[REF] Task 29 (format) without drivers, without mtty.
(To make it short, follow the red sentence to format your phone to avoid roms problem.)
I hex-edited RomUpdateUtility.exe so it runs task 29 right after flashing ruu_signed.nbh
Task 29 formats your phone memory (=binfs). It prevents weird error appearance when you flash new Roms.
But you stile need something to flash, it may be a radio, a splashscreen nbh or a blank nbh file (shadrack repack provide a tiny blank nbh).
Usually you don't need anything more than the file provided in the packs. so:
Just unzip and run task29.exe .
Eventually, you may replace ruu_signed.nbh with the radio/splashscreen of your choice.
When update status reach 99%, press vol down button, and keep it pressed until the phone reboot to the three color bootloader.
After the phone reset itself, your old rom will be gone, so it can't boot to winmo: binfs has been formated, your phone memory is clean.
if you fail
to press vol down key and your phone get stuck on the white screen, just remove your battery
, then try again: press power, and keep vol down pressed immediatly next, until the phone get to RVB bootloader.
When your phone is back to RVB bootloader screen, use the leocustomruu.exe provided with your favorite rom package to flash a new rom
, or flash it from memory card using standard procedure.
Repack by ShaDrac (Recommended)
No radio needed, smaller, faster.
Video tutorial by [★]
(Video 9: How To Perform A Task 29 Without MTTY)
direct link: http://www.youtube.com/watch?v=DtTDuc4V4cU
remove the "reset" command from task29.exe, to stay into boot loader screen. Then, one should flash the new rom immediatly using their cook's flash utility.
RS mirror, by Sardelisp
Edit, distribute, repack, comment and spread these files as much as you want.