can this be use with other device? if not is there any for niki device like this, i want to reset my call timer in my niki. ty.
OK, I had done some researches on how to repair bad blocks and how to reset call timer on my Herm. There are many threats asking the same questions but the answers seem not very clear. I tried to read all related threads and tried many times for two days to solve these issues (perhaps I am not clever enought - that's why it took two days), I finally had done it. This is not a new thing but I just would like to make it easier for those who are not sure how to solve these problems yet. Just ignor it if this is not helpful or mod can feel free to delete ths threat.
Please note that this is not the only way to solve it, you may want to share if you have better ideas.
1. How to check and repair bad block
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Downloan Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.
That's what I had done and solved...
2. How to reset call timer (if you want to know reason why you want to do this, please do additional research)
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Make sure that you have SPL 1.10 Olipro (this one works for me, higher version seems not work)
c). Downloan Mtty.exe file in the attachment below and save it to your computer.
d). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
e). Put your divice into Bootloader mode and connect to your PC via USB
f). Run Mtty.exe from your PC
g). Selec "USB" in port box and then click OK
h). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
i). Type "rtask b" and Enter then it should show result "0"
j). then type "ate1" and Enter then it should show result "0"
k).then type "atv1" and Enter then it should show result "OK"
l). then type "at@talk=270f,270f" and Enter then it should show result "OK"
Restart you PPC.... you call timer should be 00.00.00
Enjoy!!!
Sorry if you can not understand my English very well
Edit: please feel free to make correction if there's something wrong or i am missing, but I followed this and got sucessful.
DO THIS AT YOUR OWN RISK!!!
This is the Hermes section of the forum. The Touch HD ISN'T a Hermes...
OK, I had done some researches on how to repair bad blocks and how to reset call timer on my Herm. There are many threats asking the same questions but the answers seem not very clear. I tried to read all related threads and tried many times for two days to solve these issues (perhaps I am not clever enought - that's why it took two days), I finally had done it. This is not a new thing but I just would like to make it easier for those who are not sure how to solve these problems yet. Just ignor it if this is not helpful or mod can feel free to delete ths threat.
Please note that this is not the only way to solve it, you may want to share if you have better ideas.
1. How to check and repair bad block
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Downloan Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.
That's what I had done and solved...
2. How to reset call timer (if you want to know reason why you want to do this, please do additional research)
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Make sure that you have SPL 1.10 Olipro (this one works for me, higher version seems not work)
c). Downloan Mtty.exe file in the attachment below and save it to your computer.
d). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
e). Put your divice into Bootloader mode and connect to your PC via USB
f). Run Mtty.exe from your PC
g). Selec "USB" in port box and then click OK
h). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
i). Type "rtask b" and Enter then it should show result "0"
j). then type "ate1" and Enter then it should show result "0"
k).then type "atv1" and Enter then it should show result "OK"
l). then type "at@talk=270f,270f" and Enter then it should show result "OK"
Restart you PPC.... you call timer should be 00.00.00
Enjoy!!!
Sorry if you can not understand my English very well
Edit: please feel free to make correction if there's something wrong or i am missing, but I followed this and got sucessful.
DO THIS AT YOUR OWN RISK!!!
I have the same request!!!this guide works on xperia ray?. I have a bad block in my nand flash. I can not flash a custom kernel on my xperia ray