[KERNEL|12|05|13][teaMSeven|V.4[2GHz|VC|BLINKBUTTONS|H2W|LINARO-o3|FULL-OTG]

Search This thread

LorD ClockaN

Inactive Recognized Developer
Sep 1, 2008
14,106
28,537
Veli Losinj
www.losinj.com
Small suggestion:
Blinking Softkeys works fine, but i was hoping they will blink when my One is charging, but they dont.
I think it´s because the LED and Sofkeys get the command to blink from LED and this doesnt blink when charging, maybe u can figure smth out for blinking Softkeys when charging?

LG, Helmut

Blinking notif LED while charging would be nice :p
 

Tetsumi06

Senior Member
Dec 17, 2012
634
164
Bangor
Could we get double tap 2 wake to the next version?:)

Sent from my HTC One using Tapatalk 4 Beta

I think n3o is now dedicated to AOSP and tbalden has also been busy elsewhere (buttons are tb's thing.)

I've had to move over to Bulletproof (which runs like a dream.) Flar also has the Elemental X kernel (haven't checked to see if that one support oc/uv but you can have a look if you like.)

Bulletproof supports s2w, dt2w, l2w at least and you can aroma all 3 to be active at once if you like.

N.B. if I'm out of order mentioning the other kernels here then please delete this post.

----------------------o('_')o----------------------
Sent from an HTC One with using xda app:
TrickDroid ROM 5.5.1
Bulletproof 1.9
 

09CarreraS

Senior Member
Jul 17, 2010
88
2
TeaMSeven:

I want to point out a bug when using this with the new 1.29.1540.16 update. The camera does not work any longer. I restored a clean copy of 1.29.1540.16 and the camera works. I tried this twice to make sure there were no issues. There is definitely a problem.
 

LorD ClockaN

Inactive Recognized Developer
Sep 1, 2008
14,106
28,537
Veli Losinj
www.losinj.com
TeaMSeven:

I want to point out a bug when using this with the new 1.29.1540.16 update. The camera does not work any longer. I restored a clean copy of 1.29.1540.16 and the camera works. I tried this twice to make sure there were no issues. There is definitely a problem.

Also working fine with TrickDroid rom

Sent from my HTC One using Tapatalk 4 Beta
 
D

Deleted member 4817222

Guest
Could we get double tap 2 wake to the next version?:)

Sent from my HTC One using Tapatalk 4 Beta

That would be really nice :D

I just flashed the kernel....reminds me of the good old times with neo's NCX-Kernel for HOX :D

Just some question: I am using HTCLogo 2 Wake/Sleep and everytime I push the button it is vibrating....is there some option do deactivate vibration when pushing the HTCLogo-Button? Is it maybe connected to system vibration options? Or if not, could the option be included in the next release? That would be awesome ;)

Thx in advance!

:good:
 

09CarreraS

Senior Member
Jul 17, 2010
88
2
working just fine on ARHD 9.3

ARHD and Trickdroid are based on a different version 1.29.401.16. The developers edition was 1.29.1540.3 and was updated to 1.29.1540.16. Tbalden's kernel was based on 1.29.1540.3. I was using his version 3.9.2. I only wanted the htc logo button and home on features. 3.9.2 kernel is not compatible with the new OTA.
 

n3ocort3x

Senior Member
May 10, 2012
5,859
10,822
Vienna
i have to talk to tb if he is ok with adding double tab to wake. i miss it to from my n4 and in my oneX kernel its also integrated. but i want it to be recognised at half lower section on whole screen elementalX wakes it only on the lowest part of screen afaik or am i wrong? (i have no big hands and waking device with s2w is a pain for me to :D) but it works flawlessly. so its more a handicap from my side

Sent from my HTC One using Tapatalk 2
 
  • Like
Reactions: JohnCorleone

MasterThiefGarrett

Senior Member
Sep 4, 2010
619
129
i have to talk to tb if he is ok with adding double tab to wake. i miss it to from my n4 and in my oneX kernel its also integrated. but i want it to be recognised at half lower section on whole screen elementalX wakes it only on the lowest part of screen afaik or am i wrong? (i have no big hands and waking device with s2w is a pain for me to :D) but it works flawlessly. so its more a handicap from my side

Sent from my HTC One using Tapatalk 2
doubletap2wake +1 please :)
man I really get addicted again, flashing this and that kernel blabla hahaha :D
 

Top Liked Posts

  • There are no posts matching your filters.
  • 91
    teaMseven_kernel_SENSE

    based on HTC Source 1.29.1540.3 Developer Edition​

    HOWTO REPORT ERRORS -> THE RIGHT WAY

    -) YOU need to provide me the following information, otherwise I´m not able to help:
    -) On wich ROM you are
    -) Wich Kernel and wich modules did you flash
    -) ALWAYS provide a last_kmsg AND a logcat (you dont know how to do that ? Use google or search here in this forum, its posted nearly everywhere)
    -) posts like "XYZ feature on ROM XYZ does not work" will be ignored (what should i do with that information ???)


    CHANGELOG (old versions) & KERNEL FEATURES
    Code:
    [B]teaMseven_kernel_SENSE_vv3.7[/B]
    - initial release
    - Fixed audio routing issue with voice calls [phone's earpiece amplification fixed, htc left out a good chop from its released kernel sources]
    - Added NTFS (read/write) support
    - All in one installer - script by                                    [user=1118681]@he_stheone64[/user] (thanks !)
    - Added init.d support (thanks                                    [user=3828647]@torxx[/user] !)
    - teaMSeven version - cooperation of n3ocort3x and tbalden
    - cleaned up synaptics_3k driver
    - linaro optimized
    - adding performance installer with 192mhz underclock (thanks pingpong)
    - CIFS enabled
    - added Votlage Control
    - Enabled system write
    - Disabled perf lock
    
    [B]teaMseven_kernel_SENSE_v3.7.1[/B]
    
    -added XZ compression
    -fixed Voltage Control
    -fixed sticking of frequencies
    -linaro -o3 optimizations (before it was -o2)
    -enabled interactive governor
    -updated interactive governor to MAKO baseline and CAF updates (thx kozmikkick)
    -updated ondemand governor to CAF baseline (thx kozmikkick)
    -added wheatley governor
    -added SIO I/O Sched
    -added FIOPS I/O SCHED
    
    [B]teaMseven_kernel_SENSE_v3.8[/B]
    - added Sweep2Wake to variants
    - slighty stronger vibration for Wake and Sleep events (so you will really notice accidental wakes)
    - tweak deadline io scheduler for more performance
    - added fsync on/off support (on by default, check sysfs)
    - added ROW I/O scheduler
    - added BFQ v6 scheduler
    - added USB fast charge option (off by default, check sysfs)
    - added smartmax governor (thanks MaxWen!)
    
    [B]teaMseven_kernel_SENSE_v3.9.2[/B]
    
    - fixed longtap Logo sleep for S2W and H2W modes
    - added Blinking Buttons notification feature (idea and first implementation by tbalden@TeaMSeven)
    - added 324 MHz freq and removed unused 192 MHz
    - more freqs below 378 MHz will follow, still ironing out some bugs
    - fastcharge retested (trickstermod works)
    - added new way to register longtap Logo2Wake / Logo2Sleep - you can leave your finger on the Logo now, and it will wake/sleep on long tap. More convenient and intuitive.
    
    [B]teaMseven_kernel_SENSE_V.4[/B]
    -updated Aroma installer with changelogs and version number
    -added lowfreqs (135MHz, 162MHZ, 216MHz, 270MHz)
    -added highfreqs (1836MHz, 1890MHz, 1944MHz, 1980MHz)
    -added new thermal implementation
    -fix laggy boot for PVS_2 Devices (and below)
    -disabled PNP manager (fixes freq sticking)

    Variants

    HOME2Wake and HTCLogo2Sleep:

    - What is HOME2Wake -> It's a bit similar to Sweep2Wake, but instead of swiping through the capacitive buttons, you have to push the Home button instead, to wake the device from sleep. Then press HTC logo to switch screen off. At times it takes 2 consecutive presses when the phone is in deepsleep. Still testing this stuff.

    VIDEO:

    HOME2Wake and HTCLogoMenu:

    HOME -> wakes phone
    HTC Logo -> Menu button mapping
    HTCLogo long tap -> screen off

    VIDEO:

    BLINK BUTTONS

    VIDEO:

    SENSE DOWNLOAD LINKS

    PERFORMANCE EDITION V.4

    BENCHMARKS

    V3.8, no GPU and NO CPU OC YET

    eruhy9uz.jpg


    Github

    Link

    Installation

    0. go into Recovery
    0.1 DO A NANDROID backup if you didnt already -- if anything goes cheesy, restore your backup
    1. flash All-In-One installer zip (aroma menus will ask for options)
    2. reboot

    Configuration of HOME2WAKE/HTCLogo behavior

    You can select the Variant you want in the Aroma installer, and also select a mod to Disable on-screen three-dot menu button (useful if you use HTCLogo2Menu configuration)
    Possible variants you can select in installer (recovery):
    - Stock (no wake, no menu, no sleep button)
    - Home2Wake + HTCLogo2Menu and long tap HTCLogo2Sleep
    - Home2Wake + HTCLogo2Sleep with long tap
    - Home2Wake + HTCLogo2Sleep with short tap
    - HTCLogo2Menu
    - Home2Wake
    - HTCLogo2Wake + HTCLogo2Sleep with long tap
    - HTCLogo2Wake + HTCLogo2Sleep with short tap
    - HTCLogo2Wake + HTCLogo2Menu and long tap HTCLogo2Sleep
    - Sweep2Wake + HTCLogo2Sleep with long tap
    - Sweep2Wake + HTCLogo2Sleep with short tap
    - Sweep2Wake + HTCLogo2Menu (will give you long tap HTCLogo2Sleep)

    About development of this kernel:

    This is the exact copy of tbalden´s kernel from his original thread, with all his h2w and htc logo stuff integrated + OC / UV / LINARO /GPU / SCHEDS / GOVERNORS / ETC...

    In the future i will add stuff and keep in sync with tbalden. I´m more then proud to work with such an aweseome dev together. I dont have the device yet, so its really improtant to provide me logs, kmsg, etc if u run into trouble. But also when i get the device, its important to provide me such stuff. I will do my best to get the most out of our HTC ONE´s


    Disclaimer

    -) I am not responsible for bricked devices
    -) you do this on your own will
    -) If you flash this, your warranty will be void


    CREDITS
    @pinpong for letting me know for what the hex values are :) thx
    51
    Stable Edition for Sense with Android 4.1.2​

    This part contains the non-OC/UV version, compiled with standard GCC 4.6
    This edition is for the users who only want the usability features and no speed,voltage or other cpu gpu related changes. It's safe to install it for the average non tweaker users.

    - Compiled from HTCDev source
    - Fixed audio routing issue with voice calls [phone's earpiece amplification fixed, htc left out a good chop from its released kernel sources]
    - Adds support for more USB OTG devices than official HTC kernel - (pls test if you think your DSL etc and report - only works if your phone's charged above 30%!) - PS3 controller wont work, htc's bluetooth stack is a no-go
    - Added CIFS (windows share filesystem mount support, use CIFS manager)
    - Added NTFS (read/write) support
    - All in one installer - script by @he_stheone64 (thanks !)
    - Added init.d support (thanks @torxx !)
    - H2W/L2W/L2M/S2W
    - blinking buttons (button light notification) - be aware that only blinks on notification if phone's not charging, and when screen is not on
    - Based on latest kernel source: 1.29.1540.3 Developer Edition
    - Tested on 1.28.401.7 (please report your Build number if differs), international One (m7, from UK)

    Known issues:
    - None
    - Aroma installer sometimes exits in the setup process, try again till success, progress slowly between pages, count to 3 before pressing Next

    KNOWN TO WORK ON:
    - 1.28 International edition based ROMs, and 1.29 (1.29.1540.3) developer edition based ROMs, updates up to 1.29.401.5, 1.29.xxx.13
    !Doesnt work on Sprint HTC One variant, as it's CDMA, not GSM!


    STABLE EDITION SENSE DOWNLOAD

    4.0.0 Stable All-In-One installer zip (flash from recovery) - kernel and modules and keylayout and working camera firmware
    teaMseven-sense-kernel-v4.0.0-stable-full_installer.zip: http://d-h.st/br9
    Use CWM or another AROMA compatible recovery. You can select all stuff from Menus, no need for additional flashing. If you get stuck, or exits to Recovery menu, try again. Should work! (Aroma is sometimes a bit flaky, but it works, preferably press Next buttons in installer a bit slower, that way it's more stable)


    Changelog
    Version 4.0.0-stable (.16 base) - June-4-2013
    Version 3.9.2-stable (codename: 'the next big thing') - May-4-2013
    - Added BlinkingButtons feature - architectural idea and first implementation by tbalden

    Version 3.9.1-stable - May-3-2013
    - fixes Long tap sleep for S2W and H2W modes

    Version 3.9-stable - May-3-2013
    - added new way to register longtap Logo2Wake / Logo2Sleep - you can leave your finger on the Logo now, and it will wake/sleep on long tap. More convenient and intuitive for me. Hope you'll like it!
    - removed 192Mhz step

    Version 3.8-stable - May-1-2013
    - added Sweep2Wake to variants
    - slighty stronger vibration for Wake and Sleep events (so you will really notice accidental wakes)
    - xz compression
    - added 192Mhz step (set it in one of the usual system tuner apps, stable enough,so i added it to Stable Edition)
    - fixed frequencies to stick - (thx showp-1984)


    Older versions:

    teaMseven-sense-kernel-v3.9.2-stable-full_installer.zip: http://d-h.st/MwG
    teaMseven-sense-kernel-v3.9.1-stable-full_installer.zip: http://d-h.st/jU5
    teaMseven-sense-kernel-v3.9-stable-full_installer.zip: http://d-h.st/WSv
    teaMseven-sense-kernel-v3.8-stable-full_installer.zip: http://d-h.st/xvQ
    teaMseven-sense-kernel-v3.7-full_installer.zip: http://d-h.st/f0t
    tbaldens-sense-kernel-v3.6-full_installer.zip: http://d-h.st/uSB
    tbaldens-sense-kernel-v3.5-full_installer.zip: http://d-h.st/WQy
    tbaldens-sense-kernel-v3.4-full_installer.zip: http://d-h.st/FHA
    Configuration variants, additional flashables (using init.d): http://xdaforums.com/showpost.php?p=40672557&postcount=211
    tbaldens-sense-kernel-v3.2-full_installer.zip: http://d-h.st/3FV
    tbaldens-sense-kernel-v3-full_installer.zip: http://d-h.st/S35
    Unified boot.img with switches (2.0): http://xdaforums.com/showpost.php?p=40631815&postcount=133
    Camera Flashable fix for v3.0 + ROM versions 1.29.xxx.12 and 1.29.xxx.13 here: http://xdaforums.com/attachment.php?attachmentid=1908030&d=1366810966 - you NEED this flashed from recovery, if you're on a rom based on those versions, so camera will work
    http://d-h.st/SIE - Base version 1.0 (not with HOME2Wake)
    http://d-h.st/4ZM - HOME2Wake & HTCLogo2Sleep version 1.1, test version, might need two taps when it deepsleeps, Push HTC logo for screen off
    http://d-h.st/JkK - HOME2Wake & HTCLogoMenu version 1.1 (if you want HTC Logo as Menu button)
    modules installer 1.1 (flashable from recovery), only for 2.0 version and below, for Wifi and kernel modules + HTCLogoMenu button, not needed for 3.0+ http://d-h.st/7Iq


    INSTALLATION

    0. go into Recovery
    0.1 DO A NANDROID backup if you didnt already -- if anything goes cheesy, restore your backup
    1. flash All-In-One installer zip (aroma menus will ask for options)
    2. reboot


    CONFIGURATION OF HOME2WAKE/HTCLogo behavior
    You can select the Variant you want in the Aroma installer, and also select a mod to Disable on-screen three-dot menu button (useful if you use HTCLogo2Menu configuration)
    Possible variants you can select in installer (recovery):
    - Stock (no wake, no menu, no sleep button)
    - Home2Wake + HTCLogo2Menu (will give you long tap HTCLogo2Sleep)
    - Home2Wake + HTCLogo2Sleep with long tap
    - Home2Wake + HTCLogo2Sleep with short tap
    - HTCLogo2Menu
    - Home2Wake
    - HTCLogo2Wake + HTCLogo2Sleep with long tap
    - HTCLogo2Wake + HTCLogo2Sleep with short tap
    - HTCLogo2Wake + HTCLogo2Menu (will give you long tap HTCLogo2Sleep)
    - Sweep2Wake
    - Sweep2Wake + HTCLogo2Sleep with long tap
    - Sweep2Wake + HTCLogo2Sleep with short tap
    - Sweep2Wake + HTCLogo2Menu (will give you long tap HTCLogo2Sleep)




    Source
    https://github.com/TeaMSeven/android_kernel_htc_m7-sense - master and performance branch

    Additional resources
    Cifs manager: https://play.google.com/store/apps/details?id=ws.plattner.cifsmanager&hl=en
    14
    +1 i want to be back on this kernel, but i use the camera alot for my son :good:

    I fixed it for .16 base, will send instructions after TrickDroid 5.4.0 release later today.
    10
    and another one for me
    9
    OP updated to V 3.7.1 huge changelog :p

    teaMseven_kernel_SENSE_v3.7.1

    -added XZ compression
    -fixed Voltage Control
    -fixed sticking of frequencies
    -linaro -o3 optimizations (before it was -o2)
    -enabled interactive governor
    -updated interactive governor to MAKO baseline and CAF updates (thx kozmikkick)
    -updated ondemand governor to CAF baseline (thx kozmikkick)
    -added wheatley governor
    -added SIO I/O Sched
    -added FIOPS I/O SCHED

    Additional INFO:

    Undervolt with SYSTEM TUNER PRO (It was the only one on ONE X where we were absolutely sure the voltages get applied) for other stuff I recommend TRICKSTER MOD, or SETCPU