6  
After a couple days of use, I'm still impressed with it

Good job on it @OneStepAhead
12th August 2014, 03:44 PM |#7  
vgs929's Avatar
Senior Member
Thanks Meter: 22
 
More
Is the case grippy or does it slide around in your hand?
12th August 2014, 05:08 PM |#8  
Recognized Developer / Recognized Contributor
Flag New York, NY
Thanks Meter: 22,072
 
Donate to Me
More
Quote:
Originally Posted by vgs929

Is the case grippy or does it slide around in your hand?

It kind of slides in my opinion, but then again of course it will since we're so used to the Sandstone being so grippy. But I don't really ever have the idea of my phone sliding out of my hand when using the Diztronic TPU. I'm really bad at explaining these kind of things but I hope that helps.
13th August 2014, 12:56 AM |#9  
I don't have any issues with it.

Sent from my HTC6525LVW using Tapatalk
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes