Or Continue to Thread: Help with Docooler QI back
Find Your Device:
22nd March 2014, 04:11 PM   |  #1  
OP Senior Member
Thanks Meter: 28
 
119 posts
Join Date:Joined: Oct 2010
More
I have the Docooler QI back and because of the increased thickness, I have issues with my two cases. They both for but have issues.

My primary case is an Element Atom. The carbon fiber insert is starting to pop off and the my car usb charger falls out because the car doesn't line up. My other case is a UAG and again the usb port doesn't line up.

I tried a QI insert (zitrades on Amazon) with the stock back but it would not charge reliably. I'm not sure if that's because I have a slightly larger battery (Ankker 2200) But it world charge, them stop every few seconds.

Does anyone have a case that works well with the Docooler back?

Has any taken the Docooler receiver and put it in the stock back?

Has anyone cored out a case with a dremel to make more room for the Docooler back? (Probably more of an option with the uag than the atom).

If I can't get a functional case option, I will have to come up with a Qi setup for my car which will probably be more expensive.

Thanks!

Sent from my SCH-I535 using Tapatalk