7 CDCs Driver probleme

Search This thread

pedroleroi

Member
Jan 19, 2007
36
0
hello all,

any one can help me with a good step or a good file to install this crap driver (3 hours on 2 computer for nothink)

any help pls,
Best Regards,
Pedroleroi.
 

Nas_sgs2

New member
Apr 18, 2012
1
0
Thank you so very much

I understand!
You need to swith UART and USB settings:
enter UART mode with *#9090# and select "Log via UART"
then
enter *#7284# and select "UART MODEM" and select "USB PDA".
Now Windows ask normal samsung drivers!
That's all.
;)


OMG you have sorted my problem with in minutes...thank-you so very much...
 

garabato

New member
Jan 3, 2009
1
0
reboot with the power button, dont reboot extracting the battery for change the uart mode.
 

wlsuen09

New member
Dec 7, 2012
1
0
Dr_Wolodya,

I try to swith UART and USB settings:
with enter *#9090# and *#7284#,
but the device response "MMI code error",
please help!!
 
Mar 9, 2012
23
19
I have a Tab 2 7.0, and I have the same problem.
My device detects its as 7cds + comneon Suspend and failed to install the drivers.

I've Kies installed but no luck
Switched USB port but result is same
switched PC but same
tried my friend's tab (same like mine) with settings USB->Modem to see weather there is problem with my USB but again no drivers.... i. e. no probs with my tab
Tried Your method but i don't have the "log via UART" instide I have "log via USB" which upon selecting gives me an error ""LOG PATH SET FAIL".
and then on selecting Modem on Diag menu gives me the same responce...

note: I dont have the DM+MODEM+ADB but only modem or PDA option... I guess it said to be "mux menu" for us.. correct me if I am wrong

Please Help me...
 

Top Liked Posts

  • There are no posts matching your filters.
  • 24
    I understand!
    You need to switch UART and USB settings:
    enter UART mode with *#9090# and select "Log via UART"
    then
    enter *#7284# and select "UART MODEM" and select "USB PDA".
    Now Windows ask normal samsung drivers!
    That's all.
    ;)
    1
    Thanks a lotttt !!!
    I understand!
    You need to swith UART and USB settings:
    enter UART mode with *#9090# and select "Log via UART"
    then
    enter *#7284# and select "UART MODEM" and select "USB PDA".
    Now Windows ask normal samsung drivers!
    That's all.
    ;)
    1
    Realy thank you for your support

    Thanks ALOOOOOOOTTTTTT
    1
    I have this problem, but everytime i reboot i have to do this method again. Any ideas on a solution?
    1
    Dr_Wolodya,

    I try to swith UART and USB settings:
    with enter *#9090# and *#7284#,
    but the device response "MMI code error",
    please help!!
    Try restart phone and try again - it work 100% - tested many times.
    Or try reflash phone with stock firmware and try again.