[thierryb]

My contribution to get an improved rom :

Complains :

C1/ Battery life is to short. O2 and Arima have to find parameters to have longer battery life in "normal" usage.
Members : hellogts, leek, divi168, Tunigszocske, JamesManios

C2/ bluetooth stack is note the best one. O2 and Arima can change from the Microsoft stack to the Boradcom/Widcomm one or provide us WM06 upgrade
Members : hellogts, thierryb, leek, swain69, saman2184

C3/ Flame has a graphic process unit from Nvidia, the GoForce 5500. This gpu is declared to be compatible with the Intel 2700G, and support OpenGLES. It is quite true, but not completely. We would appreciate if O2 and Arima help developers to port their game softwares or video softwares like TCPMP to the Flame.
Members : Menneisys, JamesManios, thierryb

C4/ Communication about an upgrade into WM06 is not consistent. We know that is not easy, but O2 and Arima need to have a consistent communication.
Members : shaileshashar, try4deepak, thierryb

C5/ O2 support need to be improved and not give standard answers, espacially when people tried to give precise informations.
Members : thierryb, ianpac, jags1, JamesManios, igalan, keekee, -johno-, swain69

C6/ The Flame is a pdaphone, so a phone. We need normal usage of a phone, being able to use an headset continiuosly, being able to tell the name and start a call. We have tried different software and none of them works for two reasons : the first one is the connection can not be initiated by the headset, and second reason the bluetooth stack do not like the usage of a software like Microsoft Voice Command and communication using bluetooth and an headset.
Members : leek, thierryb, igalan, JamesManios, keekee

C7/ It would be a pity if the Flame is not able to improve by adding bigger and bigger cards. Please O2 and Arima upgrade the rom to support SDHC cards.
Members : thierryb, dollardollar,

C8/ Flame receive MMS, but we con not set ringtone. Please O2 and Arima, improve that.
Members : keekee

C9/ It could be usefull if we could wakeup the phone using the call button or another one, and not only the on/off one.
Members : thierryb, leochan2005, jags1

Bugs :
B1/ With some softwares like GarminQue, NoniGPSPlot, PV Player, the display is badly drawn. Please O2 and Arima work with these developers what is the problem, if it comes from the device or bad usage of APIs by developers, and give them informations.
Members : thierryb

B2/ Memory cards are not always recognized after a softreset or a wakeup. Brands that are concerned : Sandisk, Transcend
Members : thierryb, JamesManios, igalan

B3/ Duplicate entries in the notification database at each soft reset.
Members : thierryb, JamesManios, igalan

b4/ Simtool kit applications are not always visible, and often hangs when they are used.
Members : thierryb

b5/ Battery indicator is not always accurate. Sometimes it is charged, and the led stay red; sometime it says 100% but the voltage is less than the maximum, and sometimes quite low, below 4.0v
Members : thierryb, fudgebottomn, leek, bimmer159, igalan, JamesManios

b6/ Sometimes additional SIP are not charged. Exemples : Calligrapher, Tengo, SPB Keyboard,
Members : thierryb, denizenx, jags1

b7/ Bluetooth stack is not compatible with headset and some softwares. Exemples : Microsoft Voice Command, Resco Audio Recorder
Members : thierryb, leek

B8/ The Flame automatically switch back itsel to Automatic for CpuPower, instad of staying in Performance
Members : JamesManios

B9/ Wifi stack seems to have a problem. We expriment more crashes, and need to spft reset, when the device was sleeped with the Wifi on. We have less problem when we switch of the Flame with the wifi stack off.
Members : JamesManios, thierryb, igalan

B10/ The screen is not stable. It is like it moves when you are clicking near some cormners.
Members : Leek, thierryb, archel

B11/ Not able to do a call or close a call after 10 or 15 calls. Need to do a reset as workaround.
Members : naval_notorious

B12/ Sometimes, the device do no charge even plugged to the charger and start to be very hot. However, the led is red and third party softwares confirm that he is charging. The level of consumption is 280 mA mesured by acbpowerMeter. So there is no reason of that. It is necessary to reset it (Soft reset was not enough, I needed to shut off the flame completely, ie long press on on/off button). And after everything is ok.
Members : thierryb

B13/ I have set my phone to turn off after 1 min (Settings/System /Power). When I do a call that last more than 1 min, the phone turns off but I can continue to talk. When I close the conversation, the phone goes on but without backlight. And touchingthe screen does not go the light on.
Members : thierryb, igalan

B14/ If you try to record video directly onto the SD card, the image freezes although the sound continues. It works fine if you record onto the internal memory.
Reply With Quote
Members : ianpac

B15/ Sometimes the leds stop to function. The battery level stop to change. Even if I plug the Flame to the charger, the led do not change to red. Only one workaround, reset the Flame.
Members : thierryb

B16/ Sent some text sms, then do not close the program. Use carmera to take a mms picture and send, then the mms function is freezed and you need to soft reset....
Also, start a clean boot, take mms picture and send, if at the time of you sending mms, you receive a text sms, the Flame is freezed again.....
Members : leochan2005