Modified Guide for easier rooting/rom installing steps:
THIS IS FOR THE STOCK SPRINT L710 4.3 OTA SYSTEM
*has been confirmed this works on the Virgin Mobile S3 L710 and the C Spire SCH-L710 running 4.3 OTA*
(if needed, samsung drivers can be found here)
Rooting files:
1st download the all in 1 root folder I put together----> S3 Root Bundle
extract the folder to your desktop (or wherever else you'd like for easy access)
Setting up your phone for rooting:
go to your phones: settings menu>more>about device...scroll down to "Build number" and tap on it several times, you will see a countdown begin that will make you a "developer"...this is necessary to engage the usb debugger mode. once it says "you're now a developer", simply press the back key and you'll see "developer options" now below "date and time".
click on it, enable usb debugging, once done, connect your phone to your computer via usb cord. once it's connected, open the extracted folder you downloaded and copy/paste the 2 following zip files to your SDCard...DO NOT EXTRACT THESE 2 FILES!!
DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0 and UPDATE-SuperSU-v1.93
Flashing Custom Recovery:
once copied over, power off your phone, I usually pull the battery...once powered off, go into to download mode by holding the volume down/home and power keys. you'll see a yellow triangle screen, press volume up to proceed and leave as is! now connect the phone back to the computer and now go back to the extracted folder and run Odin 3.07
once Odin is up, it should recognize the phone by showing it's connected to COM3 (or com whatever number it reads)
now "uncheck" the auto reset option and leave "reset time" checked
now check the box PDA and then load the PDA file from the root folder named: philz_touch_6.00.8-d2spr.tar.md5
now press start...once it's finished, disconnect the phone from the computer and pull the battery
Rooting:
restart the phone by holding: volume up/home and power buttons and you'll now be in the custom recovery menu, red in color.
using touch or the volume buttons to scroll and power button to select, go to: install zip>choose zip from /storage/sdcard1>DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0>Yes-install
once that's done you're going to do the same steps by going back and this time installing UPDATE-SuperSU-v1.93>yes-install...once done, reboot your phone.
once rebooted, go to the app "supersu" and then open it, choose to update SU binary "normal" and then reboot the phone 1 last time...you are now rooted!! go install rooted apps and enjoy!!
*any supersu issues during su binary update, verify via playstore that supersu is up to date*
SuperSu play store link
Custom Roms:
-the 1st 2 listed Roms are official/stable releases based on the 4.3.1 stock rom
Always perform a nandroid backup before flashing any rom files via recovery menu: backup/restore>backup to sdcard1
Cyanogenmod CM10.2 (4.3.1): video tutorial compliments of WoodenDiamond71
-you can bypass the steps in the video of editing the cm10 zip file using notepad ++ because I made/tested the zip file based on his steps and uploaded it along with the gapps zip file needed as well...follow the backing up your phone steps and then transferring the files to your phone and on
-download the needed zip files HERE
follow the video tutorial: WoodenDiamond71's video guide
Slimbean 4.3.1:
download the bundle here
-once extracted, transfer the 2 files: Slim_AIO_gapps.4.3.build.2 and Slim-d2spr-4.3.build.2.2-OFFICIAL-1742 to your sdcard
once transferred, boot into recovery via: power down, hold the volume up, home, and power button all at the same time until you have seen the blue text on the upper left of the screen
Philz recovery has an option called "CLEAN TO INSTALL A NEW ROM" under -wipe data/factory reset
-run this option and say "yes" to installing a new rom
-once wiped, go back and choose install zip>install zip from sdcard1 and flash the 2 transferred files beginning with Slim-d2spr-4.3 1st, then gapps
once reboot has finished and you signed into your accounts to initialize your phone, go to: settings>about device>build number-tap on it until you're a developer to get "developer options" and enable "android debugging". now you're ready to begin installing rooted apps, this rom will run Supersu off the playstore which I highly recommend doing before installing rooted apps.
-download Supersu, open it, update the su binary via normal, reboot once done and begin using rooted apps
Cyanogenmod CM11 (KitKat 4.4.2)-credit goes to WoodenDiamond71 (installation video)
-download the bundled folder here latest release updated in bundle 2/3/14
-once downloaded, extract it
-plug your phone into your computer and transfer the zipped CM11 nightly rom and the zipped Gapps to your sdcard
-this Rom is constantly being updated, so keep up to date by frequently checking HERE and downloading/installing the latest release (to update, simply download the latest zip file by DATE, transfer it over to your sd card and install it via Recovery menu, your phone will be as you left it, settings and all)
video available or follow written steps below link:
CM11 Installation Video Tutorial
-once transferred, boot into recovery via: power down, hold the volume up, home, and power button all at the same time until you have seen the blue text on the upper left of the screen
Philz recovery has an option called "CLEAN TO INSTALL A NEW ROM" under -wipe data/factory reset
-run this option and say "yes" to installing a new rom
once wiped, navigate to INSTALL ZIP, CHOOSE ZIP FROM /STORAGE/SDCARD1 and locate the CM11 zip 1st and flash it
once flashed, locate the gapps zip and flash it, once you have completed all the tasks reboot your phone
once reboot has finished and you signed into your accounts to initialize your phone, go to: settings>about device>build number-tap on it until you're a developer to get "developer options" and enable "android debugging". now you're ready to begin installing rooted apps, this rom uses superuser, to install/use supersu instead:
-download supersu from play store, once downloaded open it and update the su binary via normal, do not reboot yet!! go to supersu settings: under security "enable" su during boot, now reboot and supersu will be used for rooted apps instead of superuser
THIS IS FOR THE STOCK SPRINT L710 4.3 OTA SYSTEM
*has been confirmed this works on the Virgin Mobile S3 L710 and the C Spire SCH-L710 running 4.3 OTA*
(if needed, samsung drivers can be found here)
Rooting files:
1st download the all in 1 root folder I put together----> S3 Root Bundle
extract the folder to your desktop (or wherever else you'd like for easy access)
Setting up your phone for rooting:
go to your phones: settings menu>more>about device...scroll down to "Build number" and tap on it several times, you will see a countdown begin that will make you a "developer"...this is necessary to engage the usb debugger mode. once it says "you're now a developer", simply press the back key and you'll see "developer options" now below "date and time".
click on it, enable usb debugging, once done, connect your phone to your computer via usb cord. once it's connected, open the extracted folder you downloaded and copy/paste the 2 following zip files to your SDCard...DO NOT EXTRACT THESE 2 FILES!!
DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0 and UPDATE-SuperSU-v1.93
Flashing Custom Recovery:
once copied over, power off your phone, I usually pull the battery...once powered off, go into to download mode by holding the volume down/home and power keys. you'll see a yellow triangle screen, press volume up to proceed and leave as is! now connect the phone back to the computer and now go back to the extracted folder and run Odin 3.07
once Odin is up, it should recognize the phone by showing it's connected to COM3 (or com whatever number it reads)
now "uncheck" the auto reset option and leave "reset time" checked
now check the box PDA and then load the PDA file from the root folder named: philz_touch_6.00.8-d2spr.tar.md5
now press start...once it's finished, disconnect the phone from the computer and pull the battery
Rooting:
restart the phone by holding: volume up/home and power buttons and you'll now be in the custom recovery menu, red in color.
using touch or the volume buttons to scroll and power button to select, go to: install zip>choose zip from /storage/sdcard1>DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0>Yes-install
once that's done you're going to do the same steps by going back and this time installing UPDATE-SuperSU-v1.93>yes-install...once done, reboot your phone.
once rebooted, go to the app "supersu" and then open it, choose to update SU binary "normal" and then reboot the phone 1 last time...you are now rooted!! go install rooted apps and enjoy!!
*any supersu issues during su binary update, verify via playstore that supersu is up to date*
SuperSu play store link
Custom Roms:
-the 1st 2 listed Roms are official/stable releases based on the 4.3.1 stock rom
Always perform a nandroid backup before flashing any rom files via recovery menu: backup/restore>backup to sdcard1
Cyanogenmod CM10.2 (4.3.1): video tutorial compliments of WoodenDiamond71
-you can bypass the steps in the video of editing the cm10 zip file using notepad ++ because I made/tested the zip file based on his steps and uploaded it along with the gapps zip file needed as well...follow the backing up your phone steps and then transferring the files to your phone and on
-download the needed zip files HERE
follow the video tutorial: WoodenDiamond71's video guide
Slimbean 4.3.1:
download the bundle here
-once extracted, transfer the 2 files: Slim_AIO_gapps.4.3.build.2 and Slim-d2spr-4.3.build.2.2-OFFICIAL-1742 to your sdcard
once transferred, boot into recovery via: power down, hold the volume up, home, and power button all at the same time until you have seen the blue text on the upper left of the screen
Philz recovery has an option called "CLEAN TO INSTALL A NEW ROM" under -wipe data/factory reset
-run this option and say "yes" to installing a new rom
-once wiped, go back and choose install zip>install zip from sdcard1 and flash the 2 transferred files beginning with Slim-d2spr-4.3 1st, then gapps
once reboot has finished and you signed into your accounts to initialize your phone, go to: settings>about device>build number-tap on it until you're a developer to get "developer options" and enable "android debugging". now you're ready to begin installing rooted apps, this rom will run Supersu off the playstore which I highly recommend doing before installing rooted apps.
-download Supersu, open it, update the su binary via normal, reboot once done and begin using rooted apps
Cyanogenmod CM11 (KitKat 4.4.2)-credit goes to WoodenDiamond71 (installation video)
-download the bundled folder here latest release updated in bundle 2/3/14
-once downloaded, extract it
-plug your phone into your computer and transfer the zipped CM11 nightly rom and the zipped Gapps to your sdcard
-this Rom is constantly being updated, so keep up to date by frequently checking HERE and downloading/installing the latest release (to update, simply download the latest zip file by DATE, transfer it over to your sd card and install it via Recovery menu, your phone will be as you left it, settings and all)
video available or follow written steps below link:
CM11 Installation Video Tutorial
-once transferred, boot into recovery via: power down, hold the volume up, home, and power button all at the same time until you have seen the blue text on the upper left of the screen
Philz recovery has an option called "CLEAN TO INSTALL A NEW ROM" under -wipe data/factory reset
-run this option and say "yes" to installing a new rom
once wiped, navigate to INSTALL ZIP, CHOOSE ZIP FROM /STORAGE/SDCARD1 and locate the CM11 zip 1st and flash it
once flashed, locate the gapps zip and flash it, once you have completed all the tasks reboot your phone
once reboot has finished and you signed into your accounts to initialize your phone, go to: settings>about device>build number-tap on it until you're a developer to get "developer options" and enable "android debugging". now you're ready to begin installing rooted apps, this rom uses superuser, to install/use supersu instead:
-download supersu from play store, once downloaded open it and update the su binary via normal, do not reboot yet!! go to supersu settings: under security "enable" su during boot, now reboot and supersu will be used for rooted apps instead of superuser
Last edited: