Talking [KERNEL]Buzz OC/UV 1.61Ghz CFS+BFQ+SmartAss+TUN+EXT4+.35 ACE 1.3.8.3 [24/03/2011]

[UPDATE 02/03/2011]

Here is my OverClocked kernel for the Desire HD. This kernel is undervolted all the way up to 1.1ghz and uses a maximum overvolt of 150mV at 1.51ghz

I AM NOT RESPONSABLE FOR ANY DAMAGE CAUSED BY THIS ALTHOUGH
TESTED YOU UNDERTAKING THIS MEANS U UNDERSTAND AND TAKE THE RISKS

like my undervolted kernel clock speeds under 1209MHz are undervolted in comparison with stock and 1209Mhz is at the same voltage as stock. Above the system is at a hight voltage than stock slighly.

This KERNEL is for people woh dont mind going highet voltage than stock. If this isnt you check out my UV kernel

As the DesireHD has a slightly better quiality CPU than the Z/G2 this over volt can be slightly less on this.

I cannot guarrentee that this kernel will be stable on all DesireHD's if you get freezing/crashing limit the CPU speed in setCPU or install my UV kernel.

[CHANGELOG]
1.3.8.3
-- Patched to .35


----- NO more CM support as the stock CM kernel is very good -----

THE FULL CHANGE LOG LIVES HERE

[INSTALL]

via Clockwork Recovery

Needed :-
-- ClocworkMod Recovery installed
-- SENSE This .zip

1) copy the .zip to your sdcard
2) boot into recovery
3) flash .zip from sdcard
4) select requierd .zip
4) FLASH
5) reboot

OR Fastboot (Builds Before 0.0.9)

Needed
-- Fastboot Set Up
-- SENSE This .zip
-- ADB set up
-- Set CPU


1) boot into bootloader (fatboot mode)

2) put the zImage from the .rar file in the fastboot directoy

3) run

Quote:
fastboot flash zimage zImage
5) run

Quote:
fastboot reboot
6) wait for android to boot

///// Make shure you have the .ko from the .zip / .rar where the zImage came from ///////

7) put the .ko frile from the .rar file in your adb director

8)run

Quote:
adb push bcm4329.ko /sdcard/
9) in adb shell run these commands in order

Quote:
su

mount -o remount,rw /dev/block/mmcblk0p25 /system

rm /system/lib/modules/bcm4329.ko

busybox cp /sdcard/bcm4329.ko /system/lib/modules/bcm4329.ko

rm /sdcard/bcm4329.ko
10) reboot

11) use SetCPU to gain the extra speed

****Due to the init bug (100% CPU usage use SetCPU to limit speed when screen off to save your battery I recommend 256 to 768*****

Here is the zip to flash in clockwork too ... when its out :D

[ALL VERSIONS]
1.3.8.3SENSE
1.3.8.2SENSE
1.3.8SENSE
1.3.7SENSE
1.3.6SENSE
1.3.5SENSE
1.3.4SENSE
1.3.3SENSE
1.3.0SENSE
1.2.5SENSE
1.2.3r2SENSE
1.2.2SENSE
1.2.1SENSE
1.2.0 SENSE
1.1.4 CM ---- SENSE
1.1.3 CM ---- SENSE
1.1.2 CM ---- SENSE
1.1.1 CM ---- SENSE
1.1.0 CM ---- SENSE
1.0.8 CM SENSE
1.0.7
1.0.6
1.0.5
1.0.4
1.0.2
1.0.1 fixed please reflash
1.0.0(GOLD)
0.0.9-CM ---- 0.0.9-SENSE

Source
https://github.com/BuzzBumbleBee/HTC_ACE_KERNEL

Credits

Cyanogen team for info on edition speed tables
-Mr. X- For helping me fix the source
Ziggy471 for LZMA compression source
Lee For gis Gov and CPU table fixes
CK2 [BFS Patch]
erasmux [SmartAss CPU governor]
Aplharev ppl for help
Attached Files
File Type: rar OC-BUZZ-ACE.rar - [Click for QR Code] (2.78 MB, 1862 views)
File Type: zip OC-BUZZ-ACE.zip - [Click for QR Code] (4.25 MB, 7149 views)
Phone :- Sony Xperia Z (CM10.1)

Tablet :- Asus Transformer Prime (TF201) & Asus Transformer TF101


IRC :- freenode #asus-transformer #G2Root come join us
I am Bumble-Bee

Twitter :- BumbleDroid Follow Me

If I Have Helped You Buy Me A Beer