Well I have 0.. I've checked that every time I've given this a go. I'm assuming since I've rooted 4.2.2 before AND ran (successfully) motowpnomo, I jump to slapmymoto right?
Well when I do that and run the dalvikvm -cp ... command line, it gives me the line that the system is not write protected (duh), proceed to step 3 attempt the 4.4 ota.. But it doesn't auto reboot like I've read it should. So I've manually done adb reboot, figuring no difference right?
After I'm on 4.4 I try adb reboot bootloader to flash the 4.2.2 recovery.. Does it's business, fastboot reboot.
It's now gotten to the LAST command line with the "echo" command where I get permission denied.. How does that work?
idk what guide your following but i think it is old.
1. download the correct 4.2.2 CU firmware for your Carrier
2. open the .zip files and extract the files into your folder with ADB and MFastBoot.
3. Boot your phone into the bootloader
4. Run the below commands one by one
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
i recommend wiping your device also but that is up to you
Code:
fastboot erase userdata
fastboot erase cache
Step1)
Unzip SlapMyMoto-1,0.zip and push the jar file to your internal storage
Code:
adb push SlapMyMoto.jar /sdcard/SlapMyMoto.jar
Step2)
Use
http://www.cydiaimpactor.com/ to open up a telnet session as system user on port 2222. We covered how to use Impactor and telnet in the RockMyMoto root, I won't be covering it again since this post is going to be long enough already, see here ->
http://xdaforums.com/show....php?t=2509590 or
http://rootzwiki.com/topic/107098-ro...the-first-ota/
Connecting over telnet, and run Stage1 with this command:
Code:
dalvikvm -cp /sdcard/SlapMyMoto.jar SlapMyMoto
When the device tells you to reboot, do this manually with "adb reboot" or your power button. It will not auto reboot on this step
Step3)
Once the device has rebooted, run Impactor again and connect over telnet just like in the previous step, then run the same command
Code:
dalvikvm -cp /sdcard/SlapMyMoto.jar SlapMyMoto
Once the device has rebooted, please take the 4.4 OTA.
Step4)
Now that we are on 4.4, we can finish the process with adb shell:
Code:
adb shell
cp /sdcard/install.sh /data/local/tmp/install.sh
chmod 755 /data/local/tmp/install.sh
echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
Then either wait, or toggle your bluetooth. Once the device reboots, you will have root.
Some times you have to manually reboot your device and also manually install SuperSU from the market place