Yep finally i resolved my APN issue, I replace the current JPZ moderm with JPZ modern from overcome rom 2.3.3. Everything is now working.
Ne
[ROM][4.0.4][MTD] CyanogenMod 9.0.0 | READ : http://goo.gl/rkEeh
- Thread starter cdesai
- Start date
- Status
Yep finally i resolved my APN issue, I replace the current JPZ moderm with JPZ modern from overcome rom 2.3.3. Everything is now working.
Ne
It's working but by default not completely configured in settings.
So go to settings and select locations services -> to use GPS + to use internal antenna
Bye,
Derk
Yes, i do that and install a GPS Widget Toogle and reboot, but cannot enable gps.
Tools like GPS Test or GPS Status don't work.
so i have to restock to GB and flash again overcome, ICS Rom and Gapps.
i think, this will resolve my problem.
@update
on first page cdesai wrote: IF coming from a non-MTD ROM, you might need to flash twice
so i try flash only ics first...
Thx for quick response
Last edited:
Nightlies....
The CM9 nightlies, are they MTD or not?
Can I just flash the nightly, check it out, and then flash the te4m build back without losing my settings/data, or do I need to wipe data etc?
It's working but by default not completely configured in settings.
So go to settings and select locations services -> to use GPS + to use internal antenna
Bye,
Derk
The CM9 nightlies, are they MTD or not?
Can I just flash the nightly, check it out, and then flash the te4m build back without losing my settings/data, or do I need to wipe data etc?
TIME FOR REMINDING EVERY ONE
THIS IS A {DEVELOPER THREAD}
STOP POSTING YOUR REVIEWS AND HOW TO DO HERE PLEASE!!!!!!!
PLEASE USE THE DISCUSSION ROOM IN GENERAL SECTION
PLEASE DO NOT REPLY TO ANY QUERIES HERE
FOR LAZY UMPS HERES THE LINK
http://xdaforums.com/showthread.php?t=1473166
THIS IS A {DEVELOPER THREAD}
STOP POSTING YOUR REVIEWS AND HOW TO DO HERE PLEASE!!!!!!!
PLEASE USE THE DISCUSSION ROOM IN GENERAL SECTION
PLEASE DO NOT REPLY TO ANY QUERIES HERE
FOR LAZY UMPS HERES THE LINK
http://xdaforums.com/showthread.php?t=1473166
Help me what to do to flash.
Now I have seen a lot of topics here mentioning the word MTD. and I now know the meaning of that..but what I dont know is how can I flash the new ROMS for example this ROM? and HumberOS Latest 4.04 ICS??
What do I need to make my tab a MTD??? is flashing overcome kernel changes my tabs partition to EXT4 right?? so how can I make it MTD?? please any full steps to install??? now Im on a stock(not rooted).. can anyone help please???
Now I have seen a lot of topics here mentioning the word MTD. and I now know the meaning of that..but what I dont know is how can I flash the new ROMS for example this ROM? and HumberOS Latest 4.04 ICS??
What do I need to make my tab a MTD??? is flashing overcome kernel changes my tabs partition to EXT4 right?? so how can I make it MTD?? please any full steps to install??? now Im on a stock(not rooted).. can anyone help please???
You should be asking this in the discussion thread - naughty, naughty
Look at my post here and you should be fine
--
Thanks for helping. but I can't get it so much. is the latest ROM of HumberOS is a MTD ROM?? Should I be in stock first?then overcome?then Humber OS Lates ROM MTD??is that it??
What are you running currently?
If you are on CM9 (Humberos ROM) you DO NOT NEED to stock IF you go to the build detailed in my other post.
If you are not then I suggest you restock per the original non MTD Humberos CM9 installation and then go to the MTD build.
Now you are making me post repeatedly in this thread and we will both be shunned. Please continue the questions (if there are any
) in the other thread.
Last edited:
Sorry
I am sorry to post here.. I'll stop...and I now installed it successfully...very wel done!!
and so much thanks to you man above me!
I am sorry to post here.. I'll stop...and I now installed it successfully...very wel done!!
and so much thanks to you man above me!
@sbradymobile, jt1134:
My guess is that cm9 nightly builds use koush/proprietary_vendor_samsung and not sgt7/proprietary_vendor_samsung. It probably needs a pull (request) to bring koush in line with sgt7.
Yeah, I just sent a pull request so hopefully the next one will have it.
OK to post this here?
I have a cdma (p1c) gtab. When I build from sgt7 I get a build that boots and works fine. When I build from cm I get a build that hangs (gray screen) after the cat screen. I thought I saw a post (and a merged change) that said the kernel is now being built automatically. Is this only true for p1? I did a repo sync about noon so I should have gotten all of the changes.
Are there more changes for p1c that need to be pushed to cm?
p1c seems to be the bastard stepchild of the gtab family.
I'd be glad to be involved in testing if this will help the p1c builds.
I have a cdma (p1c) gtab. When I build from sgt7 I get a build that boots and works fine. When I build from cm I get a build that hangs (gray screen) after the cat screen. I thought I saw a post (and a merged change) that said the kernel is now being built automatically. Is this only true for p1? I did a repo sync about noon so I should have gotten all of the changes.
Are there more changes for p1c that need to be pushed to cm?
p1c seems to be the bastard stepchild of the gtab family.
I'd be glad to be involved in testing if this will help the p1c builds.
Bootanimation 600x1024
Hi @ALL!
I've just made a bootanimation package with 600x1024 resolution.
4shared
http://www.4shared.com/zip/MO9rR7MM/bootanimation.html
Dropbox
http://db.tt/CgxGUJFi
Ubuntu One
http://ubuntuone.com/7e7iYNkqH7g3Jg9z7kyV9E
Also, I sent it to gerrit review!
http://review.cyanogenmod.com/#/c/14952/
Just copy the zip file to /system/media
Greetings from Brazil!
Hi @ALL!
I've just made a bootanimation package with 600x1024 resolution.
4shared
http://www.4shared.com/zip/MO9rR7MM/bootanimation.html
Dropbox
http://db.tt/CgxGUJFi
Ubuntu One
http://ubuntuone.com/7e7iYNkqH7g3Jg9z7kyV9E
Also, I sent it to gerrit review!
http://review.cyanogenmod.com/#/c/14952/
Just copy the zip file to /system/media
Greetings from Brazil!
Last edited:
No.
p1c seems to be the bastard stepchild of the gtab family.
Huh? You do realize a HUUUUGE portion of the code used for these devices was from me, developed on a cdma device, yes?
Sent from my Galaxy Nexus using XDA
Oops, my bad
Sorry, I meant no disrespect.
I very much appreciate all the hard work you and all the other developers are and have been doing for the GTAB
I hear people talk about how the p1 build from cm is working and since the p1c build from sgt7 works and the build from cm doesn't (for me), I figured there might be some differences.
Again, I meant no disrespect and I very much appreciate your work. I'm VERY glad to hear there are developers with a cdma device and I would be happy to help test, if needed.
Sorry, I meant no disrespect.
I very much appreciate all the hard work you and all the other developers are and have been doing for the GTAB
I hear people talk about how the p1 build from cm is working and since the p1c build from sgt7 works and the build from cm doesn't (for me), I figured there might be some differences.
Again, I meant no disrespect and I very much appreciate your work. I'm VERY glad to hear there are developers with a cdma device and I would be happy to help test, if needed.
At least p1c has nightlies already! hehehehe p1l and p1n not... snif snif.
Did you try the official nightly? That doesn't work? Or building it doesn't work? Links in OP.
The one on get.cm only works if your tab is already in mtd. It seems it has a bml to mtd shell script implemented but doesn't fully work as it errors out when it gets to updater.sh line in updater-script
Sent from my LG-P999 using Tapatalk 2
What he meant was the one on cm site doesn't work but one in this thread from eaut and cdesai links work
Sent from my LG-P999 using Tapatalk 2
if you're trying to build after syncing the main cm manifest, you have to run device/samsung/p1c/extract-files.sh before building or your build will be missing the necessary files from Samsung.
Sent from my Galaxy Nexus using XDA
I haven't been using the nightly. I guess I've gotten addicted to building.
When I build from github.com/sgt7/android.git it works and when I build from github.com/CyanogenMod/android.git it doesn't.
I'm using 'brunch cm_p1c-eng' for both builds. The build from cm gives me the cat screen and then hangs with a gray screen until I long press power to turn it off. I'm booting from the sgt7 build so I assume its already converted to MTD.
Thus my assumption there is something different between the kernel building in sgt7 repository and the cm repository.
I saw
http://review.cyanogenmod.com/#/c/14876/
merged in the cm repository and I'd hoped this would fix my problem, but no joy.
---------- Post added at 03:37 PM ---------- Previous post was at 03:25 PM ----------
That must be it! Post 3 that details how to build doesn't mention that small detail! I've adb'ed to the gtab and I'm running it now.
Does this not need to be done for the sgt7 build? I don't rember doing this for sgt7, but it's been a while since I set that up.
Thanks a again!
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
190Read this, IMPORTANT: http://goo.gl/rkEeh
Code:** These CyanogenMod builds are highly experimental and unsupported. ** ** If one of this builds bricks your phone, kills your cat or causes ** a thermonuclear war, don't point at us. We'll laugh at you. ** You decided to make this modifications to your Tablet. ** ** Please refrain from submitting bug reports for any issues ** you may encounter while running one of these builds. ** ** Submitting bug reports on experimental builds is the leading ** cause of male impotence.
This is a stable Build of the current state of CyanogenMod 9 for the Samsung Galaxy Tab.
CM9 is based on latest AOSP sources plus some useful tweaks and features.
Known issues, Downloads and Screenshots: Post #2
General Discussion thread : SGT7 General
Developer only post : Post #3 (how to build and more)
What is MTD (for epic, but its the same for all Samsung devices - except the ROM links ofcourse) http://xdaforums.com/showthread.php?t=1387334
Please refrain from submitting bug reports for any build not released by us - report em to whom u got the build from
We'll release new builds when we feel like doing so, although we do keep our sources updated all the time!
angel_666
cdesai
humberos
jt1134
koxudaxi
red_rebel
sbradymobile
eaut
Techomancer
Big thanks to Teamhacksung for all their work on the aries, and for all the help
And Ofcourse - the CyanogenMod Team!88
USB Tethering won't work in windows (works in ubuntu, untested on OSX)
Internal sd is /mnt/sdcard, and external is /mnt/emmc
USB Host works with a Y cable as the tab doesn't supply power, doesn't with the standard Samsung Adapter for the new tabs.
Official Nightlies : http://get.cm/
p1 : http://get.cm/?device=p1 [GSM Tabs]
p1c : http://get.cm/?device=p1c [CDMA Tabs]
Modems :
p1 [GSM] : http://goo.gl/EjHq5 (Flash via CWM)
p1c [CDMA] : http://goo.gl/Dhmjl (Flash via Odin)
READ THIS BEFORE FLASHING
^It's for the epic but it's pretty much the same thing except the ROM links, and the only ROMs having MTD now are CM9 based ROMs - no MTD on GB
Only way to revert to a normal ROM now is flashing a stock Samsung ROM by odin (with repartition checked)
How to Flash the above zips :
You need to restock your tab if you are running an old MTD build, (only if /system isn't 406 mb, check it by the command `df system` or use an app (such as root explorer) )
IF you are coming from a FSR (STL/BML) ROM (aka Samsung ROM - anything else than the latest CM9 builds / AOKP builds, i.e. any GB ROM, no need to restock)
IF you are coming from a froyo ROM, you need to flash a stock GB ROM first, follow the guide below :
Restocking :
Follow the team overcome restock guide [http://www.teamovercome.net/p1000/?page_id=17], and completely restock your tab.
Once you've flashed it, reboot into download mode again and flash any kernel with recovery (any non-MTD kernels from humberos.com.br, or this forum, for your tab model)
After you've flashed the kernel, reboot into recovery, and this time, install the zip you just downloaded from CyanogenMod servers.
Install Google Apps if you want (gapps-ics-* from goo.im) [optional]
Reboot and enjoy your tab
Normal install :
You need to have a kernel with CWM Recovery
Get the zip from the above download links
Put the zip on your sdcard, reboot into recovery, and install the zip
It'll reboot a few times during the install, that's normal
44
Sources :
CyanogenMod : https://github.com/CyanogenMod
SGT7 (based off CyanogenMod sources with a few tweaks of our own) https://github.com/sgt7
All device tress (p1, p1c and p1-common) and kernel tress (p1 and p1c) have been merged into the CyanogenMod tree now, if you want to submit a change/patch, use cm code-review [http://wiki.cyanogenmod.com/wiki/Howto:_Gerrit]
How to get the sources :
Setup Android Build Environment (http://source.android.com)
(Type in your name and email address when asked)Code:mkdir ~/cm9 cd ~/cm9 repo init -u git://github.com/CyanogenMod/android.git -b ics
(^^This'll take a while, as ~7GB of sources are downloaded initially)Code:repo sync
How to build :
Replace p1 with p1c for CDMA variants.Code:source build/envsetup.sh cd device/samsung/p1 ; ./extract-files.sh brunch p1
Building may take a long time depending on your machine, might range from a few minutes to many hours
After the build is done, navigate to ~/cm9/out/target/product/p1
The zip you'll be looking for would be update-cm-9.0.0-RC0-p1-UNOFFICIAL-signed.zip
If you want to build just the kernel, type the below commands
Code:source build/envsetup.sh make out/target/product/p1/boot.img
If you want just the kernel - u'll get it in the same folder, boot.img
Flash it with heimdall
heimdall flash --kernel ~/cm9/out/target/product/galaxytab/boot.img --recovery ~/cm9/out/target/product/galaxytab/boot.img
^^The above instructions were for building a clean CyanogenMod build for p1, without any changes we did to the sources (mainly frameworks and some apps)
IF you want to build that, sync from https://github.com/sgt7/android.git instead of CyanogenMod, and then build using the same commands38I got some news!
https://plus.google.com/115013390614274076135/posts/CcmArQkDDXn
Official builds coming soon!
But, till then, i suggest the kangers not to sync, as i'll be changing stuff upstream which might break the build(mainly vendor/samsung, device is now p1 and p1c)
So, dont repo sync until i give a heads up(or remove vendor/samsung from your manifest)
And, don't try to build p1 atm (uploading it in a while) - Can build the good old galaxytab fine, just don't try to build p1 or you'll be on your own (you'll know why soon)37CM9 - Updates
Hi fellows!
Just check it!
http://www.humberos.com.br/p/android-ics.html
ps. Today is my brother birthday!
This is for him!
Greetings from Brazil!
Enjoy!
