Polaris 3650 Fully DEAD after MTTY task 2a

Search This thread

h4ckt4rus

New member
Jan 7, 2009
1
0
Hey,
this is my first post, and i 've a bad experience to tell u

I execute the bad command task 2a on MTTY and i brick my poor polaris...
this is the output on mtty:
Cmd>task 32

Cmd>task 28
Format start
Fill RSVD information for block 288 to 309
Storage start sector=0xD780, total sector=0xDB40
Storage start block=883, total block=877
Total Bad Block in CE: 1

Erase physical block from 1174 to 2032

si backup: Erase physical block from 2032 to 2048

Format end

Cmd>task 2A
Format ALL start
backup SPL OK
backup MISC configuration OK
SPL start start block=288, total block of CE=1760
ERASE block 878 FAIL !!!
Write 0xFF start page=0x4800, total page=0x1B800

SPL version and MFG TAG are same, skip it.
restore SPL OK
restore MISC configuratoin OK
restore MFG configuratoin OK
Format ALL end

Cmd>info

Cmd>info 8

--- 2K bytes sector version ---

DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40

Checking block information

BLOCK 878 (0x36E) is bad block
OS NOT FOUND !!!


Cmd>task 8


and finally i found my phone dead, when i press the power button nothing happen i have always blank screen, i try with any possible solution, hard-reset (i can't put in bootloader mode), FrankenKaiser tool but my phone accept only command setboot and nothing else.... (always invalid command) :(
Is there any working method to unbrick?
Can htc service resolve my dreadful issue??

Thanks to everybody
 

jakketto

Member
Oct 26, 2007
10
0
Hi there,
i've the same problem, MTTY can't accept any command rather than the default security locked commands.
I believe it's not fully bricked as i can connect via the MotoQ drivers and issue some mtty command, but i've erased all SPL, OS and bootloader, so i wish to recover it using also your intelligence and skillsets.

Anyone can help me?

Thank you!

Jakk
 

jakketto

Member
Oct 26, 2007
10
0
It doesn't work, since that executable doesn't work! I guess it is a fake.

Sent from my Liquid using XDA App
 

jakketto

Member
Oct 26, 2007
10
0
Hi,
I've run it from a DOS prompt, but the executable gave me an error regarding some .NET and other missing library....

Sent from my Liquid using XDA App
 

meknb

Senior Member
Nov 21, 2008
268
11
Merseyside
Id guess your missing .net framework without knowing the errors or os i dont know.Try posting more informative answers other than "it doesnt work" you might get more help.If you can connect with mtty it can probably be recovered,but it's harder to recover than to brick.
 

ion_plugged

Senior Member
Aug 26, 2008
63
2
well hi....

my polaris is dead. managed to conect mtty wia motoq drivers and mtty. issued commands but canot dwl frankenkaiser :( and a polaris 200 spl
 

Hakim Rahman

Senior Member
Oct 28, 2010
3,036
802
in here
my polaris is dead. managed to conect mtty wia motoq drivers and mtty. issued commands but canot dwl frankenkaiser :( and a polaris 200 spl

I think FrankenKaiser by JockyW can not run on yours, because the existing version of the SPL in the package contrary to the SPL that you use ...! can you understand it, so you should be able to modify it. if you do not get any better you PM just JockyW on condition .......... you'd better ask him directly on what the requirements :p:p