Remove All Ads from XDA
Find Your Device:
Or Continue to Thread: [Odin][Rom][6/20/11]AC's Alter…
26th May 2011, 02:50 AM |#3  
OP Senior Member
Thanks Meter: 129
To install ODIN packages on your device
1.Download and install drivers on your computer HERE
2. Next you will need to download the Altered Beast zip file from post #1 which will be extracted and placed in the PDA section of ODIN:
3.) You will need to download the ODIN application tool found here ODIN or ODIN MIRROR
4) Extract the Altered Beast zip file to get the .tar.md5 file
5.) If your phone is plugged into your computer, unplug it now.
6.) If your phone is not powered down, power it down now.
7.) Remove battery from phone.
8.) Launch ODIN on PC.
9.) Plug USB cable into phone.
10.) Plug your Droid Charge into the PC via the USB cable that came with your phone.
11.) Press and hold the volume down key until (approx 3 secs) you see a gigantic yellow triangle on your phone, and your phone will be in download mode. The first thin rectangle in the upper left of the ODIN applicate should also turn yellow and identify a com port. You can now release the volume key.

12.) Click on the PDA button in ODIN

Triple check that you pushed the PDA button. Do NOT click the Phone button prior to continuing to step 13. If you choose Phone, you will have bought your Fascinate a one-way ticket to hell.

13.) Find and double click on the Altered Beast .tar.md5 file you downloaded & click the Start button. (This should take approx 3 to 6mins)
14.) Phone will power down when finished.
15.) Close ODIN, remove USB cable from phone, reinsert battery, power on phone and let ROM fully load.
[TIP]It may boot into stock recovery simply Press the home button to reboot
It is also advised to wipe cache partition while you are in recovery [/TIP]

************************************************** ************************************************** **************************************
[INFO]Visual Instructions [/INFO]
First you must download
Odin v1.3

Once odin is downloaded open it, its an executable file so when you open it you will see the following :

Once this is up, do the following
-Remove the battery from your Device
-Plug in the USB cord
-Hold down the Volume Down button until you see a big bright triangle on your screen , underneath it will say Downloading and beneath that it will say Do not turn off target

At this point you will see one of the boxes in the corner turn yellow, letting you know there is a connection, it will look like this

after you are connected you want to hit the PDA button, NEVER PHONE, phone will erase your modem and you will have trouble connecting after that at all.

when you click the PDA button a pop up will appear and you will need to select the file you would like to flash and then click open

now you will see the file appear in the PDA window ,, with connection made and the file in the PDA window, you may now hit Start

Once you hit start this process Should take approx. 5 mins if you are returning to stock . shouldnt take any less time than that and not much more. So dont start freaking out at min 2...(wait till min 7) lol

If you are flashing a Clockworkmod file it should take approx 7seconds.

once it is completed you should see the following window:

Once you have reached this screen it is safe to unplug , put your battery in and boot up..
The Following 12 Users Say Thank You to DroidXcon For This Useful Post: [ View ] Gift DroidXcon Ad-Free