[ROOT][2.1+][V6.1.0] OnePowerGuard is best Battery Saver

Search This thread

crzr

Senior Member
Oct 17, 2012
205
51
Asunción
right now is the truly battery saver, and when you add network handling this app will be the best ever! :D

Sent from my GT-I9100G using xda app-developers app
 
  • Like
Reactions: onexuan

Magpir

Senior Member
Jul 4, 2011
4,169
416
i dont exaclty know how these power save modes work

any explaination on what each of the modes does will be fine
 

bratusm

Senior Member
Nov 19, 2012
545
244
Ljubljana
Does not auto start

I have HTC ONE V primoU, rom: CM10, Kernel: Hellboy.

Everything running well, but app does not auto start after rebooting. Yes, I did enable that in settings...

Any Idea? :confused:
 

Magpir

Senior Member
Jul 4, 2011
4,169
416
i dont understand what this app does actually, or it just play around with cpu settings?

or does it disable wifi, bluetooth, data ect as part of each of the modes
 

onexuan

Senior Member
Jun 1, 2010
1,224
995
www.onexuan.com
i dont understand what this app does actually, or it just play around with cpu settings?

or does it disable wifi, bluetooth, data ect as part of each of the modes

1. optimize kernel parameter, /proc/sys/kernel/msgmni /proc/sys/kernel/msgmax;
2. optimize vm /proc/sys/vm/dirty_writeback_centisecs
3. optimize kernel sleep
4. optimize kernel /proc/sys/net/ipv4/
5. optimize IO cfq, bfq, noop
6. optimize sdcard read/write
7. optimize memory "safe chean"
 

onexuan

Senior Member
Jun 1, 2010
1,224
995
www.onexuan.com
Yes, 2.2, downloaded here...

Do you turn on automatically start in the settings?

attachment.php
 
  • Like
Reactions: bratusm

Magpir

Senior Member
Jul 4, 2011
4,169
416
i suggest u all stop using thsihiss app. it seems to mess around with the kernel

if u are runnig a custom kernel like cm 10.1 , most like lt it is being optimised for battery life and also comes with the built in default cpu governor which is already good enough

btw th ebiggest battery drainers are actually sensors , radios ect.. so just leave the kernel alone if u are using cm 10.1

this way u have a rom of your choice on yr device intended to work as it should

i am using this app now. it works great , at least does not modifies anything . but just disable /enables radios, signals and hardware ect through triggers
i beleive this actualyl doesnt harm yr device

for the app its called automatedit found in the play store
http://xdaforums.com/showthread.php?t=1123423&page=119
 
Last edited:
  • Like
Reactions: onexuan

bratusm

Senior Member
Nov 19, 2012
545
244
Ljubljana
@Magpir

Why? :confused:
Because you said so? :rolleyes:
When you root your phone, you automatically mess. Not just with kernel, also with recovery and rom... :)
So, if this app does what it says, what's wrong? If you don't like it, don't use it! Flash your kernel again, if you think this app messed with it and you may go... Wherever you like :cool:
Just don't praise your app over that one, it's not fair...
 
Last edited:
  • Like
Reactions: Herone and onexuan

onexuan

Senior Member
Jun 1, 2010
1,224
995
www.onexuan.com
@Magpir

Why? :confused:
Because you said so? :rolleyes:
When you root your phone, you automatically mess. Not just with kernel, also with recovery and rom... :)
So, if this app does what it says, what's wrong? If you don't like it, don't use it! Flash your kernel again, if you think this app messed with it and you may go... Wherever you like :cool:
Just don't praise your app over that one, it's not fair...

Thank bratusm. You're right.

For example: when you buy two different phones, whose kernel are not the same. Google Android also changes the kernel. Every producers are revising its own kernel.
If you are a geek, you can modify some of the initialization files and put them into init.d folder. Does this not modify the kernel?
 
Last edited:

bratusm

Senior Member
Nov 19, 2012
545
244
Ljubljana
[/COLOR]
Thank bratusm. You're right.

For example: when you buy two different phones, whose kernel are not the same. Google Android also changes the kernel. Every producers are revising its own kernel.
If you are a geek, you can modify some of the initialization files and put them into init.d folder. Does this not modify the kernel?
You're right, of course... :D
Magpir acted just like a child, 8-10 years old - well, at least, his post is childish... ;)
Just keep up your good work, you rule! :victory:
 
Last edited:

onexuan

Senior Member
Jun 1, 2010
1,224
995
www.onexuan.com
i suggest u all stop using thsihiss app. it seems to mess around with the kernel

if u are runnig a custom kernel like cm 10.1 , most like lt it is being optimised for battery life and also comes with the built in default cpu governor which is already good enough

btw th ebiggest battery drainers are actually sensors , radios ect.. so just leave the kernel alone if u are using cm 10.1

this way u have a rom of your choice on yr device intended to work as it should

i am using this app now. it works great , at least does not modifies anything . but just disable /enables radios, signals and hardware ect through triggers
i beleive this actualyl doesnt harm yr device

for the app its called automatedit found in the play store
http://xdaforums.com/showthread.php?t=1123423&page=119

Magpir, Do not worry about this app!
 

fcjr77

Senior Member
Mar 11, 2011
91
13
I love this app. Without it my battery was draining horribly, but I now I get double the amount of battery life. I always look forward to your up dates, so keep up the good work.
 
  • Like
Reactions: onexuan

onexuan

Senior Member
Jun 1, 2010
1,224
995
www.onexuan.com
I love this app. Without it my battery was draining horribly, but I now I get double the amount of battery life. I always look forward to your up dates, so keep up the good work.

Great! Thanks for your support! I also refresh this post every day. To see if there are comments. My English is not very good, so sometimes without clear explanation.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 157
    One Power Guard is one and only kernel-level power-saving and unique battery protection app, more than 100,000 people are using it, optimizes your system by the kernel on your standby and reduces 70%~80% Power consumption.





    Onexuan.com mainly focus on creating polished, pixel-perfect, smooth and responsive applications helping end users achieve their goals painlessly and, more importantly, as quickly as possible.

    Our Blog: http://www.onexuan.com/blog
    How to use One Power Guard http://onexuan.com/blog/help/
    Pro Official Website: http://www.opgpro.com
    Now only OnePowerGuard Pro help info, but it is the same with One Power Guard, we are developing OnePowerGuard Pro and ready to release it

    onepowerguard.png


    Enjoy your success

    Note: How to use Battery Doctor on Android 4.4 KitKat
    Android 4.4_r1 removed the possibility for apps to request for the BATTERY_INFO permission, This is the commit https://android.googlesource.com/platform/frameworks/base/+/3714141d287c965ea3451831dd5167f63f8db87b%5E%21/
    The reason (issue mentioned) for the commit is unknown.
    This permission and the access to batterystats - formerly known as batteryinfo - service is vital for use cases (and apps) dealing with analysing awake and wakeup causes (battery drainers) as this services gives access to partial wakelocks and alarms.

    I would like to request a rollback of the mentioned commit. See issue 61975

    Here is a Solution from XDA forum by Xposed and download Version 5.1.0, Android 4.3 or older is well, you can flash older ROM

    Enable BATTERY_STATS for KitKat
    http://repo.xposed.info/module/com.gsamlabs.xposed.mods.enablebatterystatspermission
    17
    Share your story with everyone! You can send me your story.
    Share Story 1 by Hansen:
    Hey man. I have some good feedback for you. After you made some changes to your app my battery life is longer. I see a huge improvement, my battery has now power to a whole day even if I play games and do some other stuff. Before that my battery was drained an hour before I went to bed. Now I have about 10-30% when I go to sleep AND now it's colder here in Denmark. Very cold. You know... batteries use more power when it's cold so that's a good thing, even if it's colder my battery lasts longer.

    Share Story 2 by dontbelive
    Heey all ,,after i test this app on my mothers xperia x10 (2.3.4 custom rom) and m fathers lg 2x speed (4.0.4 stock pre-rooted rom) this apps works really great up to 1,5 - 2 days :D
    My battery problem is gone since i use this app

    (i dont like battery saving apps because they draining my battery more than.before but this is really.amazing).
    This app works only with root this tweaks the kernel ,wireless etc.. for each mode

    OP from http://xdaforums.com/showpost.php?p=35278606&postcount=1

    Share Story 3 by bratusm

    I started in the evening, with fully charged battery, at 22.00. I checked battery status (%) next morning at 08.00

    - without One Power Guard 2.2: 78%
    - with One Power Guard 2.2: 97%

    No need to say more... One Power Guard 2.2, at least for my phone, is working excellent!!!

    OP from http://xdaforums.com/showpost.php?p=35716446&postcount=343

    Share Story 4 by neoyoli

    Your scroll cache hack definitely
    And maybe the One Power Guard app by onexuan, it is really really good. I don't know if it has anything to do with it, but since I installed it and set the CPU speed to min. 120MHz, max. 756MHz, the game lag with the oc kernel described in the Nameless thread lately is gone.
    I'll ask einstein.frat about it btw, maybe it helps to have a flawless oc kernel by default.

    OP from http://xdaforums.com/showpost.php?p=36676448&postcount=72

    Share Story 5 by jfriend33

    Getting crazy battery life using juice defender free paired with one power guard. My phone on stock extended was able to last 26 hours with 2 hours of screen use. Stock kernel

    OP from http://xdaforums.com/showpost.php?p=37408087&postcount=1516

    Share Story 6 by kewkie

    I'm using "One power guard" atm - this app is really awesome and helps alot against battery draining - i like this, plus Supercharge, DOMscript and battery calibration - its really nice

    OP from http://xdaforums.com/showpost.php?p=36719087&postcount=11

    Share Story 7 by takumibunta

    I found the second solution, which is using the ONE POWER GUARD. Now, the battery life IMPROVES EVEN MORE! Now when I wake up to check my device, a whole night sleep is just draining 2-3% the most!

    OP from http://xdaforums.com/showpost.php?p=37347399&postcount=2

    Share Story 8 by roonie

    I found a difference only after using for 1 week..
    Before using one power guard , battery was draining with 10% an hour during night(even when i dont use also) (So if at night its full charge at 6.00am it will be 40% charge left)
    After using one power guard for one week , battery backup increased with more than 50%...(So at night if its full charge at 6.00am it was above 80% like that)

    OP from http://xdaforums.com/showpost.php?p=37329812&postcount=61

    Share Story 9 by Shawnki91

    Install "One Power Guard" (https://play.google.com/store/apps/details?id=com.onexuan.battery&hl=en) and use the "AI" mode. It does not affect radio use, but rather optimizes the CPU governor in order to save power depending on what you are using this for. With bluetooth turned on for at least 6 hours a day, email, txting, web browsing and some video, my streak last me throughout the whole day, and I usually have about 20%-25% left by the time i get home at night--try it out!

    OP from http://xdaforums.com/showpost.php?p=38369913&postcount=5992

    Share Story 10 by uluvali

    Installing it now. I have been having horrible battery life recently. 2-3 hrs per battery with everything off (wifi, bluetooth, 3g, gps,etc...). I am currently looking at the battery usage screen. After 35m 31s, I have 59% battery left - (cell standby 39%,phone idle 31%, android system 17%, display 15%)
    The screen is warm to the touch. I don't think that I could have 3 batteries go bad simultaneous? I haven't changed any settings recently. Im on the latest DSC 2.3. I did have a problem similar to this previously but it was a busybox upgrade that caused it. I downgraded and everything went back to normal.

    I will let you know if "One Power Guard" solves my battery problem. Thanks

    OP from http://xdaforums.com/showpost.php?p=38407022&postcount=5996

    Share Story 11 by F3niX

    JB - CM 10.1 2.4 with new Kernel and One Power Guard Installed - No lags using CFQ Governor and 1.1Ghz OC, No Call Drops- 1.5-2 days tops

    OP from http://xdaforums.com/showpost.php?p=37325889&postcount=2

    Share Story 12 by eddy0090

    I started using one power guard and I believe it really works. Also I found that turning off Gps while not using apps that need it increases battery life by a lot.

    OP from http://xdaforums.com/showpost.php?p=37325889&postcount=2

    Share Story 13 by akk29

    I have been using an app called One Power Guard which does seem to improve battery life mainly during standby without any discernible decrease in performance. This app causes various system and kernel tweaks,

    Disabling data connections etc is well known to help improve battery life but I have also found a big difference by turing off Use Wireless networks in the Location and Security Settings.

    A second battery with this ROM is recommended and I am very happy with the Mugen 1800mah battery.

    OP from http://xdaforums.com/showpost.php?p=38161817&postcount=1

    Share Story 14 by whoamigriffiths

    neoyoli put me onto this App which I'm really starting to like ----- One Power Guard

    OP from http://xdaforums.com/showpost.php?p=36753783&postcount=5

    Share Story 15 by takumibunta

    For the battery drain issue, I used One Power Guard, which I tested before, it does reduce the power usage (Got a very good result during deep sleep, and daily usage... usually without using it, my battery drains at least 7% after whole night, while using it, my battery only drains about 3% the most!)

    OP from http://xdaforums.com/showpost.php?p=37345197&postcount=6

    Share Story 16 by TheRedHunter

    One power guard should be added too. Also you should check lighting browser, fastest browser for our phone and it has only 200 kb.

    OP from http://xdaforums.com/showpost.php?p=37791756&postcount=2

    Share Story 17 by -woczarder-

    "one power guard" <-- with this app my battery life is awesome (up to 1,5 day)

    OP from http://xdaforums.com/showpost.php?p=38346358&postcount=6

    Share Story 18 by kyaiyalah

    I Use One Power Guard, and i think it should be one of the best app on the market,,,

    OP from http://xdaforums.com/showpost.php?p=38348887&postcount=7

    Share Story 19 by @non4

    I have now found I get the same results from one power guard gaming preset, should've kept my money for a beer! :p

    OP from http://xdaforums.com/showpost.php?p=38562218&postcount=16

    Share Story 20 by takumibunta

    First option, I suggest you to use the ONE POWER GUARD app... The latest version is stable and there is a battery calibration function in the options.

    Second option, download 'battery calibration' in the Google Play. Just for simple battery calibration only...

    I STILL RECOMMEND ONE POWER GUARD. IT CAN OPTIMIZE YOUR KERNEL, ROM, WI-FI, 3G AND I/O SCHEDULER SO THAT TO MAINTAIN BATTERY LIFE. IT'S A NICE TRY.

    Here is the step (The developer recommend us to follow these steps but not necessary)

    THE FIRST AND SECOND STEP IS THE BATTERY CALIBRATION PROCESS

    1. CHARGE your phone to 100%
    2. Click on battery calibration button first (battery calibration app or ONE POWER GUARD app), then only plug off your charger.

    OP from http://xdaforums.com/showpost.php?p=37622260&postcount=18

    Share Story 21 by Sabbit

    to add to mihirengg19's list, i recommend One power guard for your battery

    OP from http://xdaforums.com/showpost.php?p=38147803&postcount=3
    -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    Old version to discuss from http://xdaforums.com/showpost.php?p=36428994&postcount=5

    The new post feedback problem here
    Please tell your problems, rather than Silence.


    Please describe the problem in detail. Be sure to include:
    - This App Version.
    - Steps to reproduce the problem.
    - What happened.
    - What you think the correct behavior should be.
    - Log files to better



    Version History: http://www.onexuan.com/battery/versionupdate.txt


    This is a stable and important version:
    V3.9.0
    1. Enhance stability and add a new feature to set wifi scan interval
    2. Fix this floating window bug and add a new option.
    11
    Here is FAQ

    Here is FAQ
    Q: How to fix "initializing" load? Does it not work?
    A: Just install superSU and uninstall superuser,Everything will be OK.

    Please explain all the permissions required by this app
    PRECISE LOCATION (GPS AND NETWORK-BASED) --- To allow this app to swtich location sources such as GPS and WiFi;
    FULL NETWORK ACCESS --- To allow this app update from the server and upload the exception log of this app
    PAIR WITH BLUETOOTH DEVICES -- Switch Bluetooth
    PHONE CALLS READ PHONE STATUS AND IDENTITY --- To allow this app to close the floating window when a call comes in
    STORAGE - To allow this app to write a error log to the sdcard
    CHANGE NETWORK CONNECTIVITY - To allow this app to toggle the switch such as WiFi, Mobile Data, WiFi Hotspots, etc;
    RETRIEVE RUNNING APPS --- To allow this app to kill processes and count the drain apps;
    DRAW OVER OTHER APPS --- To allow this app to show a floating window and draw over other app;
    CONNECT AND DISCONNECT FROM WI-FI --- To allow this app to toggle WiFi;
    MODIFY SYSTEM SETTINGS --- To allow this app to change settings such as brightness, ring, airphane, screen timeout, etc;
    ACCESS BLUETOOTH SETTINGS --- To allow this app to toggle Bluetooth and save Bluetooth settings;
    CHANGE/INTERCEPT NETWORK SETTINGS AND TRAFFIC -- To allow to get the network traffic and show the network speed at the floating window
    TOGGLE SYNC ON AND OFF --- To allow this app to switch the sync settings;
    CONTROL VIBRATION --- To allow this app to control or switch vibration;
    VIEW WI-FI CONNECTIONS --- To allow this app to switch WiFi;
    RUN AT STARTUP --- To allow this app to auto run at rebboot and protect your the battery life;
    CHANGE BACKGROUND DATA USAGE SETTING --- To allow this app to toggle the background settings;
    CLOSE OTHER APPS/FORCE STOP OTHER APPS --- To allow this app to kill the consume processes;
    READ SYNC SETTINGS --- To allow this app to get sync status for switching the sync settings;
    READ BATTERY STATISTICS --- To allow this app to get battery statistics;
    MODIFY SECURE SYSTEM SETTINGS --- To allow this app to change settings such as brightness, ring, airphane, screen timeout, etc;
    CONNECT AND DISCONNECT FROM WIMAX/CHANGE WIMAX STATE --- To allow this app to switch Wimax, but now this app don't support this feature;

    Q:How to fix this app gets stuck at "Initializing"?
    A:If this app gets stuck at "Initializing", please check this problem with SuperSU or Superuser not allowing it root access.

    Q:Why the phone slow after I set?
    A:I want to talk about my story, last night, a user looked for me, he said that his issue about installing the 2.1 version.he said his device lagged in the standby mode. I told that we work together to solve this problem. After work, I went back to my dorm. I started to write a test interface for him. 1.5 hours later, we started testing. He began to test my ten steps. Finally, each step ran well. But the issue had not yet been found. I let him try again AI mode.his device lagged.Because his device does not support to adjust the CPU. So my judgment is because IO schedule issue, he set the "CFQ", I let him try to change IO. (His Rom Only support CFQ and Noop). He changed to "Noop", All things became perfect. Finally solve the issue.

    Final conclusion: Try to change some settings until it is the best.

    Q:How to set?
    A:The bloger write an article about One Power Guard, you can read it. http://pinoyflare.blogspot.com/2013/01/one-power-battery-guard-100-working.html


    Q:Does this application modify the kernel? I am very worried about this.
    A:Yes. This app modifies kernel parameters, Do not worry. For example: when you buy two different phones, whose kernel are not the same. Google Android also changes the kernel. Every producers are revising its own kernel.
    If you are a geek, you can modify some of the initialization files and put them into init.d folder. Does this not modify the kernel?
    When you root your phone, You have already modified your kernel.

    If you are worried about this, you can uninstall this app and reboot your phone.


    Q:Why display the maximum CPU Freq in the change mode interface?
    A:This app get two file /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq and /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq value. If their value are max, will be displayed in UI.

    Q:Why not support CPU frequency settings
    A:This app get two file /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq and /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq value. If their are missing, will not support displayed.
    You need to find a cause in your kernel

    Q:Why do I recommend ondemand?
    A:Because in my experience, it's the best. I test all Policy.If there is a better policy, please give me feedback.

    Q:Why is there no “ondemand” “powersave” Option?
    A:Because the kernel does not support.

    What is a safe clean?
    Android has a app process management mechanisms, when a process is killed by third-party applications, the android system will determine whether the process will be run again, if it is, the process will run, the kill process will repeat thereby creating an infinite loop, resulting in increased power consumption. Therefore, you should consider uninstalling third-party process management software.
    attachment.php

    How to turn off wifi tips in the settings

    attachment.php

    Q:How to change the notification bar style?
    A:Settings -> Notification Style

    attachment.php

    Q:How to turn off ring tips?
    A:Settings -> Ringtone Tips

    attachment.php

    Q:How to auto start this app when your phone reboot?
    A:Settings -> Reboot Protection

    attachment.php

    Q:Often forget to turn off the WIFI, how to do?
    A:Settings -> Wifi Tips

    attachment.php

    Q:How to display network traffic?
    A:
    1、Settings -> The Floatation Window Info -> Internet Speed
    2、Settings -> The Floatation Window -> Always top


    attachment.php

    Q:How to turn off optimization tips,It often bothers me?
    A:Settings -> Optimization Tips

    attachment.php

    Q:Why I can't find the battery calibration?
    A:You need turn on a mode. and then go to the settings interface, you will see the battery calibration

    attachment.php

    Q:Some moto phones show battery 10%?
    A:Settings - > other

    attachment.php

    Q:How to turn off the app?
    A:You can stop it from management applications interface.


    attachment.php

    Q:Switching to another profile?
    A:If you want to switch another mode.


    attachment.php

    A:If you want to change profile in the same mode or save profile.

    attachment.php

    Q:How to view the state of the CPU?
    A:The statistics interface -> Menu -> CPU

    attachment.php


    attachment.php

    Q:How do I view the CPU load?
    A:The statistics interface -> Menu -> Statistics

    attachment.php
    6
    The 2.6 Version Update

    Everyone, The 2.6 Version Update, it fixs an important issue.
    1. Fix without changing the profile mode using the floatation window
    2. Reduce the application memory RAM
    3. Fix Seekbar UI
    4. Re-optimize the icon cache
    5. Fix Dialog and Popupwindow bug
    6. Fix to get battery plug bug
    7. Add wake up statistics(Uncharge and charge)
    8. Fix some bug


    Update from Google Play, XDA, Official Website, need to wait for Thirty minutes from Google Play
    5
    The First Stable Version 2.4 Updated

    The First Stable Version 2.4 Updated
    2.4 Version - I think this version is a important and the first stable version.
    1. Fix running sync interface bug in Android 4.1 or the newer version
    2. Fix unable to stop service in the settings
    3. Add a tip without SIM Card in Android 3.0 or the newer version
    4. Optimize progress When click a mode
    5. Optimize the notification bar
    6. Optimize the CPU processing
    7. Add three kinds of notification style
    8. Add Battery backup feature
    9. Fix unable to get superuser permission when battery service is killed
    10. Fix Battery calibration sometimes disappearing issue
    11. Remove some useless permission
    12. Support for Traditional Chinese
    13. Fix many bug

    The XDA Version 2.4 can be downloaded, the Google Play Version need to wait Google sync. Maybe wait for 30 minutes.