Is there any tweak application for this kernel stweaks not support this
Use trickster mod app. Its free on play store.
Sent from my GT-N7100 using xda app-developers app
Is there any tweak application for this kernel stweaks not support this
How does it work touchwake? I mean is something like the new LG G2 feature?
Any video example?
No i didnt UV.I just flashed new kernel and faced mentioned problem.Flashed back to previous kernel and no problem ...
Sometimes it could happen note will not wake up, but I know that from other Samsung devices even with stock rom and stock kernel.
But with latest Saberkernel, it phone fall asleep permanently at 99 or maybe even at 100%
I now use Saber kernel 25. For me have more performance than 32.2. With 32.2 i have some lag. V 25 works superfast and no lag..
install Exynos mem bug checker from play store... and u will see that your phone will be affected if u use saber kernel v25 .....but if u use v32.2 your device is not affected with the bug... so you should be careful ... cos you'll burn your phone
just what I found out
install Exynos mem bug checker from play store... and u will see that your phone will be affected if u use saber kernel v25 .....but if u use v32.2 your device is not affected with the bug... so you should be careful ... cos you'll burn your phone
just what I found out
I have gone through all the pages, cant find the answer regarding the exfat sdcard. Does it support exfat? I have install this kernel but it cant detect my sdcard. My card is exfat format. Thanks in advance
Sent from my GT-N7100 using XDA Premium 4 mobile app
Guys one question.. what is intelli-plug feature in Saber kernel?
Is useful to activate in terms of performance? How it works?
Thanks in advance for responding..
I have gone through all the pages, cant find the answer regarding the exfat sdcard. Does it support exfat? I have install this kernel but it cant detect my sdcard. My card is exfat format. Thanks in advance
Sent from my GT-N7100 using XDA Premium 4 mobile app
Does this kernel have (I expect yes) che SDS bug fix included?
since it is not mentioned in the info in the first page, while, in other kernels, this info is clearly highlighted.
PS
I'm reading it is reccomended TWRP recovery. I use PHILZ recovery. I hope I can try this kernel without any problem
tnks
tnks mate
and what about recovery?
OP strongly reccomends TWRP but I use PHILZ..
No. Only n7100
10|03
Upgrade to Linux 3.0.97
Revert of GPU edits to fix glitches in Graphics/reboots
Raise Voltages on 1960 for stability
Update zram_drv.c … thanks to insanemal
9|26
Raised Max Clock Speed --1960
Edits to GPU Clocks and scaling for Max performance (while preserving battery at stock values)
New compression
ADB Remount Enabled
9|18
Complete Rebuild from Updated Source
Zen default sched
Upgraded to 3.0.96
Fixed GPU freq scaling
More voodoo code removal
9|11
Upgrade to Linux Version 3.0.95
Edits to GPU Voltage Allocation
Boeffla Sound Replaces Voodoo (by request)
Boeffla and Trickster apps now added with flash
Clean Up of Version
Remove Dirty in Version Description
USB Charging Rate Increased to match A/C rate
ZZmoove Updated to 7d
Fixed Memory/cache leak that was causing instability and poor battery
8|28
I have been slacking on releasing kernels outside of my ROMs so this changelog is kind of a mess.
If you cannot follow the log please see my git for itemized changes
--Upraded to Linux 3.0.93
-- Added in exfat module source thanks to Faux123 and SORC
-- ZZMOOVE updated to v0.7 (ZaneZam/Yank)
-- LulzactiveQ added in (Gohkanmoral)
-- Upgraded to Linux 3.0.91
-- Wifi driver edit for reduce wakelock
-- All sources Merged!!
-- Upgraded to Linux 3.0.87
-- Added ZZMOOVE
---- zzmoove edited to support more frequencies
-- Edits to WIFI handling for less wakelock issues/performance
-- Some Peg gov Edits
-- Edit to I/O que
-- Edits to kernel/module.c in hopes of further work on exfat later on
7|2 --
Upgraded to Linux Version 3.0.84
New Under Clock Frequency --STABALIZED
- 100 mhz UC all set
Triangle away support
---All testers have reported back as things being stable and most
have run it through intensive and reg use and no SOD at 100mhz low.
I believe the times of certain devices not liking the low step is over. Have Fun
6|24 --
Upgraded to Linux Version 3.0.83
2 Versions
--- One with UC for those who's chips dont mind
---One Stock Low end
New Under Clock Frequencies
- 120 mhz UC VERSION ONLY
Edits to Peg GOV in Both Versions
6|19 --
Upgraded to Linux Version 3.0.82
New Under Clock Frequencies
- 160 mhz
- 140 mhz
6|13 --
Complete Clean Rebuild from updated sources
Linux 3.0.81
ZRAM
Freq Voltage Edits
Compression Edits
Freq "Bleeding" fixed
Intelliplug/Ecomode
More Mali Edits
Dynamic Filesync
5|05 --
Upgraded to Linux Version 3.0.76
GPU Handling is Back And Fixed
Touchscreeen Mods
TouchBoost Control Added
SetLocalversion Modification ( Just Shows differently in about)
More...
4|26 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release