Or Continue to Thread: [FAQ] GT540 Reference Thread |…
Find Your Device:
26th April 2011, 03:14 AM   |  #26  
lavero.burgos's Avatar
OP Senior Member
Flag Guayaquil
Thanks Meter: 1,317
 
2,518 posts
Join Date:Joined: Mar 2011
Donate to Me
More
Question [FAQ] My Phone is bricked !!! | GUIDE
THANKS TO ilovelg FROM MODACO!

So you failed to read the TUTORIAL and bricked your phone while trying to flash GT540, here is what you should try to do:

[HOW-TO] Repair your device if you see only LG logo | Nothing else happens when you boot your device
  • Make sure you use USB ports that are in back of youre PC, dont use front ones.
  • Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
  • Try to reflash your phone again, in the normal way.
____________________________________________

[HOW-TO] Repair your device if it feels like dead | When you click power button nothing happens (Note that this may or may not work)
  • Make sure you use USB ports that are in back of youre PC, dont use front ones.
  • Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
  • Try to boot your phone into Emergency/Download mode (VOL DOWN + POWER).
    • If the phone booted into Emergency/Download mode, launch KDZ Updater.
    • In TYPE dropdown menu, choose EMERGENCY.
    • Load KDZ(ROM) and flash your phone.
  • If the phone failed to boot into Emergency/Download mode (VOL DOWN + POWER), launch KDZ Updater.
    • In TYPE dropdown menu, choose CS_EMERGENCY.
    • Load KDZ(ROM) and flash your phone.
____________________________________________

THANKS TO fishears
FROM XDA!

[HOW-TO]
Repair your device if you don't see LG logo, boot animation | Recovery doesn't show up

  • Download the French v20A and the out.kdz
  • Take out your battery, SIM and SD card
  • Plug USB into PC (but not phone yet)
  • Hold (VOL DOWN) button and plug USB into phone | *Phone goes into Download Mode
  • Run KDZ Updater
    • In TYPE dropdown menu, choose CS_Emergency mode
    • Load French V20A ROM and flash it
  • When it's finished pull out USB again and hold (VOL DOWN) and reinsert USB to put phone back in Download Mode
  • Launch KDZ Updater (still in CS_Emergency mode)
    • Load out.kdz and flash it
You should now have your boot animations back and you can flash whatever ROM you want to use.
____________________________________________

LAST RESOURCE:
Quote:

If the phone still doesn't work, take your phone to local LG Warranty service or your Operator where you got the phone. Tell them that after you turned the phone off, it doesn't seem to turn back on again!

Last edited by lavero.burgos; 26th April 2011 at 03:16 AM.
The Following 4 Users Say Thank You to lavero.burgos For This Useful Post: [ View ]