Or Continue to Thread: [UPDATE][RECOVERY]CWM 6.0.5.1 …
Find Your Device:
7th July 2014, 09:06 PM   |  #1  
digyvijaykumar123's Avatar
OP Senior Member
Flag Koderma
Thanks Meter: 1,273
 
319 posts
Join Date:Joined: Nov 2013
Donate to Me
More

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

CWM RECOVERY 6.0.5.1 FOR A116


SYNC TO LATEST CM SOURCE
CONFIGURED TO CMUPDATER


REQUIREMENTS:-
FOR PC => Sp Flash Tool
FOR MOBILE => Root and MOBILE UNCLE TOOLS APP


BUGS:-REPORT IF ANY

DOWNLOADS-
CWM.6.0.5.1.img
CWM.6.0.5.0.img


HOW TO INSTALL:-
MOBILE
  • Download the recovery.img and Put it in root of your SDCARD
  • Open Mobile uncle tools app and select Recovery Update
  • When prompt select Yes and then again yes to reboot into recovery to check it is working or not.
  • Done



PC
  • Install USB drivers for your phone using Micromax drivers or if already installed then OK.
  • Extract the Stock ROM folder and replace recovery.img with cwm recovery which you downloaded from here.
  • Open the SP Flash Tools.
  • In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
  • Check only recovery.img, preloader and uncheck all others
  • Switch off your phone (Remove the battery)
  • In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
  • Click the Download option (present on the right of Firmware>Upgrade option) and the flash tool will start looking for your phone.
  • Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
  • After the process completes, a green ring will appear on your device signalling that the process was successful.
  • Disconnect and reboot or go to recovery to check it.



Kernel Used:-Kash Kernel Stable

CREDITS:-
koushik Dutta FOR HIS CLOCKWORK-MOD RECOVERY.
@chrmhoffmann for compiling.
@kashifmin For his kernel & Support.
Last edited by digyvijaykumar123; 7th October 2014 at 08:47 PM.
The Following 20 Users Say Thank You to digyvijaykumar123 For This Useful Post: [ View ]