---

Version V3 released
http://www.multiupload.com/MQ6V790WUX
V3
-- In this version I simplified getting the Serial number of your tablet making it easier to flash. Please read the instructions in the readme.pdf. Many people were struggling trying to load ADB drivers and the ADB tools which the instructions said you needed to load first so you could get your serial number. The flashing tool actually loads the drivers and tools therefore, all you have to do is run the test.cmd after the drivers are loaded to get the serial number. This is now documented better, also you should not have to save the serial number in the CPUID.txt file, so I removed it.

-- I fixed the checksums during the flashing therefore you do not need to boot to recovery mode and fix them using CWM. Now your tablet will just reboot correctly after the flash.

-- I added into the flash, Busybox and SU tools for you. No need to add them later.

Bottom-line, if you installed V2 there is nothing new. V3 is just for those that struggled getting ADB working for their serial number and those that struggled installing the tools. Also, many people 'freaked' when their tablet didn't boot after the flash, because they did not read. Or they struggled with pushing the correct buttons to get into recovery mode to fix the checksums.

Enjoy,
TD