Remove All Ads from XDA
Find Your Device:
Or Continue to Thread: Installing CM11 on Stock Nook …
16th March 2014, 07:17 PM |#1  
OP Member
Thanks Meter: 3
Hard to find a good step by step guide on here.

I have a stock 32GB nook HD+ 2.2.0 and want to install CM11 on the internal memory. Started reading this tutorial but getting a little lost. Whats the difference between the emmc version and the non emmc? Are they just different version for running CM on sd card instead of the internal memory like the old nooks?

Do I need to root first or is cm11 already rooted, if so how? getting lost on all these tutorials.

I have a 4GB microSD should I use the 4gb version on the stock small?

So here's what I am thinking for the internal nook install.

Use win 32disk imager and format the sdcard using the NookHDplus-bootable-CWM-6028-for-stock-small-rev4-(05.15.13) or 4gb image?

Then transfer or to the sd card still zipped up and use CWM recovery to flash it? I'm thinking the stock small CWM should be used so I can fit the CM zip on the 4gb sd card.