T959 (US T-Mobile version of the Galaxy S) Firmware that can be flashed through Odin to restore all partitions to the way your phone was shipped to you.
WARNING!!! THIS WILL WIPE ANY DATA ON YOUR DEVICE, IT WILL REPLACE YOUR BASEBAND, KERNEL, RECOVERY AND OS.
JFD ODIN Images from Samsung (PDA)
www.justanotherdev.slackdev.com/T959UVJFD.tar
MD5:632730f6b637f53e5b10e5cbc8b966a7
512 PIT File (PIT Extract first!)
www.justanotherdev.slackdev.com/s1_odin_20100512.rar
MD5:b5628c8e183fdd8f4c703321ca40e33a
ODIN
www.justanotherdev.slackdev.com/Odin3.rar
ALL 3 Files plues the root update.zip
http://tinyurl.com/2bc5b6r
thx to KopyKatKiller
INSTRUCTIONS!
1.Your Device must be in DOWNLOAD mode to use ODIN.
2.Get your phone into Download mode by holding vol down and power.
3.THEN connect your phone to the USB. (some folks have had luck doing it in reverse..connecting the USB then Power and vol down)
4.Open Odin and load each file with it's corresponding field..PIT,PDA,CSC etc. (In this case we just use the PDA and PIT)
5.Don't check anything else, the other two boxes should be checked by default (Auto Reboot and Reset Time)
6.Hit "start"! be patient!
NOTE: COM3 worked fine for me. COM should not matter as long as you are using the correct drivers.
Finally we get some U.S love from samsung firmwares.
For those looking the Nandroid method it is in the post below but only recovers ,system, data, cache and datadata. Not your kernel/recovery or BASEBAND/RADIO (Modem.bin)
Thx to all helping work on the Vibrant. Especially Youneek, Scepterr, MS_Guru, Wes Garner, rhcp0112345, and anyone I may have forgot.
Twitter
WARNING!!! THIS WILL WIPE ANY DATA ON YOUR DEVICE, IT WILL REPLACE YOUR BASEBAND, KERNEL, RECOVERY AND OS.
JFD ODIN Images from Samsung (PDA)
www.justanotherdev.slackdev.com/T959UVJFD.tar
MD5:632730f6b637f53e5b10e5cbc8b966a7
512 PIT File (PIT Extract first!)
www.justanotherdev.slackdev.com/s1_odin_20100512.rar
MD5:b5628c8e183fdd8f4c703321ca40e33a
ODIN
www.justanotherdev.slackdev.com/Odin3.rar
ALL 3 Files plues the root update.zip
http://tinyurl.com/2bc5b6r
thx to KopyKatKiller
INSTRUCTIONS!
1.Your Device must be in DOWNLOAD mode to use ODIN.
2.Get your phone into Download mode by holding vol down and power.
3.THEN connect your phone to the USB. (some folks have had luck doing it in reverse..connecting the USB then Power and vol down)
4.Open Odin and load each file with it's corresponding field..PIT,PDA,CSC etc. (In this case we just use the PDA and PIT)
5.Don't check anything else, the other two boxes should be checked by default (Auto Reboot and Reset Time)
6.Hit "start"! be patient!
NOTE: COM3 worked fine for me. COM should not matter as long as you are using the correct drivers.
Finally we get some U.S love from samsung firmwares.
For those looking the Nandroid method it is in the post below but only recovers ,system, data, cache and datadata. Not your kernel/recovery or BASEBAND/RADIO (Modem.bin)
Thx to all helping work on the Vibrant. Especially Youneek, Scepterr, MS_Guru, Wes Garner, rhcp0112345, and anyone I may have forgot.
Last edited:
