Yeah I know it's almost the same tut like ganeshp's tut Juopunutbear S-OFF
by the way, I just mixed it with Flow-Wolf's Unlock, S-OFF ,Root. This topic
So , BIG THANKS FOR THEM !!
I am not responsible for any damage to your phone or brick your phone!
This is the change of all:
Tested on:
Windows XP x32
Windows 7 x64
DropBox Downloads
Let's Begin!
If it helpd, feel free to hit Thanks!
by the way, I just mixed it with Flow-Wolf's Unlock, S-OFF ,Root. This topic
So , BIG THANKS FOR THEM !!
I am not responsible for any damage to your phone or brick your phone!
This is the change of all:
Tested on:
Windows XP x32
Windows 7 x64
DropBox Downloads
Let's Begin!
- Install Android SDK
- Uninstall ALL HTC from your computer. (HTC Sync, for first! )
- Install Attached HTC Drivers (need to reboot your computer!)
- get the latest control bear from the official site download the "windows Ice cream sandwich" one ("windows Gingerbread" one if on gingerbread )
- unzip folders.
- Make Android folder on your pc ( mine is: C:\Android )
- Open SDK tool and install Android SDK Platform Tools and Android SDK Tools (Please update it if your SDK version is r11).
- After you installed look in \android-sdk-windows\platform-tools for 4 file: adb.exe | AdbWinApi.dll | fastboot.exe | AdbWinUsbApi
- Copy the files to Andorid folder.
- Copy the temp_root.bat and temp_root_remove.bat to the same folder.
- Restart your PC to ready for the progress.
- Back up all!!
- Remove and reinsert the battery
- Go to bootloader ( volume down + power on)
- Select factory reset
- DO NOT TOUCH IT, just let it reboot.
- When rebooted skip the Installation tutorial, don't set anything.
- Uncheck Fastboot ( Menu / Settings / Power )
- Check USB Debugging ( Menu / Settings / Dev Options )
- Conenct your phone to the PC via USB cable and select HTC Sync.
- Run the temp_root.bat
- Follow the commads.
- Do NOT TOUCH the device.
- When finished corerctly go to the next paragraph.
- Remove the back from your phone, you must unplug your phone to do that.
- Replug the phone
- Run the ControlBear
- Follow the commads on the screen.
Wire trick:
- take a cable!
- Press the cable on the sdcard protection during 0.5sec, release during 1.75sec press again during 0.5sec.
2 possibilities:
It doesn't work:
1 - Your phone do not restart. Try again
2 - Your phone restart, but stay on the same Juopunut Bear screen. You have an Error Code.
Close the cmd command and run the controlbear.exe again
It works:
Your phone restart. And the CMD said it's done.
- Follow the instuctions on the screen!
- Turn on the phone
- Run remove_temp_root.bat
Hmm your done with the S-OFF
- Insert the files from the root-sensation-windows folder to your Android folder
- Connect your phone to the PC and select Disk Drive
( avoid usb hubs and usb 3.0 ports while connecting ..just connect the device directly to pc/laptop )
- Run root.bat
- Follow the instuctions
Gratz, your done with the root too,
This is a cake-walk
Just download the Rom Manager from Market and isntall CWM with it!
If it helpd, feel free to hit Thanks!