Default [28.07.08] Nike and Neon Radios

As far as camera issues, try changing your radio. I haven't personally had any problems with my camera not working but people in various threads have reported camera problems going away after changing the radio.

Your Device must CID unlocked! You need minimum USPL and HardSPL started! If not ... Flashing stops on 99%!

If you use the wrong Radio with your Rom:

Device can get hot!
Power drain is very high!
Radio stuck, doesnt ring, no Audio, Hardware Problems, ...


Radios they work on HTC Niki

RUU Nike Radio 1.58.11.07

RUU Nike Radio 1.58.13.28S

RUU Nike Radio 1.58.16.27

RUU Nike Radio 1.58.21.23

RUU Nike Radio 1.58.21.23P

RUU Nike Radio 1.58.21.23S Modded (Save Power and have better Network Connection!) "Highly Recommended"

RUU Nike Radio 1.58.25.14P

RUU Nike Radio 1.58.26.20K

RUU Nike Radio 1.64.06.04K

RUU Nike Radio 1.64.08.21K

Radios they work with new Drivers on HTC Niki:

Use Kaiser/Niki eMonster Drivers or from HTC Neon!


Some user Reports problem with her "eMobile S12HT" - NIKI500 - i havent enough infos in the moment! Dont overwrite your Original OS and Radio.

RUU Nike Radio 1.65.14.06K

RUU Nike Radio 1.65.24.36

RUU Nike Radio 1.71.09.01K "Highly Recommended"

Radios they work on HTC Neon:

RUU Neon Radio 1.58.25.17N "Highly Recommended"

RUU Neon Radio 1.65.14.16K

RUU Neon Radio 1.65.16.25K

RUU Neon Radio 1.65.17.56K

RUU Neon Radio 1.65.20.29K

RUU Neon Radio 1.65.24.36

RUU Neon Radio 1.71.09.01K


This are all Radios from different Devices. The QUALCOMM Plattform is very compatible!

Letter Code:

K = comes from Kaiser
S = comes from Sedan
P = comes form Polaris
N = original from Neon
no letter = original from Niki

What does a Radio:

The Radio OS is Linux and run in a signed or crypted EFS. Its the main device driver are only stored and config in it! All functions about Wifi, GPS, 3D Acceleration, Blue Tooth, OS Key Mapping, USB, and Audio are handle in the Radio and NOT in the OS!!! The OS have only bridge Drivers to connect to the Radio. What config is in use, are handle via device PID in the NAND.

This is the reason, why some Radios save Power and other have better signal strange! Signal strange is more Country ID related and power saving more related to Protokoll Version.

If you are stuck in the bootloader, download MTTY, connect via USB (Activ Sync must disabled via USB!!!) and type the Command "boot"

Please tell me ... are HardSPL or USPL installed or do you use SSPL ak JumpSPL? how is the radio rom version, you have try? winxp or vista?