Or Continue to Thread: [HARDWARE FAULT] WiFi antenna …
Find Your Device:
8th June 2012, 01:27 PM   |  #232  
Junior Member
Thanks Meter: 2
 
4 posts
Join Date:Joined: Dec 2008
Thumbs up after two nails up and also two metal layers upper, 0-1 poor wifi >> 3-4 full wifi
thank you very much for your topic....

my one x had also poor wifi.... when i squezed it would be good.

then i took all risks because i see it is simple.. i saw there is no screws open. just take out the main unit from plastic back case... anyway.. I opened my one x gently... i saw the culprit... first try i made this 2 metal nails up about 0,5 mm bu i saw if i trid more it would be dangerous because they are very small nails, and fragile. ..first trying ( 0,5 mm up nails) was not succesful. poor wifi continued.
i tried again, this time i add two faced glued slim flaster under the metal layer. i had made metal nails up but it did not enough... so when i made metal layers a bit upper, too , after closing wifi connects 3-4 instead of 0-1 without any squiezing...
The Following User Says Thank You to cipcivil For This Useful Post: [ View ]