Hi Guys not trying to scare anyone couldnt post in developers section, so brought it out here.
Was running RevolutionHD 4.1.5 and wanted to use the 2-way phone recorder.
so installed Bricked-Kernel v1.4r1 installed the radio and cleared dalvik cache and installed system tuner pro so I could underclock 50%.
I noticed it was getting very hot right bottom side under sd microSD card and the screw at right bottom was 70c plus. So I am leaning towards graphics chip being over clocked to far and damaging the connector.
The screen faded to black so i turned it off pulled battery let it cool down and tried a reboot.
System boots and buttons are responsive, no screen , backlights are there.
heat build up is quick and really hot.
Also just connecting the battery, it lights up and starts generating heat.
but still can be booted.
I did under clock and set to boot but did not try to undervolt and set to boot.
Not angry or blaming anyone --->> show-p1984
just putting it out there as a report kinda thing.
Was running RevolutionHD 4.1.5 and wanted to use the 2-way phone recorder.
so installed Bricked-Kernel v1.4r1 installed the radio and cleared dalvik cache and installed system tuner pro so I could underclock 50%.
I noticed it was getting very hot right bottom side under sd microSD card and the screw at right bottom was 70c plus. So I am leaning towards graphics chip being over clocked to far and damaging the connector.
The screen faded to black so i turned it off pulled battery let it cool down and tried a reboot.
System boots and buttons are responsive, no screen , backlights are there.
heat build up is quick and really hot.
Also just connecting the battery, it lights up and starts generating heat.
but still can be booted.
I did under clock and set to boot but did not try to undervolt and set to boot.
Not angry or blaming anyone --->> show-p1984
just putting it out there as a report kinda thing.