[D2G] [Cook] N.HA VENUS RC5 Gingerbread 2.3(1/19/2012)

PlutoHades · Sep 26, 2011

Very Good Rom

deepak_gen · Oct 7, 2011

** Struck at boot screen (red logo) after updating VenusX 3.2 Gingerbread version **

Even I had this issue today while updating this custom rom. But got it resolved.

Had to boot to recovery mode and

1) wipe data / factory reset and once done chose
2) reboot system now .
Note: If camera button does not respond / work, use the enter button on the Keyboard.

After reboot.. Please be patient.

It will take a while before it comes to the main screen.

If you get activation screen. (Emergency Dial & choose Language option)
Bypass it by tapping the screen on the top left, top right, lower right, lower left (in this order).

I have tested the mobile using a GSM sim as well..

Hope this helps...

wrath663 · Oct 7, 2011

Im stuck at the motorola logo with the bee. Im new to motorola phonse so Im not sure how to fix this.

wrath663 · Oct 8, 2011

deepak_gen said:
** Struck at boot screen (red logo) after updating VenusX 3.2 Gingerbread version **

Even I had this issue today while updating this custom rom. But got it resolved.

Had to boot to recovery mode and

1) wipe data / factory reset and once done chose
2) reboot system now .
Note: If camera button does not respond / work, use the enter button on the Keyboard.

After reboot.. Please be patient.

It will take a while before it comes to the main screen.

If you get activation screen. (Emergency Dial & choose Language option)
Bypass it by tapping the screen on the top left, top right, lower right, lower left (in this order).

I have tested the mobile using a GSM sim as well..

Hope this helps...

how did you get to clockwork after coldboot?

deepak_gen · Oct 8, 2011

wrath663 said:
how did you get to clockwork after coldboot?

Background:
Had some issues related to GSM. So I decided to update to .607 GB update.
After GB update, Used D3 rooting method (PetesMotorolaRootTools_v1.06.zip)
Installed Droid 2 Recovery Bootstrap v1.0.0.3
Copied VenusX D2G 3.2 to SD card.

Booted into recovery by holding "power + X (on the key board)"
Updated VenusX D2G 3.2 but got struck @ red logo after the reboot.

Again booted to recovery mode "power + X (on the key board)" and performed
1) wipe data / factory reset
2) reboot
(use the volume keys to move around options and camera button to chose.)
Note: If camera button does not respond / work, use the enter button on the Keyboard.

Sorry Forgot to mention: When you are struck remove the battery. wait for few seconds and put it back. Start the phone Holding down the "X" key on the keyboard.
If you are in a different screen Try pressing the search button / volume buttons..
Sorry dont remember the exact sequence.. Hope this helps

seventieslord · Oct 10, 2011

what will I like about this rom? what would I miss about Fission or CM7? What is different about it? any comments on what it does better than the above roms, or what it could improve on?

D2GxNiNjA · Oct 10, 2011

WTF

Stuck at the M splash with the Bee like everyone else mostly.
Cant even sbf because of it autobooting every 5 seconds so it turns off in bootloader (no text) and shows the Splash Screen again.

chuckweiss2 · Oct 14, 2011

big problem

Not that it's new, but I'm stuck at the red M.

The new part is that there seems to be nothing I can do. I can boot into recovery, which doesn't really do me any good because I can't get a computer to recognize a usb connection to sbf back. Is there something I might have done wrong?

kurpter · Oct 14, 2011

for the fix, read this thread, using the comments from me on there.

http://xdaforums.com/showthread.php?t=1263722

chuckweiss2 · Oct 14, 2011

Awesome!

Hey, thanks a whole lot for the tip, it saved me from having nothing but an impressive conversation piece/ paperweight.

kurpter · Oct 14, 2011

So my old thread tips helped you? What rom you going to put on?

Down forget to 'thank' me if I did help you.

chuckweiss2 · Oct 14, 2011

Absolutely helped, and I just intended to give this one a second shot. Any other suggestions?

kurpter · Oct 15, 2011

once you have a fresh install of 2.3 stock, just install venus from the recovery menu, it will install fine.

D2GxNiNjA · Oct 20, 2011

kurpter said:
once you have a fresh install of 2.3 stock, just install venus from the recovery menu, it will install fine.

i forgot to sbf (too eager)
i installed VenusX on my D2g and got stuck at the Splash.
i tried to sbf but my bootloader is blank when it gets to it.
what do i do?
Windows and RSD dont even notice my phones plugged in.

jdmDA9 · Oct 23, 2011

D2GxNiNjA said:
i forgot to sbf (too eager)
i installed VenusX on my D2g and got stuck at the Splash.
i tried to sbf but my bootloader is blank when it gets to it.
what do i do?
Windows and RSD dont even notice my phones plugged in.

try uninstalling RSD lite and then reinstalling it. thats how I finally got my system to recognize the phone. also, changing USB ports and running as administrator might not hurt trying out too.

ngocha2006 · Oct 23, 2011

Update VenusX RC1

cloixx · Oct 24, 2011

RC1 installed.
VenusX 2.3 battery life was 50% (3d 17h) in GSM + WiFi always On. Perfect 720p video. No issues.
Thank you for your hard work!

kurpter · Oct 24, 2011

the link is dead!

zaferalm · Oct 25, 2011

Before the install .zip file (VenusX RC1.zip) Which version .sbf file should i flash with rsdlite? Where can i download that .sbf?

Which program should i use to root? i dont know how to use ADB.Does superoneclick work?

i gotta use Droid 2 Recovery Bootstrap to install VenusX D2G RC1.zip? is it correct recovery program for D2G?

Sorry for my poor english.Thanks for r understanding.

---------- Post added at 10:30 PM ---------- Previous post was at 10:00 PM ----------

zaferalm said:
Before the install .zip file (VenusX RC1.zip) Which version .sbf file should i flash with rsdlite? Where can i download that .sbf?

Which program should i use to root? i dont know how to use ADB.Does superoneclick work?

i gotta use Droid 2 Recovery Bootstrap to install VenusX D2G RC1.zip? is it correct recovery program for D2G?

Sorry for my poor english.Thanks for r understanding.

Step by step (Quoted from another forum)

~.SBF'd back to .330
~.Rooted via z4, installed CRM, and D2 Bootstrapper
~.Installed update.zip for gingerbread .608.
~.Double checked that the system info matched the requirements
~.Installed VenusX D2G RC1.zip

what is CRM? i dont understand only this step (installed CRM)

die_dmitriy · Oct 30, 2011

There is a Russian translation?

[D2G] [Cook] N.HA VENUS RC5 Gingerbread 2.3(1/19/2012)

Member

New member

Member

Member

New member

Senior Member

Member

Member

Senior Member

Member

Senior Member

Member

Senior Member

Member

New member

Member

New member

Senior Member

Member

Member

Similar threads

Top Liked Posts