Default Download Repository

Notice: As of December 4, 2013 Hotfile file sharing service has shut down permanently. I have started uploading files to Dev-Host. I have noted below in red which files and sections have not been updated yet. If there is a file you want that still has a Hotfile link, please post a request in the Q&A forum, and I will upload it for you at the earliest convenient time.

A few people may need files for specialized purposes like flashing back the original secondary bootloader or param.lfs, or a stock kernel for removing the yellow warning triangle, etc. I've decided to collect all the downloads relevant to my Guides in one spot.

Download the Odin3 v1.85 package from xda-developers, or another source of your choice. Odin3 v1.82 will also work.

Download and install the latest version of Heimdall Command Line for your operating system from here. (Latest version 1.4.0)

I777 UCKH7 secondary bootloader:
Quote:
There is always some risk involved when flashing bootloaders. Please don't flash this unless you absolutely need to.

This may be required if an I777 leak containing secondary bootloader was flashed. The secondary bootloader in the leaks disables the feature that resets the flash counter when booting download mode with a jig. It also may be required if an I9100 rom containing I9100 secondary bootloader was flashed onto the phone. The I9100 secondary bootloader will make the flash counter say your phone is an I9100. In this case, you would also need to flash the I777 stock param.lfs

Odin3 flashable tar: I777 UCKH7 sbl.tar (Thanks to agh1701)
Use Odin3 v1.85 or v1.82 and put the sbl.tar in the PDA slot.

Heimdall flashable sbl.bin: sbl.bin (Thanks to agh1701)
Use Heimdall at the Command line, put sbl.bin in directory with Heimdall, and type:
Code:
heimdall flash --secondary-boot sbl.bin
You may need to right click and Save Target As
I777 UCKH7 stock param.lfs:
Quote:
There is always some risk involved when flashing param.lfs. Please don't flash this unless you absolutely need to.

This may be required if you get a 'logo_att.jpg' draw failed error during boot.

Odin3 flashable tar of param.lfs: I777 KH7 Stock PARAM.tar (Thanks to Connexion2005 of Mobile Tech Videos)
Use Odin3 v1.85 or v1.82 and put the param.tar in the PDA slot.

Heimdall flashable Stock param.lfs: param.lfs (Thanks to Entropy512 for the stock param.lfs dump)
Use Heimdall at the Command line, put param.lfs in the same directory with Heimdall, and type:
Code:
heimdall flash --param param.lfs
You may need to right click and Save Target As
I777 UCKH7 PIT:
Quote:
There is always some risk involved when re-partitioning. Please don't flash this unless you absolutely need to.

From PAulyhoffman, posted on October 2, 2011: "This is the PIT file for stock galaxy 2 on ATT pulled it from my device via heimdall. It really isn't needed ATM but for the odin users it may come in handy for re-partitions and such."

I777UCKH7.pit: I777UCKH7.pit

You may need to right click and Save Target As
I777 UCKH7 stock kernel:
Quote:
If a custom kernel has been flashed to an I777 phone using Odin3 or Heimdall from a pc, the phone will display a yellow warning triangle on the initial boot screen that also contains the I9100 logo.
It is possible to replace the yellow warning triangle and I9100 logo boot screen with the stock AT&T I777 boot screen by flashing the I777 UCKH7 stock kernel using Odin3 or Heimdall. This will however not reset the flash counter. The only way to reset the flash counter is with a micro usb Jig. See the Original Post of this thread for more information about the Jig.

Odin3 flashable tar: StockKernel-PDA.tar (This tar contains only the kernel. Thanks to Entropy512 for the stock kernel)
Use Odin3 v1.85 or v1.82 and put the StockKernel.tar in the PDA slot.

Heimdall flashable Stock zImage: zImage (Thanks to Entropy512 for the stock kernel)
Use Heimdall at the Command line, put zImage in the same directory with Heimdall, and type:
Code:
heimdall flash --kernel zImage
Now, if you want to install custom software without invoking the warning triangle, follow the Guide, How to Flash Custom Binaries Without Ever Incrementing the Flash counter!!. If you have already installed a custom rom, and you just want to clear the warning triangle and restore a ClockworkMod enabled kernel, then flash the kernel of your choice using one of the procedures in step 3 of the Guide.

You may need to right click and Save Target As
I777UCKH7-CL503881 Stock Binaries:
Quote:
There is always some risk involved when flashing bootloaders, param.lfs and especially PIT. Please don't flash this unless you absolutely need to.

This is the complete stock UCKH7 Binaries downloaded from samfirmware at sammobile.com and packaged as an Odin3 One-Click Downloader. Please note, this package contains the primative bootloader, the secondary bootloader and param.lfs, plus cache.img, factoryfs.img, hidden.img, modem.bin and zImage.

I777UCKH7-CL503881 FULL Odin3 One-click Downloader: I777UCKH7-CL503881-Full.7z (Contains I777UCKH7-CL503881-Full.exe.)

I777UCKH7-CL503881 FULL tar.md5: I777UCKH7-REV02-home-low-CL503881.tar.md5.7z (Contains I777UCKH7-REV02-home-low-CL503881.tar.md5)
NOTE: Odin3 will recognize both tar and tar.md5 files. When using the tar.md5, Odin will verify the md5 sum first before flashing.

Heimdall flashable binaries:
I777UCKH7-CL503881-Parts-NoBL.7z (Contains cache.img, factoryfs.img, hidden.img, modem.bin and zImage.)
I777UCKH7-CL503881-Bootloaders.7z (Contains boot.bin, sbl.bin and param.lfs.)
I777 UCKH7 Return/Unbrick to Stock (or Root) Odin3 One-Click Downloaders
Quote:
Entropy512 prepared an Odin flashable package containing the Stock ROM and another Odin flashable package containing the Stock ROM plus Root. I used the files from these packages to create Odin3 One-click Downloaders for each. These include the modem, but do not contain bootloaders.

Return/Unbrick to Stock Non-Root: I777_UCKH7_OCD_No_BL.7z (This contains the kernel, non-rooted system image, and modem.)

Return/Unbrick to Stock + Root: I777_UCKH7_OCD_Root_No_BL.7z (This contains the kernel, rooted system image, and modem.)

You may need to right click and Save Target As
Entropy512's Original I777 UCKH7 Kernel plus Non-Rooted System Package (Links in this section have not been updated)
Quote:
Entropy512 prepared an Odin flashable package containing the Stock ROM and another Odin flashable package containing the Stock ROM plus Root. The Modem is packaged separately. These do not contain bootloaders.

Kernel plus Non-Rooted System tar: UCKH7_stock_odin_noroot.7z (The tar in this 7z contains only the kernel and non-rooted system image.)
Modem tar: UCKH7_MODEM.tar.7z (The tar in this 7z contains only the modem.)
Flash Separately. Use Odin3 v1.85 or v1.82 and put the Stock-PDA.tar or UCKH7_MODEM.tar in the PDA slot.

Heimdall flashable Stock zImage: zImage
Heimdall flashable Stock non-rooted factoryfs.img: stock_factoryfs.7z (Contains factoryfs.img.)
Heimdall flashable Modem: modem.bin
Use Heimdall at the Command line, put zImage, extracted factoryfs.img, and if used, modem.bin in the same directory with Heimdall.
To flash without the modem type:
Code:
heimdall flash --kernel zImage --factoryfs factoryfs.img
To flash including the modem type:
Code:
heimdall flash --kernel zImage --factoryfs factoryfs.img --modem modem.bin
You may need to right click and Save Target As
Entropy512's Original I777 UCKH7 Kernel + Rooted System Package (Links in this section have not been updated)
Quote:
Entropy512 prepared an Odin flashable package containing the Stock ROM and another Odin flashable package containing the Stock ROM plus Root. The Modem is packaged separately. These do not contain bootloaders.

Kernel plus Rooted System tar: UCKH7_stock_odin.7z (The tar in this 7z contains only the kernel and rooted system image.)
Modem tar: UCKH7_MODEM.tar.7z (The tar in this 7z contains only the modem.)
Flash Separately. Use Odin3 v1.85 or v1.82 and put the Stock-with-root-PDA.tar or UCKH7_MODEM.tar in the PDA slot.

Heimdall flashable Stock zImage: zImage
Heimdall flashable Stock plus Root factoryfs.img: stock_plus_root_factoryfs.7z (Contains factoryfs.img.)
Heimdall flashable Modem: modem.bin
Use Heimdall at the Command line, put zImage, extracted factoryfs.img, and if used, modem.bin in the same directory with Heimdall.
To flash without the modem type:
Code:
heimdall flash --kernel zImage --factoryfs factoryfs.img
To flash including the modem type:
Code:
heimdall flash --kernel zImage --factoryfs factoryfs.img --modem modem.bin
You may need to right click and Save Target As
Entropy512's I777 UCKK6 Kernel + Rooted System Package (Links in this section have not been updated)
Quote:
Entropy512 prepared an Odin flashable package containing the OTA Update UCKK6 Stock ROM plus Root. Download the Modem from the Modem thread. This package does not contain bootloaders.

Kernel plus Rooted System tar: UCKK6_stock_rooted.tar.7z (The tar in this 7z contains zImage, factoryfs.img, hidden.img and cache.img.)
Use Odin3 v1.85 or v1.82 and put the UCKK6_stock_rooted.tar in the PDA slot.

Heimdall flashable files: UCKK6_stock_rooted.7z (Contains stock zImage, factoryfs.img, hidden.img and cache.img.)
Use Heimdall at the Command line, put zImage, factoryfs.img, hidden.img and cache.img in the same directory with Heimdall.
To flash type:
Code:
heimdall flash --kernel zImage --factoryfs factoryfs.img --cache cache.img --hidden hidden.img
You may need to right click and Save Target As
I777UCLE5 Stock Binaries (Android 4.0.3 Ice Cream Sandwich) (The One-click Downloader link in this section has not been updated):
Quote:
There is always some risk involved when flashing bootloaders. Please don't flash this unless you absolutely need to.

The AT&T ICS leaks leading up to this version, UCLD3 and UCLD4 had a very serious flaw in the kernel which caused several people with the I777 to lose their device due to eMMC chip damage. The distribution of that flawed kernel was fairly widespread, and affected a number of different devices. Since the kernel source code for the current official AT&T UCLE5 has not been released yet, it is not possible to confirm that the kernel supplied with the UCLE5 release is free of this serious issue. Therefore, it would be advisable to either not run this firmware, or use a modified, rooted version in which the kernel is replaced with a known safe kernel. Such a modified, rooted version can be downloaded from the Android Development forum for this phone. It is unknown at this time if the bone stock installation can be rooted.

This is the complete stock UCLE5 Binaries downloaded from samfirmware at sammobile.com. Please note, this package contains boot.bin, plus cache.img, factoryfs.img, hidden.img, modem.bin and zImage.
I777UCLE5 Full Odin Flashable tar: I777UCLE5_I777ATTLE5_I777UCLE5_HOME.tar.md5.7z (Contains I777UCLE5_I777ATTLE5_I777UCLE5_HOME.tar.md5)
(md5: 22cd4d5e80e1e79d68d88cc4607cafcc)
NOTE: Odin3 will recognize both tar and tar.md5 files. When using the tar.md5, Odin will verify the md5 sum first before flashing.

This is the stock UCLE5 Binaries downloaded from samfirmware at sammobile.com and packaged as an Odin3 One-Click Downloader. Please note, boot.bin has been removed from this package. Contains cache.img, factoryfs.img, hidden.img, modem.bin and zImage.
I777UCLE5 Odin3 One-click Downloader: I777UCLE5 OCD No BL.7z (Contains I777UCLE5 OCD No BL.exe)
(md5: 37dd392fe8ca47fc75cb82d378df5b92)
I777UCLL6 Stock Binaries (Android 4.0.4 Ice Cream Sandwich) (The One-click Downloader link in this section has not been updated):
Quote:
There is always some risk involved when flashing bootloaders. Please don't flash this unless you absolutely need to.

The AT&T ICS leaks leading up to the first official ICS release, UCLE5, had a very serious flaw in the kernel which caused several people with the I777 to lose their device due to eMMC chip damage. The distribution of that flawed kernel was fairly widespread, and affected a number of different devices. There were very few confirmed cases of eMMC damage with the UCLE5 release, but evidence indicates it may still have contained the flaw in some form. The current UCLL6 kernel appearantly fixes some issues that appeared in the previous 4.0.4 release, such as the sleep of death issue. It is unknown if the original eMMC cap erase flaw has been completely removed from this release. Therefore, it may be advisable to either not run this firmware, or use a modified, rooted version in which the kernel is replaced with a known safe kernel. Such a modified, rooted version can be downloaded from the Android Development forum for this phone. It is unknown at this time if the bone stock installation can be rooted.

This is the complete stock UCLL6 Binaries downloaded from samfirmware at sammobile.com. Please note, this package contains boot.bin, plus cache.img, factoryfs.img, hidden.img, modem.bin and zImage.
I777UCLL6 Full Odin Flashable tar: I777UCLL6_I777ATTLL6_I777UCLL6_HOME.tar.md5.7z (Contains I777UCLL6_I777ATTLL6_I777UCLL6_HOME.tar.md5)
(md5: 01da898a3b9191f037e6d383720118d7)
NOTE: Odin3 will recognize both tar and tar.md5 files. When using the tar.md5, Odin will verify the md5 sum first before flashing.

This is the stock UCLL6 Binaries downloaded from samfirmware at sammobile.com and packaged as an Odin3 One-Click Downloader. Please note, boot.bin has been removed from this package. Contains cache.img, factoryfs.img, hidden.img, modem.bin and zImage.
I777UCLL6 Odin3 One-click Downloader: I777UCLL6 OCD No BL.7z (Contains I777UCLL6 OCD No BL.exe)
(md5: 5cd8eac74602d9cdfcec7e4da86bd60d)
I777UCMD8 Stock Binaries (Android 4.1.2 Jelly Bean):
Quote:
There is always some risk involved when flashing bootloaders and Param.lfs. Please don't flash this unless you absolutely need to.

This is the complete stock UCMD8 Binaries downloaded from samfirmware at sammobile.com. Please note, this package contains boot.bin, sbl.bin and param.lfs, plus cache.img, factoryfs.img, hidden.img, modem.bin and zImage.
I777UCMD8 Full Odin Flashable tar: I777UCMD8_I777ATTMD8_I777UCMD8_HOME.tar.md5.7z 427.02 MB (Contains I777UCMD8_I777ATTMD8_I777UCMD8_HOME.tar.md5)
(md5: 307cc8fcbb8f220d3ae75d387569da40)
AJK v4.9 MicSwap kernel:
Quote:
The dev-host download for this file that is linked in AJ Newkirk's kernel thread contains a corrupt version of this file. This download is a working version that I downloaded in October of 2013.
AJK v4.9 MicSwap: AJK v4.9 MicSwap 7.77 MB (8,144,957 bytes)
(md5: 6478bea9d4b3662c29e431946fc64415)