[GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter

Search This thread

emme1

Senior Member
Nov 10, 2012
110
22
R: [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Coun

thankyou very much!
At the moment I can't try it because I have this cursed 9070p.
When I will have the firm for my model I will test this method certainly!
________________________
Inviato dal mio☆Pimped☆GT-I9070P con Tapatalk 2
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa
 

shut_down

Senior Member
Sep 26, 2010
7,764
3,551
Belgrade
Samsung Galaxy S21 FE
thankyou very much!
At the moment I can't try it because I have this cursed 9070p.
When I will have the firm for my model I will test this method certainly!
________________________
Inviato dal mio☆Pimped☆GT-I9070P con Tapatalk 2
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa

Most likely that root method Shaaan provided would work on any JB for our phone. :D;)
 
  • Like
Reactions: emme1

emme1

Senior Member
Nov 10, 2012
110
22
R: [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Coun

Really?
I have some doubt with the compatibility with kies...
But I am not an expert developer and it is only a supposition...
Thankyou everybody for the lesson! ;)

________________________
Inviato dal mio☆Pimped☆GT-I9070P con Tapatalk 2
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa
 

shut_down

Senior Member
Sep 26, 2010
7,764
3,551
Belgrade
Samsung Galaxy S21 FE
Really?
I have some doubt with the compatibility with kies...
But I am not an expert developer and it is only a supposition...
Thankyou everybody for the lesson! ;)

________________________
Inviato dal mio☆Pimped☆GT-I9070P con Tapatalk 2
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa

Kies was not working when you have custom kernel/ROM on GB too. So it only works on stock. And usb debuging must be off, and for root you need it on.

;)
 
  • Like
Reactions: emme1

emme1

Senior Member
Nov 10, 2012
110
22
R: [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Coun

With the root of this thread, when USB debug is disabled kies work perfectly
________________________
Inviato dal mio☆Pimped☆GT-I9070P con Tapatalk 2
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa
 

shut_down

Senior Member
Sep 26, 2010
7,764
3,551
Belgrade
Samsung Galaxy S21 FE
Одг: [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Co

With the root of this thread, when USB debug is disabled kies work perfectly
________________________
Inviato dal mio☆Pimped☆GT-I9070P con Tapatalk 2
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa

Phone is rooted when you put file "su" in folder system/bin. So it is same you did it this way, or any other.

Послато са GT-I9070 користећи Тапаток 2
 
  • Like
Reactions: emme1

emme1

Senior Member
Nov 10, 2012
110
22
R: [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Coun

ah! Now I have understand, and if kies work, is probably because any firm have his custom root... I think...

Edit: sorry is not so.
Su is added directly in the stock firmware of the phone so it is not necessary to flash a custom firm by Odin.
Csc, phone, and the other part of the firm remain the same.
Probably kies works if it is correct

Thanks
________________________
Inviato dal mio☆Pimped☆GT-I9070P con Tapatalk 2
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa
 
Last edited:

fluffi444

Senior Member
Nov 19, 2012
1,600
932
Amazon Fire TV
Samsung Galaxy S9+
There is a new JB for RUS available on Samfirmware - Just to let you know...

GT-I9070 - Russia
PDA: I9070XXLPZ
CSC: I9070SERLPZ


Version: 4.1.2
Date: 2013-01-03
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
 

plahoo83

Member
Jun 26, 2012
45
20
Malbork
Odp: [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Co

There is a new JB for RUS available on Samfirmware - Just to let you know...

GT-I9070 - Russia
PDA: I9070XXLPZ
CSC: I9070SERLPZ


Version: 4.1.2
Date: 2013-01-03
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom

O'rly :D

Wysłane z mojego GT-I9070
 

geoemm

Senior Member
Apr 4, 2011
134
7
i have an indian version 9070i. currently running stock non rooted 2.3.6 (DDLD4)..
1)can i use this method to flash JB rom (XXLPY or XXLPZ) without increasing the binary counter(and is there pre rooted version of JB available)
or is there any method to do this, i have read many threads but is unable to find the exact answer with some clarity,sorry for being a noob..
 

SuperLamic

Senior Member
Oct 24, 2011
937
1,081
Prague
i have an indian version 9070i. currently running stock non rooted 2.3.6 (DDLD4)..
1)can i use this method to flash JB rom (XXLPY or XXLPZ) without increasing the binary counter(and is there pre rooted version of JB available)
or is there any method to do this, i have read many threads but is unable to find the exact answer with some clarity,sorry for being a noob..

Read this: http://xdaforums.com/showthread.php?t=2087424 and there http://xdaforums.com/showthread.php?t=208653 Read comments

Sent from my Samsung Galaxy S Advance
 

NHS2008

Senior Member
Jul 24, 2010
1,065
248
Mumbai
Hi friends. Till today I havent messed with my Galaxy S advance i9070. It's on Stock 2.3.6 DDLK2 FW from India.
I have downloaded the corrosponding pre-rooted firmware for it.
I9070DDLK2_I9070ODDLJ1_INU_ROOTED_SUPERSU.rar

I have the Odin and all necessary stuff. What my question is that WILL THIS ERASE MY APPS AND DATA??
Will I lose all my apps and their data if I do this?? I intend to flash JB after this. and only reason I am doing this rooting is to backup my data with TiBackup before going JB.
 

tahapapun

Senior Member
Nov 22, 2012
67
75
Kota di Indonesia
Hi friends. Till today I havent messed with my Galaxy S advance i9070. It's on Stock 2.3.6 DDLK2 FW from India.
I have downloaded the corrosponding pre-rooted firmware for it.
I9070DDLK2_I9070ODDLJ1_INU_ROOTED_SUPERSU.rar

I have the Odin and all necessary stuff. What my question is that WILL THIS ERASE MY APPS AND DATA??
Will I lose all my apps and their data if I do this?? I intend to flash JB after this. and only reason I am doing this rooting is to backup my data with TiBackup before going JB.

Unless you wipe/factory reset your phone, you won't lose any data or apps installed :D

Sent from my GT-I9070 using xda premium
 
  • Like
Reactions: NHS2008

shut_down

Senior Member
Sep 26, 2010
7,764
3,551
Belgrade
Samsung Galaxy S21 FE
Hi friends. Till today I havent messed with my Galaxy S advance i9070. It's on Stock 2.3.6 DDLK2 FW from India.
I have downloaded the corrosponding pre-rooted firmware for it.
I9070DDLK2_I9070ODDLJ1_INU_ROOTED_SUPERSU.rar

I have the Odin and all necessary stuff. What my question is that WILL THIS ERASE MY APPS AND DATA??
Will I lose all my apps and their data if I do this?? I intend to flash JB after this. and only reason I am doing this rooting is to backup my data with TiBackup before going JB.

You just do not do factory reset. But there is chance your phone will not boot untill you do factory reset, you can try. All apps will be gone after factory reset. And data from internal memory (that 3.9GB) will not be deleted.

Sent from Galaxy S Advance
 

Top Liked Posts

  • There are no posts matching your filters.
  • 87
    DISCLAIMER:


    I'm NOT responsible for any damage you cause to your phone.
    Be sure to follow the steps correctly.



    REQUIREMENTS:
    • Windows

    • Samsung KIES and all drivers installed.

    • ODIN for flashing the firmware.



    HOW TO ROOT:
    1. Download the Pre-Rooted firmware that matches the firmware your using.


    2. Extract the RAR file, you will end up with a folder with two files in it.
      SYSTEM_YOURFIRMWARE.tar.md5 and CSC_YOURFIRMWARE.tar.md5


    3. Close any KIES application that might be open.


    4. Open ODIN.


    5. Select the file SYSTEM_YOURFIRMWARE.tar.md5 as PDA.


    6. Select the file CSC_YOURFIRMWARE.tar.md5 as CSC.


    7. Verify that ONLY "AUTO REBOOT" and "F. RESET TIME" are selected.
      Do NOT select "Repartition"


    8. Boot your phone in "DOWNLOAD MODE" by holding POWER + HOME + VOL. DOWN


    9. Plug your phone usb cable to your computer.
      If you've never connected your phone to your computer in download mode you'll have to wait for it to install the drivers


    10. Click the "START" button and wait for it to finish.
      Do NOT unplug the usb cable before ODIN finishes its job.


      If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
      Then you can remove the usb cable.
      Your device will reboot in Recovery Mode and will finish the installation.
      When it finishes, it will reboot and start the Android System.



    11. Now, go to the "Google Play Store" and Install the app "Super SU" (or "Superuser").





    That's it! :good:
    Now, enjoy your rooted Galaxy S Advance! :cool:
    You can go back to Download Mode to check that your Binary Counter hasn't increased.



    DONATIONS:
    Consider making a donation,
    It helps support developers so they can keep doing a great job!
    Donate via Paypal :good:
    38
    GT-I9070 Rooted Firmwares:


    REGION: ARO (Argentina) | PDA: I9070UBLD1 | CSC: I9070UVOLD1
    DOWNLOAD

    REGION: AUT (Switzerland) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
    DOWNLOAD

    REGION: CHL (Claro Chile) | PDA: I9070UBLD4 | CSC: I9070CHLLE3
    DOWNLOAD

    REGION: CHO (Chile) | PDA: I9070UBLD4 | CSC: I9070CHOLE1
    DOWNLOAD

    REGION: CNX (Vodafone RO) | PDA: I9070XXLF4 | CSC: I9070CNXLC1
    DOWNLOAD

    REGION: COA (Cosmote Romania) | PDA: I9070XXLD1 | CSC: I9070OXFLC2
    DOWNLOAD

    REGION: DBT (Germany) | PDA: I9070XXLD1 | CSC: I9070DBTLC1
    DOWNLOAD

    REGION: EUR (Greece) | PDA: I9070XXLD3 | CSC: I9070XXLD4
    DOWNLOAD

    REGION: HUI (H3G Italy) | PDA: I9070NELH2 | CSC: I9070HUILH2
    DOWNLOAD

    REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
    DOWNLOAD

    REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
    DOWNLOAD

    REGION: ITV (Italy) | PDA: I9070XXLD3 | CSC: I9070ITVLD1
    DOWNLOAD

    REGION: LUX (Luxemburg) | PDA: I9070XXLD1 | CSC: I9070LUXLC1
    DOWNLOAD

    REGION: NEE (Nordic Countries) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
    DOWNLOAD

    REGION: OMN (Vodafone IT) | PDA: I9070BULE2 | CSC: I9070OMNLE1
    DOWNLOAD

    REGION: OXA (Open Europe) | PDA: I9070XXLD1 | CSC: I9070OXALD1
    DOWNLOAD

    REGION: OXX | PDA: I9070XXLE2 | CSC: I9070OXXLD4
    DOWNLOAD

    REGION: PRT (Play PL) | PDA: I9070XXLF4 | CSC: I9070PRTLF1
    DOWNLOAD

    REGION: SWC (Swisscom CH) | PDA: I9070BULE2 | CSC: I9070SWCLC1
    DOWNLOAD

    REGION: TCE (Mexico) | PDA: I9070UBLD1 | CSC: I9070TCELC1
    DOWNLOAD

    REGION: TCL (Vodafone PT) | PDA: I9070XXLE2 | CSC: I9070TCLLE1
    DOWNLOAD

    REGION: TRA (Croatia) | PDA: I9070XXLD3 | CSC: I9070OXFLE1
    DOWNLOAD

    REGION: TTT (Trinidad and Tobago) | PDA: I9070UBLD1 | CSC: I9070UUBLC1
    DOWNLOAD

    REGION: UFN (Movistar AR) | PDA: I9070VSLD1 | CSC: I9070TFGLD1
    DOWNLOAD

    REGION: XEO (Poland) | PDA: I9070XXLD1 | CSC: I9070XXLD1
    DOWNLOAD

    REGION: XME (Malaysia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: XSE (Indonesia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: XTC (Sun Philippines) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
    DOWNLOAD










    Requests Suspended till JB ROM is released!

    root your phone before making the ota update and the root will remain.

    do not use kies to update the phone.
    17
    GT-I9070P (NFC Version) Rooted Firmwares:



    REGION: ATO (Open Austria) | PDA: I9070PXXLD4 | CSC: I9070PATOLE1
    DOWNLOAD

    REGION: DBT (Germany) | PDA: I9070PXXLD2 | CSC: I9070PDBTLD2
    DOWNLOAD

    REGION: SEB (Baltic) | PDA: I9070PXXLD4 | CSC: I9070PSEBLD1
    DOWNLOAD

    REGION: TIM (TIM Italy) | PDA: I9070PAILE1 | CSC: I9070PTIMLD1
    DOWNLOAD

    REGION: TMU (T-Mobile UK) | PDA: I9070PBVLF1 | CSC: I9070PTMULE1
    DOWNLOAD

    REGION: TMZ (T-Mobile CZ) | PDA: I9070PBOLE2 | CSC: I9070PTMZLE2
    DOWNLOAD

    REGION: TPL (T-Mobile PL) | PDA: I9070PBOLE2 | CSC: I9070PTPLLE3
    DOWNLOAD

    REGION: VDH (Hungary) | PDA: I9070PBXXLE1 | CSC: I9070PVDHLE1
    DOWNLOAD


    8
    I did root more firmwares,
    I just need some time to upload them.
    I'll upload them tonight.
    7
    okay guys,
    now I have 10 requests for the I9070 and 7 for the I9070P (that's around 5gb for me to download and then upload)
    but I'll start uploading them today

    Code:
    I9070
    1.  XSE DXLD1 LBLD1
    2.  EUR XXLD3
    3.  CNX XXLF4 CNXLC1
    4.  CHO UBLD1 CHOLD4
    5.  XTC DXLD1 OLBLD1
    6.  TRA XXLD3
    7.  XME DXLD1 OLBLD1
    8.  INU DDLJ1 ODDLJ1
    9.  PRT XXLF4 PRTLF1
    10. TCE UBLD1
    
    + 7 more I9070P firmwares

    please wait for me to upload these before making more requests



    Alright. Thanks so much.

    Certo, muito obrigado.:laugh:

    CHO reuploaded. please test the new link.