Huawei Ascend D1 Quad XL (U9510E) - Update to Jelly Bean 4.1.2
- Thread starter simonfzhao
- Start date
damn damn
Damn damn
I think i bricked my U9510E already. I updated my MIUI 3.11.29 with the ver. 4.2.(something) and it rebooted, the screen "dimmered" and it rebooted automatically. Now it's stuck in Huawei Ascend splash screen, and can't turn it off.
When I hold down power button in 10 seconds it just reboot. When I hold down VOL+ nothing happens either.
I tried the instructions in post #198, but nothing happens when fastboot syntax is launched and holds VOL+ and VOL- when rebooted.
Anyone got any help, otherwise I'm done - I'll appreciate all help I can get.
Regards
SulPhoria
Damn damn
I think i bricked my U9510E already. I updated my MIUI 3.11.29 with the ver. 4.2.(something) and it rebooted, the screen "dimmered" and it rebooted automatically. Now it's stuck in Huawei Ascend splash screen, and can't turn it off.
When I hold down power button in 10 seconds it just reboot. When I hold down VOL+ nothing happens either.
I tried the instructions in post #198, but nothing happens when fastboot syntax is launched and holds VOL+ and VOL- when rebooted.
Anyone got any help, otherwise I'm done - I'll appreciate all help I can get.
Regards
SulPhoria
Damn damn
I think i bricked my U9510E already. I updated my MIUI 3.11.29 with the ver. 4.2.(something) and it rebooted, the screen "dimmered" and it rebooted automatically. Now it's stuck in Huawei Ascend splash screen, and can't turn it off.
When I hold down power button in 10 seconds it just reboot. When I hold down VOL+ nothing happens either.
I tried the instructions in post #198, but nothing happens when fastboot syntax is launched and holds VOL+ and VOL- when rebooted.
Anyone got any help, otherwise I'm done - I'll appreciate all help I can get.
Regards
SulPhoria
Try flashing any of Svik's rom.
Damn damn
I think i bricked my U9510E already. I updated my MIUI 3.11.29 with the ver. 4.2.(something) and it rebooted, the screen "dimmered" and it rebooted automatically. Now it's stuck in Huawei Ascend splash screen, and can't turn it off.
When I hold down power button in 10 seconds it just reboot. When I hold down VOL+ nothing happens either.
I tried the instructions in post #198, but nothing happens when fastboot syntax is launched and holds VOL+ and VOL- when rebooted.
Anyone got any help, otherwise I'm done - I'll appreciate all help I can get.
Regards
SulPhoria
Try the FF:
Hold Power + Volume Down for fastboot mode.
Flash any of svik's rom during fastboot mode.
Attention!! New ROM!!
[ Custom ROM ] Huawei U9510E P6_EMUI_2.0_for_U9510E_PupsikOFF_port
Base - P6-U00_EmotionUI_2.0_V100R001C00B030SP1
Model - U9510E/U9510
Port Maker - PupsikOFF
Update Log
- wi-fi fix
- KingUser fix
- replace stock browser to NextBrowser
- add GoFlashLight app
- long press Home (hard) button fix
- add Google Apps, LG lockscreen
- and more fix
- video files play with Huawei Video player
Still not fixed
- FM radio
- youtube (but you can download Photon Browser from Play Market for view flash video)
How to install ROM
- Flash this port after install official B610 or B611
- download ROM and unzip on PC
- charge more 30%
- backup your data
- connect phone to PC
- run Sec_P6.bat
- when the process is finished and the phone reboots, hold the volume button up and the power button
- in recovery menu choose Wipe data --> Yes then Wipe cache and Reboot
Enjoy real EMUI 2.0.
DOWNLOAD
[ Custom ROM ] Huawei U9510E P6_EMUI_2.0_for_U9510E_PupsikOFF_port
Base - P6-U00_EmotionUI_2.0_V100R001C00B030SP1
Model - U9510E/U9510
Port Maker - PupsikOFF
Update Log
- wi-fi fix
- KingUser fix
- replace stock browser to NextBrowser
- add GoFlashLight app
- long press Home (hard) button fix
- add Google Apps, LG lockscreen
- and more fix
- video files play with Huawei Video player
Still not fixed
- FM radio
- youtube (but you can download Photon Browser from Play Market for view flash video)
How to install ROM
- Flash this port after install official B610 or B611
- download ROM and unzip on PC
- charge more 30%
- backup your data
- connect phone to PC
- run Sec_P6.bat
- when the process is finished and the phone reboots, hold the volume button up and the power button
- in recovery menu choose Wipe data --> Yes then Wipe cache and Reboot
Enjoy real EMUI 2.0.
DOWNLOAD
Respect from Russia
Last edited:
thanks for posting the port. other, please provide feedback when errors occur.
Last edited:
It didn't quite work, but it got me trying again on recovery program, after I head the usual "usb device connected sound" when I held down the power button and vol+down.
I got into the chinese recovery and wiped data+cache and chose install from external zip and browsed to my rom file.
I'm up and running .... YAY!!
Thanks alot for helping - I'm never gonna chose to update to the newly released update from MIUÍ. Maybe when I got the guts to, I'll try one of the other roms you guys are making. Awesome, you guys are geniouses.
I'll follow this thread in future and ready to answer questions if someone does the same thing as I did
SulPhoria
Feedback on this rom, anyone? Im currently downloading it..
thanks Sent from my HUAWEI U9510E using XDA Premium 4 mobile app
It didn't quite work, but it got me trying again on recovery program, after I head the usual "usb device connected sound" when I held down the power button and vol+down.
I got into the chinese recovery and wiped data+cache and chose install from external zip and browsed to my rom file.
I'm up and running .... YAY!!
Thanks alot for helping - I'm never gonna chose to update to the newly released update from MIUÍ. Maybe when I got the guts to, I'll try one of the other roms you guys are making. Awesome, you guys are geniouses.
I'll follow this thread in future and ready to answer questions if someone does the same thing as I did
SulPhoria
Good thing it works now. It's actually easy to fix our unit. The MIUI rom you flashed is designed for U9508 (Huawei Honor 2). It's not actually for our unit but it does work if you make a few mods. That's the reason the update didn't work and created a bootloop.
---------- Post added at 08:22 AM ---------- Previous post was at 08:15 AM ----------
Feedback on this rom, anyone? Im currently downloading it..
Sent from my HUAWEI U9510E using XDA Premium 4 mobile app
We are the ones that should provide feedback.
I just thought someone from this forum might already using the rom right now and can provide feedback.
Sent from my HUAWEI U9510E using XDA Premium 4 mobile app
HELP!
After i ran Sec_P6.bat
boot file are failed to load and it stuck on sending recovery
the device are stuck on huawei ascend logo
what should i do?
please help me.
thanks.
HELP!
After i ran Sec_P6.bat
boot file are failed to load and it stuck on sending recovery
the device are stuck on huawei ascend logo
what should i do?
please help me.
thanks.
I think Svik forgot to mention that you have to have flashed the official B610 to unlock the bootloader. That's the only reason I think that it failed to flash boot.img.
Sent from Huawei Ascend D1 quad XL using XDA Premium 4
---------- Post added at 12:30 PM ---------- Previous post was at 12:28 PM ----------
My download keeps on getting a network error. Hosting a file on google drive is not really reliable.
Sent from Huawei Ascend D1 quad XL using XDA Premium 4
Yup.. i noticed it that too...
And for me its a bit laggy and it could have been better for me if navigation bar isnt there..since our phone has capacitive buttons, it eats part of the screen..
But its still a nice work from the developers.. thanks guys..
am still testing it.. im gonna use it for the mean time.. Sent from my U9510E using XDA Premium 4 mobile app
Good for you guys that you're able to download and flashed it. I tried downloading it twice but it keeps failing. I'll try next time if someone will upload it to a different host.
Yup.. i noticed it that too...
And for me its a bit laggy and it could have been better for me if navigation bar isnt there..since our phone has capacitive buttons, it eats part of the screen..
But its still a nice work from the developers.. thanks guys..
Sent from my U9510E using XDA Premium 4 mobile app
Yep the navigation bar should be remove..
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
20Hello Everyone,
Below is a tutorial I have compiled and translated from bbs.anzhi.com on how to update your Huawei Ascend D1 Quad XL (U9510E) to the latest version of Android offered by EmotionUI, Jelly Bean 4.1.2:
First of all, I want to give credit where credit is due:
genokolar (aka G大) - Creator/Modder of the Custom Recovery for this, and many other phones coming out of China
Ry09iu (aka R大) - Creator of a Rooted ROM based on EmotionUI B534, which is based on Android 4.1.2
【LUV】 - The board moderator for the D1Quad section of bbs.anzhi, also who's ROM release I used for my phone, but it's upto you to choose which one you want to use
**IT IS NOT RECOMMENDED FOR YOU TO ATTEMPT THIS IF YOU DO NOT HAVE A PREVIOUS EXPERIENCE WITH FLASHING PHONES. IN THE CHANCE THAT YOU BRICK YOUR PHONE, I CANNOT BE HELD RESPONSIBLE FOR IT**
**DON'T FORGET TO BACKUP YOUR FILES!!**
Now that the credits and the warning are given, let's get started:
Required Tools:
1. Recovery 6.0.1.9: This tool will open in command prompt and will allow you to flash in the Custom Recovery created by genokolar, as well as the stock recovery released by Huawei. Mirror
2(a).Official ROMs:
i. Official EmotionUI ROM B551 (Updated January 11, 2013): Release Notes
2(b).Custom ROMs:
i. Rooted Version of EmotionUI Rom (Author: genokolar):
- B534 Download
ii. Rooted Version of EmotionUI Rom (Author: Ry09iu):
iii. Rooted Version of EmotionUI Rom with HOLO as default Launcher (Author: Ry09iu, Modded by LUV):
iv. MIUI V4.1 - converted from MIUI V4.1 for Honor 2 (Author: Ry09iu):
- Download
3. GApps [Jelly Bean 4.1.2 (Author goo.im/gapps)]: Download
*The roms are hosted in China so the download will be slow, please be patient and your download will be done in an hour or two*
**PLEASE PLACE THE ROM YOU WISH TO UES INTO YOUR EXTERNAL SD CARD BEFORE CONTINUING**
Step 1: Flashing Custom Recovery
1. Turn-on USB debugging on your phone [Settings -> Developer Settings -> USB debugging]
2. Plug in your Phone to your computer via USB for it to install the appropriate drivers*
3. Run recovery6.0.1.4_AscendD1Q.exe
3.5 If your system locale is set to anything other than Chinese, you will get this:
But what you should see is this:
4. Type in "1" and press Enter -> This Recovery Flasher will do what it's made to do and when it's completed, your phone will now have a custom recovery.What that means is: said:
5. The application will automatically close 10 seconds after the Recovery has been successfully flashed.
Note from Genokolar said:
*If the drivers do not install properly, please download the driver attached in this post and install it manually.
Step 2: ROM Flashing
1. Boot your phone into the new recovery. (either by starting the application again and selecting option 3, or press and hold the Power Button with Volumn Up)
2. You will be greeted by the Custom Recovery Screen show below:
3. Scroll to select option 3 (Wipe data), confirm the wipe
4. Scroll to select option 4 (Wipe cache), confirm the wipe as well
5. Scroll to select option 2 (Select zip to flash/install)
6. Scroll to and select option 4 (Install from external zip)
7. Scroll to and select the zip file of the ROM which you have previously downloaded and placed into your external SD Card, confirm the flash
7.5. At this point, you can either flash in the gapps right away, or flash it after rebooting into the OS. I chose to flash it after booting into the OS for the first, but I don't think it will cause any problems. I will be posting the way I did it, and if you guys did it the other way, let us know if it worked or not
*IMPORTANT NOTE*
When you're booting up your system out from Recovery, you will be asked whether or not you would want your ROM to auto update the recovery, shown below:
Please select the one being highlighted in the image, which is option 2 ([*] Cancel - Back). OR CONSEQUENCES WILL NEVER BE THE SAME!
Step 3: Flashing GApps
1. Boot into recovery
2. Scroll to and select option 4 (Install from external zip)
3. Scroll to and select the zip file of GApps you have downloaded "gapps-jb-20121011-signed.zip" or whatever you may have renamed it to, confirm the flash
4. Reboot into OS
5. *THE NOTE ABOVE STILL APPLIES, SO HERE IT IS AGAIN*
*IMPORTANT NOTE*
When you're booting up your system out from Recovery, you will be asked whether or not you would want your ROM to auto update the recovery, shown below:
Please select the one being highlighted in the image, which is option 2 ([*] Cancel - Back). OR CONSEQUENCES WILL NEVER BE THE SAME!
Step 4: ALL DONE!
Congratulations, assuming everything was done properly, and everything worked out, now you will have Android 4.1.2 on your Huawei Ascend D1 Quad XL.
Images not showing up in your GooglePlay Store? YouTube not working?
Here is how our very own 12andy fixed the problem:
11[ Custom ROM ] U9510E B611 by svikfromorel v3.0
Base - B611 official
Model - U9510E/U9510
ROM makers - SvikFromOrel feat. PupsikOFF
Update log
- Root
- Root Explorer
- Google App
- HwLauncher6.apk - 4х5,
- HwMeWidget.apk - separate
- Phone.apk - fullscreen
- Breeze.hwt, Onion.hwt - 2 themes & some ringtones
- Chrome and Gmail (not part of the standard gapps),
- Titanium BackUp,
- Bootanimation.zip - my standart boot anim.
- Build.prop edit: mode Н+ (3,75G)
- removed some Chinese programs
- repack cust.img for Euro location
How to install ROM
- download ROM and unzip on PC
- charge more 30%
- backup your data
- connect phone to PC
- run Flash_all_en.bat
- when the process is finished and the phone reboots, hold the volume button up and the power button
- in recovery menu choose Wipe data --> Yes then Wipe cache and Reboot
DOWNLOAD8CWM
who wants to see the English version of CWM??
One Russian guy has created a patch. His name is PupsikOFF.
link on 4PDA post
- Copy the attached file to your SD card
- launch Chinese recovery
- Scroll to select option 2
- Then Scroll to select option 4
- Find on your SD card recovery_patch.zip
- That's all.
After the restart, recovery will again become a Chinese.
it's better than nothing
View attachment recovery_patch.zip7Attention!! New ROM!!
[ Custom ROM ] Huawei U9510E P6_EMUI_2.0_for_U9510E_PupsikOFF_port
Base - P6-U00_EmotionUI_2.0_V100R001C00B030SP1
Model - U9510E/U9510
Port Maker - PupsikOFF
Update Log
- wi-fi fix
- KingUser fix
- replace stock browser to NextBrowser
- add GoFlashLight app
- long press Home (hard) button fix
- add Google Apps, LG lockscreen
- and more fix
- video files play with Huawei Video player
Still not fixed
- FM radio
- youtube (but you can download Photon Browser from Play Market for view flash video)
How to install ROM
- Flash this port after install official B610 or B611
- download ROM and unzip on PC
- charge more 30%
- backup your data
- connect phone to PC
- run Sec_P6.bat
- when the process is finished and the phone reboots, hold the volume button up and the power button
- in recovery menu choose Wipe data --> Yes then Wipe cache and Reboot
Enjoy real EMUI 2.0.
DOWNLOAD
Respect from Russia7Alryt.. tnx..
Wow.. real emui 2.0. Im excited!
Sent from my HUAWEI U9510E using XDA Premium 4 mobile app
Hi guys! Yeah, I realy install a EMUI 2.0 test ROM from P6 with 4.2 Android, but find some bags... Wi-fi not work and dial up have some errors.. I will try to fix them all.
