[STOCK ROM][Root][FTF] Xperia Tablet Z (SGP311) 10.4.1.B.0.109 VMo De

Search This thread

bernddi

Member
Apr 7, 2013
25
17
Hello,

I want to share my firmware files. So here is the standard FTF file for the german SGP311: [click] [click2]
MD5 F2E1786CA1632EDA5097A24EFAFFC73D

I also rooted the firmware following the thread of [NUT] : [click]

So for rooted 4.3 you will need these files: [click] [click2]

MD5 for FTF 091714BF9B1C67957B4EC22774043F34
MD5 for zip 23075426FAE5D117A9CBA7BC338A1D10


To install you need to be rooted and have a recovery installed (for example Dual Recovery, again by [NUT]:
http://xdaforums.com/showthread.php?t=2261606

  1. Unpack the zip so you get two files: Annother zip and an ftf file
  2. Put the zip on your sd card
  3. Flash the zip via recovery
  4. In recovery shut down
  5. Start flashtool. Get your tablet into flashmode and flash the stripped FTF provided
  6. After flashing finished, enjoy rooted Tablet

The files are tested and okay. But I am not responsible if you brick your tablet.
All credits and thanks to [NUT].
 
Last edited:

Alx31

Senior Member
May 15, 2013
5,583
8,370
43
Hi

The very first link... your ftf file, is it modified?
And also is it unbranded that fw?

Thanks u by advance..
 

bernddi

Member
Apr 7, 2013
25
17
Hi

The very first link... your ftf file, is it modified?
And also is it unbranded that fw?

Thanks u by advance..

No, its the oiriginal ftf from the pc companion. And its for SGP311, so as far as I know there are no branded firmwares for, because it has no lte module. In other words: Yes, it is unbranded.
 
  • Like
Reactions: Alx31

Miro24h

Senior Member
Jul 2, 2013
66
2
To be clear i didnt understand this root method can u give us the steps in a clear way even if detailed because i get lost in NUT'S method

Sent From SGP311
Android OS: 4.3
Root Status: Not Rooted
Bootloader: Locked
Build Number: 10.4.1.B.0.109
Other Devices: MT27i
 

donedos

Senior Member
Jul 8, 2012
394
129
Bacolod
Hello,

I want to share my firmware files. So here is the standard FTF file for the german SGP311: [click] [click2]
MD5 F2E1786CA1632EDA5097A24EFAFFC73D

I also rooted the firmware following the thread of [NUT] : [click]

So for rooted 4.3 you will need these files: [click] [click2]

MD5 for FTF 091714BF9B1C67957B4EC22774043F34
MD5 for zip 23075426FAE5D117A9CBA7BC338A1D10


To install you need to be rooted and have a recovery installed (for example Dual Recovery, again by [NUT]:
http://xdaforums.com/showthread.php?t=2261606

  1. Unpack the zip so you get two files: Annother zip and an ftf file
  2. Put the zip on your sd card
  3. Flash the zip via recovery
  4. In recovery shut down
  5. Start flashtool. Get your tablet into flashmode and flash the stripped FTF provided
  6. After flashing finished, enjoy rooted Tablet

The files are tested and okay. But I am not responsible if you brick your tablet.
All credits and thanks to [NUT].


Thanks for the procedure.. I have one favor to ask, can you upload the stripped ftf file only...? i am having problem downloading the whole .109 firmware due to its size.. :).. hope you can upload it here....

I guess all I need are just stripped ftf of .109 and the recovery zip of .109 firmware to be rooted in the latest .109 firmware since i'm already rooted and has recovery in .577 4.3...

Thanks in advance..

Edit Comment: stripped ftf and Zip file is included in the .rar..thanks! i'll try this when i got home.. :D
 
Last edited:

bernddi

Member
Apr 7, 2013
25
17
Please report if it worked. I dont think that flashing the stripped ftf alone will be enough. At least you will stay with the old kernel. I recommed doing the whole procedure.
Also I cannot upload anything at the moment because I am on vacation.

To the guy who does not know how it works: I can write a more detailed guide when I am back. For the moment You should read my post again. You can find every information you need in this forum. Have a closer look at the development section. There should be a thread about how to root 4.3 with locked bootloader.

Sent from my GT-S5830 using xda app-developers app
 
  • Like
Reactions: donedos

donedos

Senior Member
Jul 8, 2012
394
129
Bacolod
Please report if it worked. I dont think that flashing the stripped ftf alone will be enough. At least you will stay with the old kernel. I recommed doing the whole procedure.
Also I cannot upload anything at the moment because I am on vacation.

To the guy who does not know how it works: I can write a more detailed guide when I am back. For the moment You should read my post again. You can find every information you need in this forum. Have a closer look at the development section. There should be a thread about how to root 4.3 with locked bootloader.

Sent from my GT-S5830 using xda app-developers app

what i will do later will be:

1.) Put the zip to the sdCard and flash it using CWM.
2.) Power it off. and flash the stripped ftf using flashtool.
3.) then Reboot...

hope it will work, it works fine before from .370 (US ftf) to .577 (Nordic ftf)...I am currently rooted at 4.3 .577.
will update later...Btw, thanks again for the files... :good:

Edited: Confirmed!!! It works using above procedure. apps and data still there and fine,...Now running .109 4.3 firmware. Thanks.
 
Last edited:

Jambu95

Senior Member
Jun 1, 2013
207
29
zip is corrupted
! C:\Users\LJC\Downloads\SGP311_rooted.part1.rar: CRC failed in SGP311_10.4.1.B.0.109_VMo De.zip. The file is corrupt
! C:\Users\LJC\Downloads\SGP311_rooted.part1.rar: Unexpected end of archive
! C:\Users\LJC\Downloads\SGP311_rooted.part1.rar: Packed data CRC failed in SGP311_10.4.1.B.0.109_VMo De.zip. The volume is corrupt
! C:\Users\LJC\Downloads\SGP311_rooted.part2.rar: CRC failed in SGP311_10.4.1.B.0.109_VMo De_stripped.ftf. The file is corrupt
! C:\Users\LJC\Downloads\SGP311_rooted.part2.rar: Unexpected end of archive
 

donedos

Senior Member
Jul 8, 2012
394
129
Bacolod
zip is corrupted
! C:\Users\LJC\Downloads\SGP311_rooted.part1.rar: CRC failed in SGP311_10.4.1.B.0.109_VMo De.zip. The file is corrupt
! C:\Users\LJC\Downloads\SGP311_rooted.part1.rar: Unexpected end of archive
! C:\Users\LJC\Downloads\SGP311_rooted.part1.rar: Packed data CRC failed in SGP311_10.4.1.B.0.109_VMo De.zip. The volume is corrupt
! C:\Users\LJC\Downloads\SGP311_rooted.part2.rar: CRC failed in SGP311_10.4.1.B.0.109_VMo De_stripped.ftf. The file is corrupt
! C:\Users\LJC\Downloads\SGP311_rooted.part2.rar: Unexpected end of archive

I think you extracted the .rar 1 & 2 incorrectly. to unpacked it correctly, highlight both .rars part1 and part2 then right click to "extract to" or "extract here" using 7zip( or whatever unpacking software you have)...

Hope it helped you.. God Bless.. :)
 

Jambu95

Senior Member
Jun 1, 2013
207
29
I think you extracted the .rar 1 & 2 incorrectly. to unpacked it correctly, highlight both .rars part1 and part2 then right click to "extract to" or "extract here" using 7zip( or whatever unpacking software you have)...

Hope it helped you.. God Bless.. :)

it doesn't work, but hx for replying anyway, still looking for a solution
 

michpan

Member
Jan 22, 2007
25
3
I used this method to update my tablet and gain root successfully! Thanks!

I used this thread in the past to root my tablet: http://xdaforums.com/showthread.php?t=2590602 and I used it again to flash the recovery needed to flash this ROM. If you don't have a custom recovery you can flash the bin file from the above thread..

Sent from my GT-N5110 using Tapatalk
 

Aid777

Senior Member
Jul 31, 2012
285
35
North Yorkshire
Samsung Galaxy S21+
I wish to root SGP311 UK 10.4.1.B.0.109
I have a FTF file but no separate smaller zip file. I don't know what to do next!
I have flash tool installed...
Is Fastboot? mode enabled (get-into) by pressing the volume up key at the same time as you plug in a usb cable?
Please help!
 
Last edited:

donedos

Senior Member
Jul 8, 2012
394
129
Bacolod
I wish to root SGP311 UK 10.4.1.B.0.109
I have a FTF file but no separate smaller zip file. I don't know what to do next!
I have flash tool installed...
Is Fastboot? mode enabled (get-into) by pressing the volume up key at the same time as you plug in a usb cable?
Please help!

1.) I suggest you simply flash 10.1.C.0.370 firmware and root it using the attached file below.
2.) install the latest dual recovery by NUT.
3.) then follow this:

Try this bro for. 577
http://xdaforums.com/show....php?t=2588442

Or try this on the new firmware .109
http://xdaforums.com/show....php?t=2671276


two important things, you should be rooted and has a recovery installed before proceeding the update and retain the root .
 

Attachments

  • rootkitTabZwifi_JB_0_370.zip
    2 MB · Views: 72

moesus

Senior Member
Nov 4, 2009
119
23
I can also confirm this works :D
Went from a rooted 4.3 to this new version with keeping root. Both zip files extracted just fine.

Thank you!! :good:
 

tiunilohmu

Senior Member
Dec 27, 2006
376
49
Hello,

I want to share my firmware files. So here is the standard FTF file for the german SGP311: [click] [click2]
MD5 F2E1786CA1632EDA5097A24EFAFFC73D

I also rooted the firmware following the thread of [NUT] : [click]

So for rooted 4.3 you will need these files: [click] [click2]

MD5 for FTF 091714BF9B1C67957B4EC22774043F34
MD5 for zip 23075426FAE5D117A9CBA7BC338A1D10


To install you need to be rooted and have a recovery installed (for example Dual Recovery, again by [NUT]:
http://xdaforums.com/showthread.php?t=2261606

  1. Unpack the zip so you get two files: Annother zip and an ftf file
  2. Put the zip on your sd card
  3. Flash the zip via recovery
  4. In recovery shut down
  5. Start flashtool. Get your tablet into flashmode and flash the stripped FTF provided
  6. After flashing finished, enjoy rooted Tablet

The files are tested and okay. But I am not responsible if you brick your tablet.
All credits and thanks to [NUT].

Can you make one flashable zip for spg312 US?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    Hello,

    I want to share my firmware files. So here is the standard FTF file for the german SGP311: [click] [click2]
    MD5 F2E1786CA1632EDA5097A24EFAFFC73D

    I also rooted the firmware following the thread of [NUT] : [click]

    So for rooted 4.3 you will need these files: [click] [click2]

    MD5 for FTF 091714BF9B1C67957B4EC22774043F34
    MD5 for zip 23075426FAE5D117A9CBA7BC338A1D10


    To install you need to be rooted and have a recovery installed (for example Dual Recovery, again by [NUT]:
    http://xdaforums.com/showthread.php?t=2261606

    1. Unpack the zip so you get two files: Annother zip and an ftf file
    2. Put the zip on your sd card
    3. Flash the zip via recovery
    4. In recovery shut down
    5. Start flashtool. Get your tablet into flashmode and flash the stripped FTF provided
    6. After flashing finished, enjoy rooted Tablet

    The files are tested and okay. But I am not responsible if you brick your tablet.
    All credits and thanks to [NUT].
    1
    Hi

    The very first link... your ftf file, is it modified?
    And also is it unbranded that fw?

    Thanks u by advance..

    No, its the oiriginal ftf from the pc companion. And its for SGP311, so as far as I know there are no branded firmwares for, because it has no lte module. In other words: Yes, it is unbranded.
    1
    Please report if it worked. I dont think that flashing the stripped ftf alone will be enough. At least you will stay with the old kernel. I recommed doing the whole procedure.
    Also I cannot upload anything at the moment because I am on vacation.

    To the guy who does not know how it works: I can write a more detailed guide when I am back. For the moment You should read my post again. You can find every information you need in this forum. Have a closer look at the development section. There should be a thread about how to root 4.3 with locked bootloader.

    Sent from my GT-S5830 using xda app-developers app