[Q] Rooted Huawei ascend P6 bricked

Search This thread

kabatinouguy

Member
Jan 10, 2014
5
0
Brisbane
After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying

This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload

Huawei SD card update fail.......
cust copying files....
copy cust file successed

FAIL

Please help
 
Last edited:

raolleel

Senior Member
Nov 19, 2008
237
131
Wuppertal
After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying

This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload

Huawei SD card update fail.......
cust copying files....
copy cust file successed

FAIL

Please help


looks like you have a soft-brick.

Download a Official-Rom, move the Update into the DLOAD-Folder,
go into the original Recovery and let it flash the file.

After this your phone should be starting normally.
 
  • Like
Reactions: kabatinouguy

nARDOs

Senior Member
Apr 2, 2013
386
28
After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying

This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload

Huawei SD card update fail.......
cust copying files....
copy cust file successed

FAIL

Please help


which app is that
 
  • Like
Reactions: kabatinouguy

jimbo77

Inactive Recognized Contributor
Nov 2, 2010
2,191
2,948
Guatemala
Samsung Galaxy S23 Ultra
This happened to me yesterday as well, I was about to restore apps using TB but the phone frooze and then anything made it boot. I don't know how Exactly I solved it but all I did was:

1.- Flash TWRP v3.01
2.- Wipe all the phone, including system, data, cust and internal sd
3.- From within TWRP flashed STock boot and recovery for 118CN FW.
4.- Placed 118CN UPDATE.APP in external sd/dload
5.- from within TWRP still, rebooted the phone to recovery.
6.- The phone started to flash the update from external SD.
7.- It succeded to flash files but couldn't mount /sdcard so I repeated steps above once more
8.- from stock recovery wipe/factory reset
9.- Tried the update again and voila! Phone succeded and booted just fine... Now it's been running with no issues since 2 days :D :D

I was running 118CN FW and a test kernel with some "non tested" or unstable features which I think forced the phone to frooze and then the data corruption...
 

kabatinouguy

Member
Jan 10, 2014
5
0
Brisbane
looks like you have a soft-brick.

Download a Official-Rom, move the Update into the DLOAD-Folder,
go into the original Recovery and let it flash the file.

After this your phone should be starting normally.

Thanks mate my phone is working again........it took me a long time to figure out how to do flashing and everything because I am a beginner but after doing a lot of reading and watching utube I finally have some basic knowledge on unbricking a phone....Thanks again for your information it really helps me alot....:) :) :)
 

ken897

New member
Sep 6, 2009
2
0
huawei p6

hi i did the same putting official firmware in d load and installed and i rebooted it wright?

---------- Post added at 11:09 AM ---------- Previous post was at 11:04 AM ----------

hi can anyone help my huawei p6 is stuck to the logo


This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload

Huawei SD card update fail.......
cust copying files....
copy cust file successed

FAIL

Please help
 

blueIBI

Senior Member
Jun 9, 2012
478
106
This happened to me yesterday as well, I was about to restore apps using TB but the phone frooze and then anything made it boot. I don't know how Exactly I solved it but all I did was:

1.- Flash TWRP v3.01
2.- Wipe all the phone, including system, data, cust and internal sd
3.- From within TWRP flashed STock boot and recovery for 118CN FW.
4.- Placed 118CN UPDATE.APP in external sd/dload
5.- from within TWRP still, rebooted the phone to recovery.
6.- The phone started to flash the update from external SD.
7.- It succeded to flash files but couldn't mount /sdcard so I repeated steps above once more
8.- from stock recovery wipe/factory reset
9.- Tried the update again and voila! Phone succeded and booted just fine... Now it's been running with no issues since 2 days :D :D

I was running 118CN FW and a test kernel with some "non tested" or unstable features which I think forced the phone to frooze and then the data corruption...


how did you manage to flash the stock boot.img and recovery inside twrp???
 

ken897

New member
Sep 6, 2009
2
0
huawei

hi thanks how do you flash with trwp? cause i am not that expert please cant use my phone
thanks
 

blueIBI

Senior Member
Jun 9, 2012
478
106
ahhhh..

sry ;)

but i can't even install a rom by using the adb sideload command..it fails because of "file_getprop: failed to stat "/system/build.prop": No such file or directory"

what can i do now?

tried to reload the B510..

should i try with a custom ROM?
 
B

BeyondTheHorizon

Guest
ahhhh..

sry ;)

but i can't even install a rom by using the adb sideload command..it fails because of "file_getprop: failed to stat "/system/build.prop": No such file or directory"

what can i do now?

tried to reload the B510..

should i try with a custom ROM?

Flash through adb stock recovery. Extract your sdcard, create on it dload folder using your PC/Laptop. In dload folder put the update.app of the ROM you want and insert back in the device the sdcard. Press volume up + volume down + power button until the HUAWEI logo appears, after that release all the buttons and the phone will start to update the firmware.
 

blueIBI

Senior Member
Jun 9, 2012
478
106
Thanks beyond..

Got it finally again..
But it was very tricky..
Had to usw the b507 by reyncla (thanks for sharing)..
I let this for now in my phone..

I tried the Method you mentioned..but i could not reach the phone by ADB directly (in twrp via ADB sideload it worked finally)..

Thanks for answering..maybe i switch sometime back to the b510 or to the official release (when it comes)..


Sent from my P6-U06 using XDA Free mobile app
 
B

BeyondTheHorizon

Guest
Thanks beyond..

Got it finally again..
But it was very tricky..
Had to usw the b507 by reyncla (thanks for sharing)..
I let this for now in my phone..

I tried the Method you mentioned..but i could not reach the phone by ADB directly (in twrp via ADB sideload it worked finally)..

Thanks for answering..maybe i switch sometime back to the b510 or to the official release (when it comes)..


Sent from my P6-U06 using XDA Free mobile app

Great. Enjoy.
 

SaZoMi

Member
Jun 7, 2014
19
0
Hi,
Probably after select something wrong in TouchRecoveryInstaller-v1_01 i cant start my phone any more.

- PC don't recognize usb via cable
- sd card not detected (apply update from external storage) appears ../ (E:failed to mount /sdcard (No such file of directory).
- wipe data/factory rese - does not help.
- reboot system now - blocks on logo HUAWEI Ascend


Each expert suggestion and idea is welcome and thank you.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    This happened to me yesterday as well, I was about to restore apps using TB but the phone frooze and then anything made it boot. I don't know how Exactly I solved it but all I did was:

    1.- Flash TWRP v3.01
    2.- Wipe all the phone, including system, data, cust and internal sd
    3.- From within TWRP flashed STock boot and recovery for 118CN FW.
    4.- Placed 118CN UPDATE.APP in external sd/dload
    5.- from within TWRP still, rebooted the phone to recovery.
    6.- The phone started to flash the update from external SD.
    7.- It succeded to flash files but couldn't mount /sdcard so I repeated steps above once more
    8.- from stock recovery wipe/factory reset
    9.- Tried the update again and voila! Phone succeded and booted just fine... Now it's been running with no issues since 2 days :D :D

    I was running 118CN FW and a test kernel with some "non tested" or unstable features which I think forced the phone to frooze and then the data corruption...
    1
    After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying

    This phone is LOCK state.
    E:failed to mount/sdcard (No such file or directory)
    There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload

    Huawei SD card update fail.......
    cust copying files....
    copy cust file successed

    FAIL

    Please help


    looks like you have a soft-brick.

    Download a Official-Rom, move the Update into the DLOAD-Folder,
    go into the original Recovery and let it flash the file.

    After this your phone should be starting normally.
    1
    After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying

    This phone is LOCK state.
    E:failed to mount/sdcard (No such file or directory)
    There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload

    Huawei SD card update fail.......
    cust copying files....
    copy cust file successed

    FAIL

    Please help


    which app is that
    1
    From what i can remember I think it SUPER USER

    Which rooting methode did u use to root ur phone?
    1
    I use ROOT WIZARD method....

    I used eROOT method with HiSuite.
    Has never had issues.
    Are u on B118cn ?