clean install guide
Since i see many ppl with weird bugs and things that dont work, i asked several ppl to send me a pm of that troubles getting their installation working properly...
Plenty of ppl sent me a message so i figured i make a dummy proof guide. and if you still get bugs, wlods or other weirdness, please, send me your X10 and go buy an i-phone
here goes:
No worries, glad i can offer assistance!
Flashing FeraVolts rom:
Before flashing make sure you back up your contacts, and then backup your sd-card to your hard drive.
1. Make sure you download the following files:
X10_2.3.3_Th_kernel-n1.1-BootManager-v2.0.ftf
X10_2.3.3_Th_kernel-n1.1_wifi.zip
FeraLab v13.4 Rom file (zip)
Fix.zip
2. First off, make sure that all you wanted to back up is backup and stored on your pc and not on your sd card anymore.
3. Use the flashtool to flash the Th_kernel-n1.1-Bootmanager-v2.0.ftf
4. when this is done reboot the phone. After reboot again, but then into xrecovery
- Within Xrecovery: –
5. Do a factory wipe (full wipe)
6. Format System
7. Format Cache
8. Format Data
9. Format SDCARD
10. Clear dalvik cashe
11. Fix permissions
12. Mount USB
13. Copy a folder with the following files onto the sdcard:
X10_2.3.3_Th_kernel-n1.1_wifi.zip
FeraLab v13.4 Rom file (zip)
Fix.zip
14. Go back to main menu, flash custom zip file
15. Select Feravolts rom file. Flashing this will take a while
16. After it is finished, select flash custom zip file
17. Select Fix.zip, wait till it is finished, which is rather fast.
18. Go to main menu and reboot. First boot will take a while so be patient.
- After flashing: -
19. When boot is finished, enter simcard pincode and walk thru the setup,
BUT DO NOT ENTER ANY ACCOUNT NAMES OR PASSWORDS JUST YET, just skip account information, and
SELECT NO FOR SYNCHRONIZATION.
20. Go to settings and set the screen time out from 30 seconds to 10 minutes. (you can put this back later)
21. Reboot. On second boot, just let your phone be, for about 5 minutes, smoke some weed and make some coffee.
22. After about 5 to 10 minutes, reboot phone into xrecovery.
23. Flash custom zip file and select the
Th_kernel wifi module. When it is done reboot
24. your phone is nearly epic now.
25. when boot is finished go to Smanager, select the
~FeraLab~ folder, then
Scripts folder
Select the Extra_RAM_Swap.sh file
26 Select the
SU and
Boot icons and select RUN. Let the script run. When it is finished, select close.
27. reboot.
28. make your accounts, and connect your wifi to do your stuff.
29. Enjoy this kickass Rom
30. Make a donation to Fera is you can.
31. And thank author if this install setup has helped you!
I have flashed this way a few times, just to see if this way was without errors or weird bugs. This method of flashing worked for me every time. Hope it works for you aswell. Market works, camera works, home button works, Google maps works, basically everything works.
PS... I couldnt care less if Swiftkey doesnt work. I dont use it, so dont ask!