Or Continue to Thread: [APP][2.2+] DigiControl/DigiSS…
Find Your Device:
24th July 2012, 10:26 PM   |  #12  
OP Junior Member
Thanks Meter: 10
 
19 posts
Join Date:Joined: Jan 2008
1. open DigiSSHD info tab. Look at interfaces block. USB interface must be there.
2. start DigiSSHD
3. open any terminal on phone, enter netstat -al
example from my phone
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 127.0.0.1:7777 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:7203 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:2222 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:32500 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:43866 127.0.0.1:7777 ESTABLISHED
tcp 0 0 10.255.255.247:47225 213.75.57.103:443 ESTABLISHED
tcp 0 0 127.0.0.1:7777 127.0.0.1:43818 ESTABLISHED
tcp 0 0 127.0.0.1:7777 127.0.0.1:33561 ESTABLISHED
tcp 0 0 127.0.0.1:7777 127.0.0.1:43819 ESTABLISHED
tcp 0 0 127.0.0.1:43818 127.0.0.1:7777 ESTABLISHED
tcp 0 0 10.255.255.247:2222 10.255.255.250:47123 ESTABLISHED
tcp 0 0 127.0.0.1:7777 127.0.0.1:43866 ESTABLISHED
tcp 0 0 127.0.0.1:43819 127.0.0.1:7777 ESTABLISHED
tcp6 0 1 ::ffff:10.255.255.247:46121 ::ffff:173.194.32.32:80 CLOSE_WAIT
tcp6 0 0 ::ffff:127.0.0.1:33561 ::ffff:127.0.0.1:7777 ESTABLISHED
tcp6 0 1 ::ffff:10.255.255.247:51556 ::ffff:173.194.32.48:443 CLOSE_WAIT
tcp6 0 1 ::ffff:10.255.255.247:37148 ::ffff:173.194.32.0:443 CLOSE_WAIT
tcp6 0 0 ::ffff:10.255.255.247:35515 ::ffff:173.194.69.188:5228 ESTABLISHED
tcp6 0 1 ::ffff:10.255.255.247:48747 ::ffff:173.194.32.8:443 CLOSE_WAIT
tcp6 0 1 ::ffff:10.255.255.247:43505 ::ffff:173.194.32.18:443 CLOSE_WAIT

Red string indicate that you may connect to tcp port 2222 on any available interface (0.0.0.0)
If something lost send me message via PM, we will troubleshoot your connection

Quote:
Originally Posted by MountainX

Hi. Great app! Thanks for your work on this! Is there a tutorial for how to connect using USB? My phone is a Galaxy Nexus (running Cyanogenmod 9 RC2). As you know, the Galaxy Nexus uses MTP instead of USB Mass Storage. MTP does not work well for me. I would prefer to use SFTP over USB. I believe DigiSSHD allows this, but I need some step by step instructions. So far, I have not figured out how to make it work.

One solution I am thinking of is to use EasyTether. At the moment, my phone is plugged into my Linux box via USB and EasyTether is connected. I can ping the phone on 192.168.117.1. What are the next steps?

If not using Easy Tether, what other ways can I connect via SFTP and USB to my Galaxy Nexus? Thank you for your work on this very important app!