LG G2 Stock Firmware (Go Back to Stock)
- Thread starter hyelton
- Start date
i just want to say a BIG THANKS because i was going crazy ! worked great on d802 international model and now i m on stock !
Hi can someone help me out please. I have a D802 32gb but fairly sure it has a Hong/ South Korean based ROM on it that does not give all the network options so 4g disappears following a reboot, and in network mode selection is not available.
Which is the best stock rom on here to go for? I keep reading about them all and some are not loading on properly, and some only work for the 16gb and then there are the custom ones on the D802 page. Which ROM is stable, will work with the 32gb and still have the features like knock on etc working well? I have done a lot of reading and am in a bit of a spin with it all to be honest over which to go for. Advice much appreciated!
Which is the best stock rom on here to go for? I keep reading about them all and some are not loading on properly, and some only work for the 16gb and then there are the custom ones on the D802 page. Which ROM is stable, will work with the 32gb and still have the features like knock on etc working well? I have done a lot of reading and am in a bit of a spin with it all to be honest over which to go for. Advice much appreciated!
I have NOW Added the Sprint Version for Returning back to stock 
Click the Link in the OP
Click the Link in the OP
I have NOW Added the Sprint Version for Returning back to stock
THANK YOU!
Do I want to set country to republic of korea?
Last edited:
I have NOW Added the Sprint Version for Returning back to stock
Thanks a lot for your work sir... i just want to ask, where can i get the D80210b-HKG-XX stock firmware?? because when i click on the link in the OP for the hong kong firmware, it says PAGE NOT FOUND. Thanks again..
Cheers Wars. I tried Win XP 32bit but did not resolve. Luckily, I then applied a Factory Reset via the different button combinations on startup of my D802. http://xdaforums.com/showthread.php?t=2448775 Luckily it took me back to TWRP and I could then restore my backup.
Last edited:
I have NOW Added the Sprint Version for Returning back to stock
First of all, thank you!
Can anyone confirm that these files are working on a Sprint LS980ZV7? I've got FlashTool running, selected the dll and .tot, reconencted the USB, and get a Download FAIL
PID: xxxxxxxxxxxxxxxxxx
IMEI: xxxxxxxxxxxxxxx
Model: G2
DLL: LS980
BIN: LS980ZV7_01.TOT
SWV: LS980ZV7_01
SWOV: LS980ZV7_01
Device Model is different!
Check Phone or DLL!
00000000
What did you have on your phone before? Was it a rom or cm? Then that's why. You will need to change your build.prob in the rom to make it think it's a LS980 again
Sent from my iPhone using Tapatalk
It had the stock rom, but my build.prop got corrupted, which started this whole mess. I can't get it to edit it, my only options are download mode, and a recovery mode where I can send 'adb sideload' however it seems to fail when I send anything. I can't adb pull/push/shell etc otherwise it's just a boot loop with an LG logo.
I had a similar issue running PA and was unable to flash back to stock, as soon as I used a stock build.prop from a stock system dump the flash went thru! Just re-read I would re-flash a rom so that you can boot up then change the build.prop if possible good luck.
Last edited:
Thanks!
Just wanted to say thanks
Flashed my ebay sourced (UKBNSUK) 32Gb G2 from D80210b-HKG-XX to D80210b-EUR-XX.
No real reason to do this other than getting an English keyboard as default after a hard reset.
Now that's worked I might try a custom rom :good: (coming from years in the iPhone wilderness so this is all new to me)
Just wanted to say thanks
Flashed my ebay sourced (UKBNSUK) 32Gb G2 from D80210b-HKG-XX to D80210b-EUR-XX.
No real reason to do this other than getting an English keyboard as default after a hard reset.
Now that's worked I might try a custom rom :good: (coming from years in the iPhone wilderness so this is all new to me
)
force70
Senior Member
Just wanted to say thanks
Flashed my ebay sourced (UKBNSUK) 32Gb G2 from D80210b-HKG-XX to D80210b-EUR-XX.
No real reason to do this other than getting an English keyboard as default after a hard reset.
Now that's worked I might try a custom rom :good: (coming from years in the iPhone wilderness so this is all new to me
May i ask which link did you get that firmware from?
Sent from my LG-D802 using xda app-developers app
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
795[CENTER]Common Questions and Problems KDZ Method:
1.Network connection error is NORMAL, move the window over and you'll see its actually most likely flashing
2.If your getting errors when doing the kdz method and running a custom rom that could be the problem and you'll need to use the TOT method.
3. Getting connection errors? Check under device manager to make sure you see LG something related under communication ports (Windows 8/10 ports might be hidden)
Make sure your using a USB 2.0 port!! USB 3.0 will NOT work.
Common Questions and Problems TOT Method:
If having an issue try and choose Board_ID on the TOT/DLL selection screen.
Make sure you've set your COM port to COM41
If device does not start flashing besure you unplug and replug the device
Make sure your using a USB 2.0 port!! USB 3.0 will NOT work.[/CENTER]117Here are all the current KDZ files for flashing Your G2 Back to Stock, I have updated the Link below with the AT&T, T-Mobile, Verizon,Sprint, and Korean, Asia, Pretty much of all them now!. READ!!! The first Guide Below is to Return To STOCK For ALL Varrients!! EXCEPT for the AT&T Please read below for the steps to return to stock on AT&T
NOTICE! - IF you download fails or does not download all the way USE A DOWNLOAD MANAGER!, Files that are usually over 1GB browsers have issues downloading them espseically if you have a slow connection.
First Off Not Responsible if you flash the wrong one!!!!
Please Check to make sure you don`t flash a 16GB firmware on an 32GB device. Please check the file names if they have an "16GB" in the File Name
THIS Guide Below for All Versions EXCEPT the AT&T Version (For AT&T & Sprint Scroll Down more)
How to flash ROM KDZ Method
First off I`d like to THANK @quangnhut123 for making a new way & easy way to flash the KDZ Method!!
The Files are Hosted on my server for fast speeds! Most if not all NEEDED KDZ files are on my Server
1). Download all The Files Below!
1) Firmware Files - HERE!
Or Here LGKDZ.com for your exact match KDZ for your model
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW_United_v2.11.1.exe - 7.8 Mb
3) Download LG Flash Tool 2014 tool and extract - LG_Flash_Tool_2014.zip - 3.1 Mb
4) Enter to Download Mode and plug USB into your PC
5) Run LGFlashTool2014.exe and do as following pictures :
(If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library) - Download HERE
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
No need to choose desired language, it automatically change to English as a default setting.
Wait until 100% to complete !
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
_______________________________________________________________________________________________________________________________
2015 (updated with pictures) TOT Method!
RETURN TO STOCK TOT METHOD!, AT&T, T-Mobile, Sprint, Verizon, & a The few International TOT`s that are available
How to Flash YouTube Video:
1.Download Everything!
1.1)Download Both Stock Image & DLL File – Download Here
1.2)Download LG FlashTools V1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
1.3)Download Drivers (Any LG Phone) - Here (Verizon Only) – Here
1.4)Megalock DLL File - Megalock.dll Download
(Hint) If your getting wrong dll/Wrong model error after having to start to flash and it fails use this DLL file instead of your model DLL file: LGUP_8974.dll - 1.4 Mb
This error means you where running a rom not meant for or built on a different model#.
Install:
2.Install LG Drviers
3.Install Flashtool (Don’t run it yet)
4.Extract the TOT file from the Zip
5.Copy MegaLock.dll file to C:\LG\LGFlashtool (This might be a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file)
6.Power off your Device & or pull battery (G3),(G Pro),(G Flex)
7.Press and hold the Vol UP Key and plug in the USB cable to your phone you should now see “Firmware Update/Download Mode” and be in Download mode.
8.Open up Device Manger on your PC
8.1)Click on ports and double click LGEModem
8.2)Go to Port Settings Tab and click Advanced
8.3)Change COM Port to COM41 and click Okay.
8.4)After this you may need to rereboot your phone back into download mode.
9.Run LG Flashtool as Administrator
10.Select Manual Mode at the top
11.Click The DLL Box and choose the DLL file from Above meant for your device
12.Click the S/W box and select the firmware file with the .tot extension, Then Click OK when done.
13.Now Click the Yellow Arrow Button at the top left, The Firmware install will be triggered
14.You may need to unplug/replug phone before Firmware install will start (If it does nothing after clicking the yellow button
15. Should take anywhere between 4-8 Minutes, When its done your phone should reboot
Do NOT Close the FlashTool Window during firmware update.
99% of the time FlashTool will FAIL after 85% anything after 85% is just your phone rebooting so your safe
_____________________________________________________________________________________________________________________________
Remember if you have bootloop or stuck on LG Logo after flashing make sure you FACTORY RESET!
Extra Important Info:
To Fix ANY Driver issues make sure you reboot your computer after removing and then reinstall again, Also try different USB ports or USB cable or try another PC.
Also try this for any driver issues: http://xdaforums.com/showpost.php?p=53313255&postcount=5400
To Fix "Knock On" from not working - Thanks too - @wassk "If ur phone is d802 then open ur dialer type there 3845#*802# when hidden menu opens check for settings....press settings and inside u have Update Touch Firmware...press that and wait for 10-15 seconds....then close this and try again ur screen...maybe will help"
BEFORE POSTING IN THIS THREAD. DON`T POST ANY LINKS TO the LG-FIRMWARE site as most of there links are not even working, and also make you see an AD for 5 seconds to make money off of you for a dead link they are not even hosting they are just thieving off LG`s Servers and making money on it. Anyone That posts a link to it will be reported to the Mods or asked to remove. Thank You.!
____________________________________________________________________________________________________________________________________________________
My Links are ALWAYS hosted on MY servers for NO Downtime! If My site does NOT have what your looking for PM me or post what you want and I will try and get it for you
Feel Free to buy me a Beer if you feel I have helped you Thank you!
Thank you so much!
Donations: @avinash Rajkumar, @penone1130, @nilesd28LGUP Method:Flashes both KDZ & TOT files:
Thanks to @shakeyabooti for LGUP!
Download LGUP from HERE
Install the file with the DLL name in them first and then LGUP_Install_Ver_1_14_3 Then copy the folder "common" to C:\Program Files (x86)\LG Electronics\LGUP\model (this should resolve unknown error)
Make sure you have downloaded the required KDZ file MM or LP
Open LGUP on your computer "make sure your phone is plugged in"
ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONNECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it.
LG Drivers: in First post
TO DO A FULL WIPE AND INSTALL MM - Open the LGUP on your computer. FILE PATH point it towards the MM KDZ.
IMPORTANT!!!!!!! shut down LGUP!
Now open LGUP again - you will notice that the MM KDZ will still be showing in the FILE PATH section. Select REFURBISH and make sure BIN file is ticked. Press Start. Make cup of tea and be patient
TO GO BACK TO LP FROM MM - Open LGUP on your computer, click on FILE PATH and point it towards your LP KDZ. Close LGUP and re-open LGUP. Make sure you select REFURBISH this will do a FULL wipe, tick BIN file. Press Start. Make cup of tea and be patient
Video Guide: (Thanks to @KiaTheKing
https://www.youtube.com/watch?v=iPKcuYwDoxY
--------------------------------------------------------------------------------------------------------------------------------------------------14I have now Updated the link above which now has the T-Mobile and Verizon Versions :
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/12use the megalock.dll , to enable your lg flash tools
You can download the megalock.dll and place it to the folder of the lg flash tools
