[KERNEL] nAa-ics-04 [5/7/12] Custom ICS kernel + CWM Recovery

Search This thread
By:
Advanced…
R

RonAsor

Senior Member
Jul 25, 2011
100
16
ugh... it feels like im screwed, I put the 04 kernel on my x10 mini pro and the touch interface is dead, i cant do anything, not even going into recovery, and the phone isnt recognized under the holding the back key when its off... so no manfunctioner reset for me, seems like its over :S
p.s:SEUS fails to recognize it..
 
Last edited:
R

RonAsor

Senior Member
Jul 25, 2011
100
16
F********* I just realised i flashed x10 mini kernel to my mini pro o_O

It isnt the first time I get the wrong firmware... the pages are all the same and googling it doesnt always bring up the wanted results... bah, I'm giving a last try on SEUS, it seems like its been passing through,

I'll flash U20 version if ill be successful
 
matmutant

matmutant

Senior Member
Mar 17, 2011
3,395
4,743
~/
andrux-and-me.blogspot.com
Moto G
Moto E
RonAsor said:
ugh... it feels like im screwed, I put the 04 kernel on my x10 mini pro and the touch interface is dead, i cant do anything, not even going into recovery, and the phone isnt recognized under the holding the back key when its off... so no manfunctioner reset for me, seems like its over :S
p.s:SEUS fails to recognize it..
Click to expand...
Click to collapse

instead of googling, seek to the thread in the dedicated forum :)

when a wrong kernel is flashed, just reflash the right one, no need to SEUS!
 
  • Like
Reactions: kingnothing189
G

GioGr

Senior Member
Dec 5, 2010
101
13
Xiaomi Poco F1
great rom thx fast

only thing slow is the launcher loading when u press home while @ any app

edit:lol this is the kernel topic
anyway great kernel also :D
 
Last edited:
O

onuris

Senior Member
Mar 10, 2009
116
8
Ok, so
I've unlocked the bootloader on my x10 mini pro following this guide: http://xdaforums.com/showthread.php?t=1254225

Then installed the nAa kernel following this guide: http://xdaforums.com/showthread.php?p=25550442

To finally install the MiniCM9 ICS here.

My issues are:

1. Kind of looks like my phone dont read my sim card (Signal is always with the red cross). I think this happens somewere between the bootloader and the kernel installation but it will be nice if someone can give me any pointer here :D

2. After I install the MiniCM9 (I keep on going regardless of the sim card issue hoping that it will magically get solved or something) the screen is no longer touch. Meaning: No matter where I press nothing happens. The phone is not frozen since when I press the hard buttons I do get response.

So, any help?

Hopefully some kind soul will help me resurrect my phone :p

Just in case I'll repost this message on the other two posts
 
S

SmG67

Senior Member
May 2, 2012
2,128
849
onuris said:
Ok, so
I've unlocked the bootloader on my x10 mini pro following this guide: http://xdaforums.com/showthread.php?t=1254225

Then installed the nAa kernel following this guide: http://xdaforums.com/showthread.php?p=25550442

To finally install the MiniCM9 ICS here.

My issues are:

1. Kind of looks like my phone dont read my sim card (Signal is always with the red cross). I think this happens somewere between the bootloader and the kernel installation but it will be nice if someone can give me any pointer here :D

2. After I install the MiniCM9 (I keep on going regardless of the sim card issue hoping that it will magically get solved or something) the screen is no longer touch. Meaning: No matter where I press nothing happens. The phone is not frozen since when I press the hard buttons I do get response.

So, any help?

Hopefully some kind soul will help me resurrect my phone :p

Just in case I'll repost this message on the other two posts
Click to expand...
Click to collapse

Yes, unlocking your bootloader caused your loss of signal, the only way to get it back is to flash back to stock firmware and relock the bootloader, Hope it comes back that way. (It also means you will not be able to run ICS on your phone)

And secondly, you flashed the firmware for the x10mini on your x10minipro, they've got different digitizers, and thus different drivers for the touchscreen.
 
O

onuris

Senior Member
Mar 10, 2009
116
8
SmG67 said:
Yes, unlocking your bootloader caused your loss of signal, the only way to get it back is to flash back to stock firmware and relock the bootloader, Hope it comes back that way. (It also means you will not be able to run ICS on your phone)

And secondly, you flashed the firmware for the x10mini on your x10minipro, they've got different digitizers, and thus different drivers for the touchscreen.
Click to expand...
Click to collapse

ITS ALIVE!!!!

Thx SmG67 :D

So, there's no chance to get ICS on my mini? :(

There's no way to run nAa neither?

Is there a CNM 2.3.x that I can use?
 
S

SmG67

Senior Member
May 2, 2012
2,128
849
onuris said:
ITS ALIVE!!!!

Thx SmG67 :D

So, there's no chance to get ICS on my mini? :(

There's no way to run nAa neither?

Is there a CNM 2.3.x that I can use?
Click to expand...
Click to collapse

No ICS unless you can get a sim-unlock-code (EMMA/IMEI) from your provider, in which case it will be safe to unlock your bootloader.

For Gingerbread roms on stock kernel: look in the x10minipro development section, you've got more choice in that regard than us x10mini users :) Try MiniCM7Pro by BPaul for Android look and feel, or ArcMiniNxt, for SE look and feel.
 
twins.7

twins.7

Senior Member
Nov 4, 2010
329
68
Please help me :)
I can't go back to ICS kernel 4 after flashing kernel JB with minicm4. i can't enter to recovery.
It always stuck in nAa kernel logo.

I can back to GB kernel, but ICS kernel can't.

any advice?

Thanks
 
Last edited:
ruben21

ruben21

Senior Member
Jan 18, 2012
766
165
cabimas
twins.7 said:
Please help me :)
I can't go back to ICS kernel 4 after flashing kernel JB with minicm4. i can't enter to recovery.
It always stuck in nAa kernel logo.

I can back to GB kernel, but ICS kernel can't.

any advice?

Thanks
Click to expand...
Click to collapse

Re flash the GB kernel whit the flash tool again, the kernel is don't save in a backup and need to be change any time when you install a Rom

Sent from my E10i using xda premium

---------- Post added at 03:48 PM ---------- Previous post was at 03:47 PM ----------
ruben21 said:
Re flash the GB kernel whit the flash tool again, the kernel is don't save in a backup and need to be change any time when you install a Rom

Sent from my E10i using xda premium
Click to expand...
Click to collapse

Or simply return the device to stock kernel

Sent from my E10i using xda premium

---------- Post added at 03:50 PM ---------- Previous post was at 03:48 PM ----------
ruben21 said:
Re flash the GB kernel whit the flash tool again, the kernel is don't save in a backup and need to be change any time when you install a Rom

Sent from my E10i using xda premium

---------- Post added at 03:48 PM ---------- Previous post was at 03:47 PM ----------



Or simply return the device to stock kernel

Sent from my E10i using xda premium
Click to expand...
Click to collapse

Or download the flashtool and the kernel again

Sent from my E10i using xda premium
 
  • Like
Reactions: twins.7
twins.7

twins.7

Senior Member
Nov 4, 2010
329
68
Thank's Ruben, it done.
I can't update to stock because battery drain after boot loop of fail installed ICS kernel.
I back to GB kernel, can access recovery but still boot loop. then I install GB, no more boot loop then install ICS. done

Thank's for your advice
 
You must log in or register to reply here.

Similar threads

nobodyAtall
[KERNEL] 2.6.29.6-nAa-14 [23/8/12] Custom Gingerbread kernel + CWM Recovery
Replies
1K
Views
494K
J
jhun12
nobodyAtall
[KERNEL] 2.6.29.6-nAa-14 [23/8/12] Custom Gingerbread kernel + CWM Recovery
Replies
475
Views
371K
W
wolf6621
BPaul
  • Poll
[ROM] MiniCM7Pro - V21 (For Stock kernel)
Replies
3K
Views
1M
W
worlock123
nobodyAtall
[ROM] MiniCM7-2.2.2 [6/7/13] Gingerbread 2.3.7/CM7.2 unofficial port for the x10mini
Replies
8K
Views
2M
amnher
amnher
nobodyAtall
[KERNEL] 2.6.29.6-nAa-ics-04 [5/7/12] Custom ICS kernel + CWM Recovery
Replies
94
Views
131K
P
pedlo

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 64
    nobodyAtall
    nobodyAtall
    Search no more. This is THE kernel for your ICS X10mini.


    Before unlocking your bootloader, read this thread
    If you brick your device, you are the sole responsible.



    Preface:
    • If you use this kernel on a gingerbread ROM, I will laugh at your noobness
    • If you use this kernel on a stock ROM, it will cook you dinner


    Features:
    • Forked from nAa-11
    • Built with linaro-4.7.1 toolchain
    • Full ICS support
    • CWM-Based Recovery 5.5.0.4
    • Genlock: backported from CAF 3.0
    • Socinfo and internal_power_rail ported from CAF 3.0
    • KGSL version 3.8 (1.2): backported from CAF 3.0 / Latest SE sources
    • netfilter: add xt_qtaguid table support for network statistics
    • netfilter: ported xt_connmark xt_mark xt_quota2 xt_TPROXY from latest SE sources
    • binder: backported from CAF 3.0
    • SmartassV2 bugfixes
    • Bluetooth tethering support
    • ICS ramdisk and related fixes
    • KSM backported from latest SE sources / fixes from CAF 3.0


    FAQ:
    If you have any issues, please read the FAQ thread first: http://xdaforums.com/showthread.php?t=1575831


    Requirements:


    Install:
    • Backup
    • Unlock your bootloader as described here: http://xdaforums.com/showpost.php?p=17384177&postcount=3 or here: http://xdaforums.com/showthread.php?t=1254225
    • Download the kernel ftf file from here and move it to Flashtool\firmwares so that Flashtool can pick it up
    • Flash the kernel via Flashtool
    • Reboot and you should see the kernel boot animation:
      loop20_2000.gif


    Uninstall:
    • Flash back to stock using Flashtool or SEUS.



    Notes:

    Dualtouch:
    • If you want to enable the fake DT by dx (instead of andrej456's which is the default), you have to insert the following line in the /system/etc/hw_config.sh file:
      insmod /system/lib/modules/synaptics_i2c_rmi4_dt.ko
      Click to expand...
      Click to collapse
    • If you want to remove the fake DT altogether, insert the following line in the /system/etc/hw_config.sh file:
      insmod /system/lib/modules/synaptics_i2c_rmi4_no_dt.ko
      Click to expand...
      Click to collapse

    Sources:
    The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
    https://github.com/nobodyAtall/nAa-kernel-ics

    Donate:
    If you are enjoying my work please consider donating: .
    Donations are voluntary but allow me to spend more time on this project.
    ​


    Disclaimer:
    I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!
    ​
    View
    21
    nobodyAtall
    nobodyAtall
    nAa-ics-04 is released! Flash it with MiniCM9-3.0.3 for best experience ;)

    Changelog:
    ### nAa-ics-04
    * Built with linaro-4.7.1 toolchain
    * Ramdisk improvements
    * Tune dirty_background_ratio and vm_dirty_ratio
    * A bit more ram reclaimed
    * Better dual touch for mimmi
    View
    20
    nobodyAtall
    nobodyAtall
    Hi all!

    nAa-ics-03 is released today. Updates / changes for this new kernel:

    ### nAa-ics-03
    * Updated recovery: CWM-Based Recovery 5.5.0.4
    * Latest busybox from ICS sources
    * Some more RAM (185MB total ram reported by ICS)
    * Ramdisk optimizations
    * yaffs2 updates
    * cleancache and support for ext3/4
    * msm_rotator updates
    * Binder bugfixes
    * kgsl impovements and tuning
    * genlock updates

    Remember to flash this with MiniCM9 for best experience ;)

    Enjoy!
    View
    16
    nobodyAtall
    nobodyAtall
    Changelog:

    nAa-ics-04
    • Built with linaro-4.7.1 toolchain
    • Ramdisk improvements
    • Tune dirty_background_ratio and vm_dirty_ratio
    • A bit more ram reclaimed
    • Better dual touch for mimmi

    nAa-ics-03
    • Updated recovery: CWM-Based Recovery 5.5.0.4
    • Latest busybox from ICS sources
    • Some more RAM (185MB total ram reported by ICS)
    • Ramdisk optimizations
    • yaffs2 updates
    • cleancache and support for ext3/4
    • msm_rotator updates
    • Binder bugfixes
    • kgsl impovements and tuning
    • genlock updates

    nAa-ics-02
    • msm_mdp: Ported from CAF 3.0
    • MDP_Y_CBCR_H2V2_ADRENO ported from CAF 3.0
    • kgsl: power management and improvements
    • Pmem support for camera
    • New cool kernel boot animation instead of static logo

    nAa-ics-01
    • Forked from nAa-11
    • Full ICS support
    • Genlock: backported from CAF 3.0
    • Socinfo and internal_power_rail ported from CAF 3.0
    • KGSL version 3.8 (1.2): backported from CAF 3.0 / Latest SE sources
    • netfilter: add xt_qtaguid table support for network statistics
    • netfilter: ported xt_connmark xt_mark xt_quota2 xt_TPROXY from latest SE sources
    • binder: backported from CAF 3.0
    • SmartassV2 bugfixes
    • Bluetooth tethering support
    • ICS ramdisk and related fixes
    • KSM backported from latest SE sources / fixes from CAF 3.0
    View
    16
    nobodyAtall
    nobodyAtall
    nAa-ics-02 download link is up!

    Enjoy :)
    View

New posts