Youtube HD works on the NC with version 2.1.6.
Attached for your convenience..
But when you update the You Tube, the problem comes back, can't play HD videos again, guess the temporary solution is not to update You Tube?
Youtube HD works on the NC with version 2.1.6.
Attached for your convenience..
But when you update the You Tube, the problem comes back, can't play HD videos again, guess the temporary solution is not to update You Tube?
Two errors that I am getting now. I cannot mount emmc to my pc and always was able to mount sd and emmc to pc before. And I am getting the following error when updating or installing some apps "couldn't install on usb storage or sd card" I tried http://www.androidpolice.com/2011/0...on-usb-storage-or-sd-card-problem-on-android/ . What seems to work is unmounting the sd installing/updated the problem program and then mounting the sd...but it is a pain.
I've had this error a couple of times in the last week or so. Both times I found that the SD card had been marked read-only some how. I used Root Explorer to switch it back to read-write and problem solved.
But no idea how it got read-only in the first place.
But when you update the You Tube, the problem comes back, can't play HD videos again, guess the temporary solution is not to update You Tube?
Yup for some reason you have to use the older YouTube. I've been using 2.1.6 for almost a year.
BTW it's not HD that the NC can play. It's "HQ" (480p AFAIK). The default is probably 360p or 240p. NC's TI video DSP can't play 720p.
Version 2.3.4 that frankusb posted allows me to connect to my account and also watch HQ videos by default. Good looking out, frank!
Does it have the Watch It Later feature? That's the one thing I miss when using the older version.
Do you have it plugged in? I noticed that screen never goes off if I'm charging unless I press the power button, same with shut down/reboot while its charging.
I have updated MiRaGe with the new build. Please see OP for details and download links.
As always thanks to dalingrin, fattire, keyodi, and all of the CM/AOSP developers for this rom.
[B]Updates:[/B]
[U]07/27/2013:[/U]
- Android security fix 8219321 (CYAN-1602) to Bluebox security bug merged
- Updated ADW Launcher
[U]05/13/2013:[/U]
- Optimized kernel configuration by removing unused features
- Removed debugfs for security improvement
- Switched to performance optimization
- Updated boot animation
[U]03/28/2013:[/U]
- Synced with CM repo
- updated kernel with the 03282013 build
- removed ro.pm.awake_on_usb enforcement from build.prop
[U]03/10/2013:[/U]
- Synced with CM repo
- updated ADW Launcher
- updated kernel with the 03082013 build
[U]03/08/2013:[/U]
- New kernel update package:
-- cryptography library optimizations (sha1, crc32, aes)
-- use get_random_int() to fix entropy depleting
[U]11/10/2012:[/U]
- Updated ADW Launcher
[U]09/30/2012:[/U]
- Synced with CM
- Updated Cyanoboot
[U]07/30/2012:[/U]
- Reverted the KSM support in the kernel and dalvik-vm
[U]07/27/2012:[/U]
- Modify Running ProcessView as ics in Settings
- Fixing a crash when doing lock profiling in dalvik vm
- Basic [URL="http://review.cyanogenmod.com/#/c/12174/"]KSM Support in dalvik vm[/URL]. This is complementary to the KSM feature added into the kernel build.
- Customizable kill app via back key timeout.
- updated the kernel
-- added [URL="http://www.linux-kvm.org/page/KSM"]KSM[/URL] support. See [URL="http://xdaforums.com/showpost.php?p=29460098&postcount=1595"]this post[/URL] for a patch that will initiate the KSM service.
-- removed several debug configs
[U]07/12/2012:[/U]
- New build, synced with CM
- ICS menu icons
- default to hardware EGL libraries of SGX530 instead of using generic android EGL libraries (thanks to leolawliet)
- new kernel with the following changes
-- use optimized strnlen, strncpy, and crc32 functions in ARM (thanks to faux123)
-- disable several DEBUG settings in kernel config
[U]07/05/2012:[/U]
- New build, synced with CM
- ICS icons for settings.apk and power widget
- new kernel with the following changes
-- BFS 4.04 scheduler added to kernel
-- updates to ashmem, lowmemorykiller, and interactive governor
-- updates to rcutiny and core scheduler components
[U]06/23/2012:[/U]
- New 06232012 build, synced with CM
[U]06/08/2012:[/U]
- New build, synced with CM
- Backported many bug/security fixes from 2.6.32.59 kernel for block layer, file system, networking, bluetooth, ARM architecture, and sound. See my github link above for details.
[U]05/27/2012:[/U]
- New build, synced with CM
- Backported the staging android drivers from kernel 2.6.38.8
- added a fix for uptime overflow in the kernel after a recent report
- added a modified Cyanbread_light theme to replace the orange highlights with cyan/blue that matches with the recent Google Play apps. The source code of Cyanbread_light is [URL="http://www.mediafire.com/?f2deqwh59p355r8"]here[/URL].
[U]05/18/2012:[/U]
- New build, synced with CM
- Integrated the 05112012 build of encore kernel and included Dalingrin's flicker fix by default since many users downloaded it. All of the kernel downloads below include the fix.
- Replaced the bluetooth icon on statusbar with a new one
- Tagged CM7.2 RC2
[U]05/11/2012:[/U]
- The final build of the newly updated kernel is ready with a long list of changes (see the link above). You can download from the link below. The kernel is compiled with gcc-4.6 for better performance.
- There is an important bug fix for busybox in the CM repo. You can patch your ROM with [URL="http://www.mediafire.com/?ee54355codge3xg"]this file[/URL] in the recovery.
[U]05/09/2012:[/U]
- Synced with CM
- Updated the kernel source with B&N 1.4.2 update which brought updated touch screen and accelerometer drivers
- Added Simple I/O scheduler as default and removed BFQ scheduler in the kernel.
- Synced the binary/proprietary blobs in CM repo with B&N 1.4.2 update.
- Removed the 16-bit framebuffer support since 32-bit performance is very good
- Reverted the 68kHz pixel clock to default 48kHz. There is an optional kernel in the download section with Dalingrin's flicker fix included.
- Reverted edge responsiveness workaround since it was not effective and causing more insensitivity at the touchscreen corners
- Reduced the ROM size by ~5MB
[U]05/05/2012:[/U]
- Synced with CM
- Replaced the lock screen clock font with the ICS clock font.
[U]04/16/2012:[/U]
- Synced with CM
- integrated the OOM optimizations, see [URL="http://xdaforums.com/showpost.php?p=24930815&postcount=1004"]this post[/URL] for details
- removed the V6 Supercharger recommendation
[U]04/07/2012:[/U]
- Synced with CM
- transparent notification background
[U]03/30/2012:[/U]
- Updated [URL="http://xdaforums.com/showthread.php?t=1526119"]Cyanoboot[/URL] with 03/28/2012. Thanks to tonsofquestions and fattire
- Synced with CM
[U]03/23/2012:[/U]
- Added [URL="http://xdaforums.com/showthread.php?t=1526119"]Cyanoboot[/URL] (thanks to fattire)
- Synced with CM
[U]03/04/2012:[/U]
- CM 7.2 RC0 -> RC1
- Synced with CM
[U]03/01/2012:[/U]
- Synced with CM
[U]02/25/2012:[/U]
- Synced with CM
- Replaced the soft button, battery, WiFi, smiley icons with ICS style icons in GB color.
- Tested the ICS kernel with CM7.2. There were many problems. See [URL="http://xdaforums.com/showpost.php?p=22971427&postcount=710"]this[/URL] post for details.
[U]02/17/2012:[/U]
- Synced with CM
[U]02/10/2012:[/U]
- Synced with CM
[U]02/01/2012:[/U]
- Synced with CM to include the FC fix with rotation. No Statusbar FC on boot anymore. I had tested this fix earlier and it was not preventing the statusbar FC. Now works, I missed something apparently.
- Built an optional ROM with the full language set. If you don't need any other language than English(US) and Spanish, smaller ROM is recommended.
[U]01/26/2012:[/U]
- Synced with CM to include the rotation animation fix. Thanks to kalltkaffe for this brilliant fix.
- Please upgrade to this build if you are on 01232012 build. No other rotation fix is necessary. We are using unchanged CM7 kernel again without the backported CM9 rotation fix.
- For the ones who want to go back to an earlier build, I had given the links to 01132012 build in [URL="http://xdaforums.com/showpost.php?p=21763348&postcount=459"]this post[/URL].
[U]01/23/2012:[/U]
- Synced with CM
[U]01/13/2012:[/U]
- Synced with CM
[U]01/10/2012:[/U]
- Synced with CM
[U]12/12/2011:[/U]
- Synced with CM
- Switched to modular kernel (see the previous update below), includes the SOD patch, and compiled with linaro 4.5-2011-10 toolchain.
[U]12/05/2011:[/U]
- Based on Dalingrin's encore kernel, built a modular kernel by configuring the uncommonly used features (they are still available) as kernel modules. There seems to be about 20% increase in the free RAM (available to the apps and cache) after first boot on my nook. If you want to try, here is [URL="http://www.mediafire.com/?6ii07g7bgh2273f"]the link[/URL]. See [URL="http://xdaforums.com/showpost.php?p=20048066&postcount=139"]this post[/URL] for more details
[U]12/01/2011:[/U]
- Synced with CM
[U]11/28/2011:[/U]
- Synced with CM
- Dalingrin's kernel with SOD patch included in the build with recompiled kernels using linaro 4.5-2011.10 toolchain since the feedback was positive. The optional files are still downloadable for the ones who want to use them with other builds.
- Updated Superuser.apk to 3.0.7. Market was constantly showing this update.
[U]11/24/2011:[/U]
- Included [URL="http://forum.cyanogenmod.com/topic/32316-sleep-of-death-debugging/page__view__findpost__p__266644"]dalingrin's SOD fix[/URL] in the kernel build.
[U]11/20/2011:[/U]
- CM sync
- Added a flashable zip with Dalingrin's Encore kernel recompiled with Linaro 4.5-2011.10 toolchain.
[U]11/18/2011:[/U]
- Synced with CM
- Reverted my signal icon fix to include [URL="https://github.com/CyanogenMod/android_frameworks_base/commit/72bd1410dfecbb061d7168af688579fd8da8b935"]Dalingrin's commit[/URL].
- Added back CMStats
[U]11/16/2011:[/U]
Well, everyone is talking about ICS code release but there is another news that [URL="https://github.com/CyanogenMod/android_vendor_cyanogen/commit/9eb9d741524dd596798821dedad43ee68207b955"]CM switched to 7.2.0-RC0[/URL] recently which came with a large number changes. I will not go through all those but you can check them [URL="https://github.com/CyanogenMod/android_frameworks_base/commits/gingerbread"]here[/URL]. I have also updated Roboto font with the improved version in the Android 4.0.1 source release.
[U]11/13/2011:[/U]
- Synced with CM
- Resolved persistent signal bar problem in the status bar. The source of the problem is [URL="https://github.com/CyanogenMod/android_frameworks_base/commit/2ce85e989e66da91dc3c082fbe9bdf030fbd20f5"]this commit[/URL], removed the commit before compiling the code.
- Updated Superuser.apk and su binary
- Removed extra themes,
- Removed CMwallpaper,
- Removed large ring tones,
- Removed and decompiled CMUpdateNotify
- Removed development app,
- Removed all languages except [U][B]English(US) and Spanish[/B][/U]
- Removed ROM Manager, latest version is available in the Market.
- Replaced the system font with the Roboto font from ICS
- The optional status bar transparency theme as a flashable zip, please see the screenshot to decide if you want it.
Any desire to tinker with CM9/AOKP builds? I know you build for personal use, but have you thought about starting an ics rom? Or are you waiting until the 3.0 kernel is fully functional? Your cm7 builds are super solid, just wondering what's holding you back from moving towards ics..